Production of exocellular polysaccharide by azotobacter chroococcwn

Environmental conditions affect the production of extracellular polysaccharide by Azotobacter chroococcum ATCC 4412. Production of exocellular polymer from a variety of carbon sources depended on the air flow rate. A high sucrose concentration in medium (8%) markedly favored expopolysaccharide production, which reached 14 g/L in about 72 h. In cell suspensions incubated in the presence of 8% sucrose in a nitrogen-free medium, biopolymer final concentration of 9 g/L corresponds to 68 g/g biomass. Maximum efficiency of sucrose conversion into exopolysaccharide peaked at 70% for initial disaccharide concentration of 6%. High performance liquid chromatography and gas liquid chromatography of acid hydrolysates of the exopolymer revealed the presence of mannuronosyl, guluronosyl, and acetyl residues, but not neutral sugars. The infrared spectrum corroborated the presence of carboxylate anions and O-acetyl groups in the exopolymer. Though the presence of more than one kind of polysaccharide cannot be ruled out, these data suggest that, under the experimental conditions used in this work, only a type of alginate-like exopolysaccharide is produced by A. chroococcum ATCC 4412.     

The Forwarding Indices of Random Graphs

A routing R of a graph G is a set of n(n ? 1) elementary paths R(u, v) specified for all ordered pairs (u, v) of vertices of G. The vertex-forwarding index ξ(G) of G, is defined by Where ξ(G, R) is the maximum number of paths of the routing R passing through any vertex of G and the minimum is taken over all the routings of G. Let G_p denote the random graph on n vertices with edge probability p and let m = np. It is proved among other things that, under natural growth conditions on the function p = p(n), the ratio Tends to 1 in probability as n tends to infinity.     

Effect of ionic interactions on the oxidation of Fe(II) with H2O2 in aqueous solutions

The oxidation of Fe(II) with H₂O₂ has been measured in NaCl and NaClO₄ solutions as a function of pH, temperature T (K) and ionic strength (M, mol-L^–1). The rate constants, k (M^–1-sec^–1), d[Fe(II)]/DT=-k[Fe(II)][₂O₂]at pH=6.5 have been fitted to equations of the formlog k = log k₀+ AI ^1/2+BI+CI ^1/2/T Where log k₀=15.53-3425/T in water; A=–2.3, –1.35; B=0.334, 0.180; and C=391, 235, respectively, for NaCl (=0.09) and NaClO₄ ( =0.08). Measurements made in NaCl solutions with added anions yield rates in the order B(OH) ₄ ^– >HCO ₃ ^– >ClO ₄ ^– >Cl^–>NO ₃ ^– >SO ₄ ^2– and are attributed to the relative strength of the interactions of Fe²⁺ or FeOH⁺ with these anions. The FeB(OH) ₄ ⁺ species is more reactive while the FeCO ₃ ⁰ , FeCl⁺, FeNO ₃ ⁺ and FeSO ₄ ⁰ species are less reactive than the FeOH⁺ ion pair. The general trend is similar to our earlier studies of the oxidation of Fe(II) with O₂ except for B(OH) ₄ ^– . The effect of pH on the logk was found to be a quadratic function of the concentration of H⁺ or OH^– from pH=4 to 8. These results have been attributed to the different rate constants for Fe²⁺ (k₀) and FeOH⁺ (k₁) which are related to the measured k by, k=k_0Fe + k_1FeOH, where _i is the molar fraction of species i. The rates increase due to the greater reactivity of FeOH⁺ compared to Fe²⁺. k₀ is independent of composition and ionic strength but k₁ is a function of ionic strength and composition due to the interactions of FeOH⁺ with various anions.     

A potential model for the study of ices and amorphous water: TIP4P/Ice

The ability of several water models to predict the properties of ices is discussed. The emphasis is put on the results for the densities and the coexistence curves between the different ice forms. It is concluded that none of the most commonly used rigid models is satisfactory. A new model specifically designed to cope with solid-phase properties is proposed. The parameters have been obtained by fitting the equation of state and selected points of the melting lines and of the coexistence lines involving different ice forms. The phase diagram is then calculated for the new potential. The predicted melting temperature of hexagonal ice (Ih) at 1 bar is 272.2 K. This excellent value does not imply a deterioration of the rest of the properties. In fact, the predictions for both the densities and the coexistence curves are better than for TIP4P, which previously yielded the best estimations of the ice properties.     

Application of microwave-assisted micellar extraction combined with solid-phase microextraction and high-performance liquid chromatography with UV detection for the determination of organochlorine pesticides in different mud samples

Abstract

A sequential injection analysis method for the simultaneous spectrophotometric determination of phosphate and silicate has been developed. The method is based on the different reaction rates of the heteropolymolybdate formation reactions. Concentrations within the range 0.026—0.485 mmol P l^?1 and 0.125—2.848 mmol Si l^?1 have been determined at a frequency of 30 samples per hour. An R.S.D. of 2.1% was obtained for 0.162 mmol P l^?1 and of 1.1% for 1.424 mmol Si l^?1. The method was found to be suitable for the determination of phosphate and silicate in wastewater.     

Synthesis of Potassium 4-(alkoxycarbonylthio)- and 4- (Aalkoxythiocarbonylthio)-3,5-Dinitrobenzenesulfonates as Amphiphiles

The titled compounds are prepared by reaction of potassium 4-chloro-3, 5-dinitrobenzenesul-fonate with potassium O-alkylthiocarbonates or O-alkyldithiocarbonates with yields higher than 70%.     

Use of decomposition of portlandite in concrete fire as indicator of temperature progression into the material

In field structures affected by fire, the temperature progress through the material. The progression of temperature in the concrete material can be determined by simultaneous differential thermal analysis and thermogravimetry. Also, the analysis of the behaviour of concrete in real concrete, by different techniques, permits the corroboration of the hypothesis of cover calculation. In this study, the analysis of concrete exposed to a very severe fire is studied in order to corroborate the calculus hypothesis and to determine the progression of the temperature inside the affected structure. In this study, the potentiality of the thermal instrumental techniques is studied to determine the situation of the concrete exposed to fire. These results can be used to calculate the residual strength of the concrete structural elements. Also, other auxiliary techniques are used to have some supplementary information about the situation of the concrete exposed to fire. The results are based in concrete samples from a real fire in the Windsor Building in Madrid. The Windsor Building in Madrid was project in 1974 and built between 1975 and 1979. This building was severely damaged by a serious fire on the 12th of February 2005, which lasted approximately 12?h.     

Existence of maximizers for Sobolev–Strichartz inequalities

We prove the existence of maximizers of Sobolev–Strichartz estimates for a general class of propagators, involving relevant examples, as for instance the wave, Dirac and the hyperbolic Schrödinger flows.