Influence of counter-anion on the coordination geometry of manganese(II) complexes with methyl-2-pyrazinecarboximidate ligand

Two new complexes of [Mn(2-MPyzCI)₂Cl₂].H²O (1) and [Mn(2-MPyzCI)₂(H₂O)₂](NO₃)₂ (2) were synthesized from the reaction of MnX₂.4H₂O (X=Cl^? and NO₃^?) with 2-cyanopyrazine in methanolic solution. The chelating methyl pyrazine-2-carboximidate (2-MPyzCI) ligand is formed via the methanolysis of 2-cyanopyrazine. Although coordination environment around manganes(II) ions is similar, but these complexes are different in geometrical position of 2-MPyzCI ligands. As both compounds are synthesized under the same reaction conditions, the only difference between these two complexes are counter ions and changing of geometrical position of ligands can be considered as a result of influence of the counter-anions on the molecular structures.     

Efficient visible-light-induced photocatalytic degradation of MO on the Cr-nanocrystalline titania-S

In order to improve visible light photocatalytic activities of the nanometer TiO₂, a novel and efficient Cr,S-codoped TiO₂ (Cr-TiO₂-S) photocatalyst was prepared by precipitation-doping method. The crystalline structure, morphology, particle size, and chemical structure of Cr-TiO₂-S were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier transform infrared (FT-IR) techniques, respectively. Results indicate that the doping of Cr and S, cause absorption edge shifts to the visible light region (λ > 420 nm) compare to the pure TiO₂, reduces average size of the TiO₂ crystallites, enhances desired lattice distortion of Ti, promotes separation of photo-induced electron and hole pair, and thus improves pollutant decomposition under visible light irradiation. The photocatalytic activities of Cr-TiO₂-S nanoparticles were evaluated using the photodegradation of methyl orange (MO) as probe reaction under the irradiation of UV and visible light and it was observed that the Cr-TiO₂-S photocatalyst shows higher visible photocatalytic activity than the pure TiO₂. The optimal Cr-TiO₂-S concentration to obtain the highest photocatalytic activity was 5 mol% for both of Cr and S.     

Preparation of chitosan functionalized end‐capped Ag‐NPs and composited with Fe3O4‐NPs: Controlled release to pH‐responsive delivery of progesterone and antibacterial activity against pseudomonas aeruginosa (PAO‐1)

In this work, functionalized chitosan end‐capped Ag nanoparticles (NPs) and composited with Fe₃O₄‐NPs was prepared as pH‐responsive controlled release carrier for gastric‐specific drug delivery. The structure of prepared material was characterized by FE‐SEM, XRD, EDS and FT‐IR analysis. The loading behavior of the progesterone onto this novel material was studied in aqueous medium at 25°C and their release was followed spectrophotometrically at 37°C in seven different buffer solutions (pH 1.2, 2.2, 3.2, 4.2, 5.2, 6.2 and 7.2) to simulate intestine and gastric media which experimental results reveal more release rate in pH 1.2 (gastric medium) with respect to other buffers. This observation is attributed to dependency of the CS‐IMBDO‐Ag‐Fe₃O₄‐NPs and progesterone structure with buffer pH that candidate this new material as prospective pH‐sensitive carrier for gastric‐targeted drug delivery. On the other hand, the antibacterial properties of this material against gram‐negative bacterium pseudomonas aeruginosa (PAO‐1) in agar plates was studied and accordingly based on broth micro dilution the minimum bactericidal concentration (MBC) and minimum inhibitory concentration (MIC) with respect to standard CLSI in different concentrations of CS‐IMBDO‐Ag‐Fe₃O₄‐NPs was calculated. The results reveal that MIC and MBC values are 50 and 1250 μg/mL, respectively. In addition, extracts of Portulaca oleracea leaves was prepared and its antibacterial activity in single and binary system with CS‐IMBDO‐Ag‐Fe₃O₄‐NPs as synergies effect against PAO‐1 was tested and results shown that these materials have significant synergistic effect for each other.     

Torsional vibration of functionally graded nano-rod under magnetic field supported by a generalized torsional foundation based on nonlocal elasticity theory

Abstract

This article contains the nonlocal elasticity theory to capture size effects in functionally graded (FG) nano-rod under magnetic field supported by a torsional foundation. Torque effect of an axial magnetic field on an FG nano-rod has been defined using Maxwell’s relation. The material properties were assumed to vary according to the power law in radial direction. The Navier equation and boundary conditions of the size-dependent FG nano-rod were derived by the Hamilton’s principle. These equations were solved by employing the generalized differential quadrature method (GDQM). Presented model has the ability to turn into the classical model if the material length scale parameter is taken to be zero. The effects of some parameters, such as inhomogeneity constant, magnetic field and small-scale parameter, were studied. As an important result of this study can be stated that an FG nano-rod model based on the nonlocal elasticity theory behaves softer and has smaller natural frequency.     

