The diffusioosmosis of an electrolyte solution inside a uniformly charged rectangular channel at steady locally developed conditions is the subject of this study. Utilizing a finite element based numerical procedure, we try to estimate the errors incurred by modeling the actual rectangular geometry of typical microchannels as a slit. We demonstrate that the flow pattern and direction are generally dependent upon the width‐to‐height ratio of the channel. Such a finding, besides showing the ineffectiveness of the slit geometry in representing a rectangular channel of small aspect ratio, informs us of another mechanism of controlling the diffusioosmotic flow. Inspections of the mean velocity reveal that, although it drastically grows by increasing the aspect ratio at smaller values of this parameter, no significant change is observed when the aspect ratio is 5 or higher. The same trend is observed when EDL is shrunk and is considered as a basis for the introduction of a slip‐like velocity, similar to the concept of the Helmholtz–Smoluchowski electroosmotic velocity, which will be of high practical importance when dealing with a micronsized channel. Because of its significance, an expression is presented for this slip velocity utilizing the curve fitting of the results, assuming a typical Peclet number. 相似文献
TiO2 nanoparticles in anatase and rutile forms was characterized and studied by several techniques including X‐ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM) and successfully applied as an efficient and heterogeneous catalyst in the synthesis of 1,8‐dioxo‐decahydroacridines via the one‐pot multi‐component condensation reaction of dimedone with aromatic aldehydes and ammonium acetate or aromatic amines under mild and solvent‐free conditions. 相似文献
We describe the synthesis of a layered zinc hydroxide‐dodecyl sulfate organic–inorganic hybrid nanocomposite as a new solid‐phase microextraction fiber. The fiber coating can be prepared easily in a short time and the reaction is at room temperature; it is mechanically stable and exhibits relatively high thermal stability. The synthesized layered zinc hydroxide‐dodecyl sulfate nanocomposite was successfully prepared and immobilized on a stainless steel wire and evaluated for the extraction of aromatic compounds from aqueous sample solutions in combination with gas chromatography and mass spectrometry. The method yields good results for some validation parameters. Under optimum conditions (extraction time: 15 min, extraction temperature: 50°C, desorption time: 1 min, desorption temperature: 250°C, salt concentration: 0.5 g/mL), the limit of detection and dynamic linear range were 0.69–3.2 ng/L and 10–500 ng/L, respectively. The method was applied to the analyses of benzene, toluene, ethylbenzene, and o‐, p‐, and m‐xylenes in two real water samples collected from the Aji river and Mehran river, Tabriz, Iran. Under optimum conditions, the repeatability and reproducibility for one fiber (n = 3), expressed as the relative standard deviation, was 3.2–7.3% and 4.2–11.2% respectively. The fibers are thermally stable and yield better recoveries than conventional methods of analysis. 相似文献
The authors describe a method for the trace determination of copper (II) and lead (II) in water and fish samples using solid-phase extraction via siliceous mesocellular foam functionalised by dithizone. Siliceous mesocellular was functionalised with dithizone, and the resulting sorbent was characterised by scanning electron microscopy, surface area analysis, thermogravimetric/differential thermal analysis and FTIR. Following solid-phase extraction of target ions by the sorbent, copper and lead ions were quantified by flame atomic absorption spectrometry. Factors affecting the sorption and desorption of target ions by the sorbent were evaluated and optimised. The calibration plot is linear in the 1 – 500 μg L?1 copper (II) and 3–700 μg L?1 lead (II) concentration range. The relative recovery efficiency in real sample analysis is in the range from 96 to 102%, and precision varies between 1.7 and 2.8%. It is should be noted that the limits of detection for the copper and lead analysis were 0.8 and 1.6 μg L?1, respectively. Also, the adsorption capacities for copper and lead ions were 120 and 160 mg g?1, respectively. The obtained pre-concentration factor for the lead and copper ions by the proposed solid-phase extraction was 75. The method was successfully applied to the determination of low levels of copper (II) and lead (II) in tap, Caspian sea, Persian gulf and lake water and also their detection in fish samples. 相似文献
