HgCdTe薄膜的输运特性及其应力调控

窄禁带直接带隙半导体材料碲镉汞(Hg1–xCdxTe)是一种在红外探测与自旋轨道耦合效应基础研究方面都具有重要应用意义的材料.本文对单晶生长的体材料Hg0.851Cd0.149Te进行阳极氧化以形成表面反型层,将样品粘贴在压电陶瓷上减薄后进行磁输运测试,在压电陶瓷未加电压时观察到了明显的SdH振荡效应.对填充因子与磁场倒数进行线性拟合,获得样品反型层二维电子气的载流子浓度为ns=1.25×10^16m^-2.在不同磁场下,利用压电陶瓷对样品进行应力调控,观测到具有不同特征的现象,分析应是样品中存在二维电子气与体材料两个导电通道.零磁场下体材料主导的电阻的变化应来源于应力导致的带隙的改变;而高场下产生类振荡现象的原因应为应力导致的二维电子气能级的分裂.     

Design of a tuned vibration absorber for a slender hollow cylindrical structure

Abstract

In this paper, details of the design work for a tuned vibration absorber to be used on a hollow cylindrical structure is presented. The vibration problem is of resonant type and the tuned vibration absorber is designed to suppress the displacement vibration response of the free end of the slender hollow structure dominated by the contribution of its lowest transverse vibration modes. The structure is modeled using a commercial finite element software. Finite element model of the structure is verified using experimentally obtained frequency response functions and modal parameters. Effective parameters of the tuned vibration absorber design are then determined based on finite element analysis simulations of the vibration suppression performance of the tuned vibration absorber as it is used on the structure. Details of the tuned vibration absorber design are determined and a prototype is fabricated. Prototype tuned vibration absorber is then characterized experimentally both as a standalone system and also as it is used on the main structure. Vibration reduction performance of the physical prototype of the tuned vibration absorber is also compared with its vibration reduction performance estimated from finite element analysis simulations so that the analysis based design process can be validated.

Communicated by Dumitru Caruntu.     

1H and 13C NMR assignments for two new angular furanocoumarin glycosides from Peucedanum praeruptorum

Two novel angular-type furanocoumarin glycosides, peucedanoside A (1) and peucedanoside B (2), along with a known compound apterin (3), were isolated from the roots of Peucedanum praeruptorum Dunn. Their chemical structures were determined by MS, NMR spectroscopy and chemical analysis. Complete assignments of the 1H and 13C NMR spectroscopic data were achieved by 1D and 2D NMR experiments including DEPT, HSQC, HMBC and ROESY.     

温度对乙醇电催化氧化的影响

升高温度可以提高反应速率和增加物质的输运,因此通过不同温度下反应机理的研究可以深入理解电催化过程,对催化剂的设计具有指导意义。本工作初步建立了变温原位红外测定方法。采用温控电极,用电势测温法进行温度的校准,实验得出控温仪器加热温度Th与电极表面温度TS的关系为T_S=0.57T_h+7.71 (30°C T_h≤50°C);T_S=0.62T_h+5.12 (50°C T_h≤80°C),误差分析最大温差为1°C。利用该方法我们研究了商业Pt/C催化剂在不同温度下乙醇的电氧化过程。从循环伏安图可以明显看到随着温度的升高整体氧化电流增大,起始电位、峰电位均负移,说明热活化使得氧化反应更容易进行;第一个峰电流与第二个峰电流的比值用于定性评估CO_2的选择性,对比25°C,商业Pt/C催化剂在65°C下第一峰提高30%,说明高温有利于C―C键的断裂。对比25°C的原位红外谱图,我们发现35°C及50°C下商业Pt/C催化剂上CO_2产物的起始电位负移200 m V,说明高温下,Pt/C催化剂能在更低的电位提供含氧物种;而CH_3CHO、CH_3COOH起始电位不随温度变化。用CO_2与CH_3COOH的积分面积比来评估CO_2选择性,发现高温低电位其选择性最高,说明高温低电位有利于乙醇完全氧化生成CO_2,而高温高电位下表面吸附含氧物种占据了活性位,阻碍C―C键断裂。     

TiO2修饰La0.6Sr0.4Co0.2Fe0.8O3-δ用于中温固体氧化物燃料电池的阴极

纳米TiO2修饰的La0.6Sr0.4Co0.2Fe0.8O3-δ(LSCF)阴极被直接应用于YSZ电解质电池上. TiO2可阻止LSCF和YSZ间的化学反应,抑制SrZrO3的形成. LSCF-0.25 wt% TiO2阴极电池在0.7 V和600°C下的电流密度是LSCF阴极电池的1.6倍.电化学阻抗谱结果表明, TiO2修饰显著加快了氧离子注入电解质的过程,这可能与TiO2抑制了阴极/电解质界面处高电阻SrZrO3层的形成有关.本文为在ZrO2基电解质上使用高性能的(La,Sr)(Co,Fe)O3阴极材料提供了一种简单有效的方法.     