Effective Mass of Radion via GW Mechanism with a Non-Minimally Coupled Bulk Scalar Field

In the Randall-Sundrum braneworld scenario via the Goldberger-Wise mechanism, the effective mass of 4D radion, where the bulk scalar field is coupled to 5D gravity, has been investigated in two different case of the self-coupling constants, infinite and finite cases. It is shown that in the finite case, the modulus parameter should be greater than the finite coupling constants.     

Preparation and characterization of Cu (II) supported on poly(8‐hydroxyquinoline‐p‐styrene sulphonate) and its application as catalyst for the synthesis of hexahydroquinolines

Cu ( II ) supported on poly(8‐hydroxyquinoline‐p‐styrenesulfonate) (Cu ( II )@PHQSS) was prepared and fully characterized by the different techniques including fourier transform infrared spectroscopy (FT‐IR), ¹H NMR, ¹³C NMR, thermal gravimetric analysis (TGA), differential thermal gravimetric (DTG), differential thermal analysis (DTA), scanning electron microscope (SEM) and energy dispersive X‐ray analysis (EDS). Afterward, the Cu ( II )@PHQSS as nanostructured catalyst was used as catalyst for the synthesis of hexahydroquinolines.     

Detection of Dexamethasone Sodium Phosphate in Blood Plasma: Application of Hematite in Electrochemical Sensors

We studied sensor application of a graphene oxide and hematite (α‐Fe₂O₃/GO) composite electrode well‐characterized by the SEM and XRD. Through differential pulse voltammetry (DPV), oxidation of dexamethasone sodium phosphate (DSP) was studied at the surface of a glassy carbon electrode (GCE) modified with graphene oxide nanosheets (GO) and the α‐Fe₂O₃/GO composite. The values of the transfer coefficient (α) and the diffusion coefficient (D) of DSP were 0.5961 and 4.71×10^?5 cm² s^?1 respectively. In the linear range of 0.1–50 μM, the detection limit (DL) was 0.076 μM. In the second step, a GCE was modified with α‐Fe₂O₃/GO composite and the DSP measurement step was repeated to analyzed and compare the effects of hematite nanoparticles present on graphene oxide surfaces. According to the results, α and D were 0.52 and 2.406×10^?4 cm² s^?1 respectively and the DL was 0.046 μM in the linear range of 0.1–10.0 μM. The sensor is simple, inexpensive and uses blood serum.     

Fluidized-bed Fenton-like oxidation of a textile dye using natural magnetite

Degradation of Acid Orange 7 (AO7) as a model azo dye was investigated in a recirculating pilot fluidized-bed reactor by a Fenton-like process using natural magnetite (NM) and potassium persulfate (K₂S₂O₈). Scanning electron microscopy was performed to characterize the magnetite sample. The heterogeneous Fenton-like process (NM/\({\text{S}}_{2} {\text{O}}_{8}^{2 - }\)) is a modified method owing to its enhanced mass transfer. It can be operated reliably and simply by reducing the produced iron oxide sludge in the conventional Fenton process. Degradation efficiency (DE %) of AO7 by NM/ \({\text{S}}_{2} {\text{O}}_{8}^{2 - }\) process was affected by operational parameters. The DE % of 75 % was obtained for the AO7 treatment (15 mg/L) at the desired conditions, such as pH 5, 0.2 mM \({\text{S}}_{2} {\text{O}}_{8}^{2 - }\), and 0.5 g/L NM after 120 min of reaction time. The dye degradation rate in all the experiments followed the pseudo-second-order kinetic with high correlation coefficients (R ² ≥ 0.98). The low released iron concentration, successive reusability at milder pH and the recirculation mode with the proper mixing are the significant advantages of the NM/\({\text{S}}_{2} {\text{O}}_{8}^{2 - }\) process.     

Biomimetic Bottlebrush Polymer Coatings for Fabrication of Ultralow Fouling Surfaces

Demand for long‐lasting antifouling surfaces has steered the development of accessible, novel, biocompatible and environmentally friendly materials. Inspired by lubricin (LUB), a component of mammalian synovial fluid with excellent antifouling properties, three block polymers offering stability, efficacy, and ease of use were designed. The bottlebrush‐structured polymers adsorbed strongly on silica surfaces in less than 10 minutes by a simple drop casting or online exposure method and were extremely stable in high‐salinity solutions and across a wide pH range. Antifouling properties against proteins and bacteria were evaluated with different techniques and ultralow fouling properties demonstrated. With serum albumin and lysozyme adsorption <0.2 ng cm^?2, the polymers were 50 and 25 times more effective than LUB and known ultralow fouling coatings. The antifouling properties were also tested under MPa compression pressures by direct force measurements using surface forces apparatus. The findings suggest that these polymers are among the most robust and efficient antifouling agents currently known.     

Copper-catalyzed domino reaction between terminal alkynes,isocyanates, and oxiranes: An atom-economic route to morpholine derivatives

In situ generated copper acetylides react with isocyanates and oxiranes to form a decent range of morpholine derivatives. The reactions proceeded with acceptable yields and excellent regioselectivity. The presence of oxygen and moisture completely inhibited the reaction. The scope of the reaction is wide and the reactions involve consecutive C–C, C–N, and C–O bond formations.