In this study, the parameters of linear isotherm regularity, which called LIR equation state used to compute the surface tension of some dense fluids as benzene, toluene, methanol, ammonia, ethylene, and carbon monoxide. An expression has derived for radial distribution function (RDF) at constant temperature, g (σ), for a real fluid by the use of LIR. This expression, which is related to intermolecular interaction, can be used to describe the temperature–density dependency of RDF at constant temperature, g (σ, ρ, T). In addition, we derive an expression for surface tension of dense fluids (CO, C6H6, C6H5CH3, CH3OH, NH3, and C2H4) using the LIR and g (σ, ρ, T). Unlike previous models, it has shown that, surface tension can obtain without employing ΔH and ΔS. Only P-V-T experimental data have been used to calculate the surface tension. Comparison of the calculated values of surface tension by LIR with the values obtained experimentally show this method is not precise. This problem has led us to try to obtain the expression for surface tension using the extended parameters A, B (A and B are the temperature-dependent parameters which noticeably are depended on attraction and repulsion). The obtained result shows that the accuracy of this method is very high and quite admissible. 相似文献
Double-charged diazabicyclo[2.2.2]octane (DABCO) was immobilized on the inner surface of a nanomaterial composed of the layered double hydroxides (LDHs) of Zn(II) and Cr(III). The resulting material was characterized by SEM, FT-IR and XRD techniques. This novel nanocomposite has been used as a highly porous fiber coating for solid-phase microextraction (SPME) of phenol and various chloro-, nitro- and aminophenols. The LDH nanocomposite was deposited on a stainless steel wire and then evaluated with respect to the extraction of phenolic compounds from water samples. The effects of temperature, extraction time, ionic strength, stirring rate, pH, and desorption temperature and time on the extraction were optimized. The compounds were then separated and quantified by GC-MS. Under optimum conditions, the repeatability for a single fiber (for n = 3 and expressed as the relative standard deviation) is between 2.3 and 7.2 %. The detection limits are between 0.02 and 6.3 pg mL−1. The method is simple, rapid, and inexpensive. The fiber is thermally stable and its use gives high recoveries.
CuO nanostructures with different morphologies and sizes were grown in a controlled manner using a simple low-temperature hydrothermal technique. By controlling the pH of reaction mixture, spherical nanoparticles and cloudlike CuO structures were synthesized at 100-150 °C with excellent efficiency. These CuO nanostructures have been tested for CO gas monitoring by depositing them as thick films on an interdigitated alumina substrate and evaluated the surface resistance of the deposited layer as a function of operating temperature and CO concentrations. The gas sensitivity tests have demonstrated that the CuO nanostructures, especially cloudlike morphology, exhibit high sensitivity to CO proving their applicability in gas sensors. The role of the nanostructure on the sensing properties of CuO is also discussed. 相似文献
A simplified kinetic model for the oxidative coupling of methane over a La0.6Sr0.4Co0.8Fe0.2O3-δ nanocatalyst is presented. The kinetic model was developed by experimental data in a catalytic micro-reactor covering a wide range of reaction conditions (0.04相似文献
We investigate the possibility of Turing-type pattern formation during friction. Turing or reaction-diffusion systems describe variations of spatial concentrations of chemical components with time due to local chemical reactions coupled with diffusion. Turing systems can lead to a variety of complex spatial patterns evolving with time. During friction, the patterns can form at the sliding interface due to the mass transfer (diffusion), heat transfer, various tribochemical reactions, and wear. We present simulation data showing the possibility of such pattern formation. On the other hand, existing experimental data suggest that in situ tribofilms can form at the frictional interface due to a variety of friction-induced chemical reactions (oxidation, the selective transfer of Cu ions, etc.). These tribofilms as well as other frictional "secondary structures" can form various patterns (islands or honeycomb domains). This mechanism of pattern formation can be attributed to the Turing systems. 相似文献