气相色谱法测定树脂工艺品中的半挥发性有机物残留

建立了树脂工艺品中半挥发性有机物(SVOCs)的超声萃取–气相色谱检测方法。对超声萃取条件进行了研究,优化了气相色谱参数。结果表明,样品用三氯甲烷在60℃下超声萃取40 min,选择HP–5色谱柱时,气相色谱(FID)测定半挥发物总量时可获得良好的灵敏度和准确的定量结果。方法的相对标准偏差小于5%(n=6),检测限为2 mg/kg。4个含量水平样品的6个实验室3次平行测定结果表明,实验室内测定结果的相对标准偏差为1.61%~2.94%,实验室间测定结果的相对标准偏差为5.96%~8.35%。     

在硫酸铵存在下硫氰酸铵-孔雀绿-水液-固体系浮选分离汞（Ⅱ）

研究了在硫酸铵存在下硫氰酸铵－孔雀绿－水液－固体系浮选分离汞（Ⅱ）的行为及其与常见离子分离的条件。实验表明，在一定条件下，控制酸度条件，可实现Hg(Ⅱ）与常见离子Ni（Ⅱ），Mn（Ⅱ），Fe（Ⅱ），Bi（Ⅲ），Co（Ⅱ），Al（Ⅲ），Cr（Ⅲ），Cd（Ⅱ）分离，对合成水样及工业废水进行定量浮选分离测定，结果与双硫腙法相符。     

Sm2Fe17合金的氢化-歧化过程演化

通过X射线衍射(XRD)、扫描电镜(SEM)和能谱分析(EDX)等手段重点研究了Sm2Fe17合金在氢化-歧化过程中的相组成、相的变化以及微观结构的演化规律。研究表明：在0．1MPa的H2气氛下，Sm2Fe17合金首先吸氢；400℃时合金出现部分脱氢现象；在T≥500℃逐渐开始歧化为SmHx和α—Fe，同时生成了大量的微晶或非晶组织；随着温度的升高，合金中的微晶非晶逐渐晶化，750℃时晶化完全，晶粒长大至20～100nm。通过对Sm2Fe17合金的氢化一歧化过程研究，建立了该过程的微观结构变化规律的物理模型。     

PREPARATION AND STUDY ON SILICONE ACRYLATE MICRO-EMULSION OF MULTIPOLYMER

A silicone acr3,1ate micro-emulsion of multipolymer was prepared by seed emulsion polymeri.Tation. The effects of polymerization process, emulsifier rate and amount, initiator rate and amounl, polymerization temperalure, functional monomers, titration time on performances of emulsion have been discussed in detail.     

Surface modification of PDMS by surface-initiated atom transfer radical polymerization of water-soluble dendronized PEG methacrylate

The current paper reports the synthesis of a highly hydrophilic, antifouling dendronized poly(3,4,5-tris(2-(2-(2-hydroxylethoxy)ethoxy)ethoxy)benzyl methacrylate) (PolyPEG) brush using surface initiated atom transfer radical polymerization (SI-ATRP) on PDMS substrates. The PDMS substrates were first oxidized in H₂SO₄/H₂O₂ solution to transform the Si-CH₃ groups on their surfaces into Si-OH groups. Subsequently, a surface initiator for ATRP was immobilized onto the PDMS surface, and PolyPEG was finally grafted onto the PDMS surface via copper-mediated ATRP. Various characterization techniques, including contact angle measurements, attenuated total reflection infrared spectroscopy, and X-ray photoelectron spectroscopy, were used to ascertain the successful grafting of the PolyPEG brush onto the PDMS surface. Furthermore, the wettability and stability of the PDMS-PolyPEG surface were examined by contact angle measurements. Anti-adhesion properties were investigated via protein adsorption, as well as bacterial and cell adhesion studies. The results suggest that the PDMS-PolyPEG surface exhibited durable wettability and stability, as well as significantly anti-adhesion properties, compared with native PDMS surfaces. Additionally, our results present possible uses for the PDMS-PolyPEG surface as adhesion barriers and anti-fouling or functional surfaces in biomedical applications.