Pd‐initiated polymerization of diazo compounds bearing dialkoxyphosphinyl group and hydrolysis of the resulting polymers and oligomers to afford phosphonic acid‐containing products

Pd‐initiated polymerization and oligomerization of diazo compounds containing a dialkoxyphosphinyl group are described. Polymerization of 2‐dialkoxyphosphinylethyl diazoacetates with π‐allylPdCl‐based initiating systems afforded C? C main chain polymers bearing phosphonate on each main chain carbon atom. The quantitative transformation of the side chain phosphonate to phosphonic acid resulted in the formation of water soluble polymers having the acid groups accumulated around their main chains, although the carbonyl ester linkage in the side chain was cleaved via intramolecular acid‐assisted hydrolysis in water at 80 °C. Pd‐initiated oligomerization of diethyl diazomethylphosphonate yielded an oligomeric product bearing diethoxyphosphiny groups directly attached to its main chain carbons, with unexpected incorporation of azo group in the main chain framework. Hydrolysis of the phosphonate of the oligomer afforded a water‐soluble product, which was revealed to show higher proton conductivity than poly(vinylphosphonic acid) under certain conditions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1742–1751     

Combustion behaviors of isolated n-decane and ethanol droplets in carbon dioxide-rich ambience under microgravity

The burning and sooting behaviors of isolated fuel droplets for ethanol and n-decane are examined in high concentration of the ambient carbon dioxide under microgravity. A quartz fiber with the diameter of 50 μm maintains the droplet in the center of the combustion chamber and the range in the initial droplet diameter is from 0.30 to 0.80 mm. The ambience consists of oxygen, nitrogen and carbon dioxide. The concentration of oxygen is 21% in volume, and that of carbon dioxide is varied from 0% to 60% in volume. Detail measurements of the projected image of the droplet are conducted by using a high speed video camera and the effective droplet diameter squared are calculated from the surface area of the rotating body of the projected object. From evolutions of the droplet diameter squared, the instantaneous burning rates are calculated. Time history of the instantaneous burning rate clearly represents the droplet combustion events, such as the initial thermal expansion, ignition and following combustion. The instantaneous burning rate for n-decane shows an increasing trend during combustion, while that for non-sooting ethanol remains almost constant or shows a decreasing trend. A slight stepwise increase in the instantaneous burning rate is observed for larger n-decane droplets in air, which may be attributed to soot accumulation. However, this behavior of the burning rate disappears in higher concentration of carbon dioxide. Direct observation of the droplet flame indicates suppression of soot production in higher concentration of carbon dioxide and the suppression is enhanced for smaller droplet.     

Self Organization and Redox Behavior of Poly(vinylferrocene)-block-Poly(isobutylene)-block-Poly(vinylferrocene) Triblock Copolymer †

Self organization and redox behavior of a ferrocene containing triblock copolymer, poly(vinylferrocene)-block-poly(isobutylene)-block-poly(vinylferrocene), with narrow molecular weight distribution in solutions and in thin films were investigated. Dynamic light scattering studies of the block copolymer in dilute solutions indicated that the polymer chains aggregated at relatively low concentrations. The aggregations of polymer chains were observed in toluene, as well as in tetrahydrofuran at concentrations as low as 0.014 mg/mL and 0.0045 mg/mL, respectively. Thin films of the copolymer showed reversible single electron redox behavior, similar to that of ferrocene. Morphology and micro-phase separation of the copolymer was analyzed by transmission electron microscopy.     

Inducing a high twisted conformation in the polyimide structure by bulky donor moieties for the development of non-volatile memory

Two polyimides, PI(DAT-6FDA) and PI(DAPT-6FDA), from N-(2,4-diaminophenyl)-N,N-diphenylamine (DAT) or N-(4-(2′,4′-diaminophenoxy)phenyl-N,N-diphenylamine (DAPT) and 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) were prepared to clarify the structural effect on the resulting memory properties. The memory device based on PI(DAT-6FDA) showed an unstable volatile behavior, while the device based on PI(DAPT-6FDA) with a more bulky donor (D) unit exhibited a stable non-volatile FLASH type memory characteristic with a long retention time over 10⁴ s. The theoretical simulation based on the density functional theory (DFT) suggested that the greater distinct charge separation between the ground and charge transfer (CT) states led to a highly stable memory behavior. Also, it was clarified that PI(DAPT-6FDA) had a highly twisted conformation compared to PI(DAT-6FDA) in the ground state, and a more twisted dihedral angle between the D and acceptor (A) units was induced in the CT state, which led to the non-volatile memory characteristic.     

Complete Photochromic Structural Changes in Ruthenium(II)?Diimine Complexes,Based on Control of the Excited States by Metalation

The thermal and photochemical reactions of a newly synthesized complex, [Ru^II(TPA)(tpphz)]²⁺ ( 1 ; TPA=tris(2‐pyridylmethyl)amine, tpphz=tetrapyrido[3,2‐a:2′,3′‐c:3′′,2′′‐h: 2′′′,3′′′‐j]phenazine), and its derivatives have been investigated. Heating a solution of complex 1 (closed form) and its derivatives in MeCN caused the partial dissociation of one pyridylmethyl moiety of the TPA ligand and the resulting vacant site on the Ru^II center was occupied by a molecule of MeCN from the solvent to give a dissociated complex, [Ru^II(η³‐TPA)(tpphz)(MeCN)]²⁺ ( 1′ , open form), and its derivatives, respectively, in quantitative yields. The thermal dissociation reactions were investigated on the basis of kinetics analysis, which indicated that the reactions proceeded through a seven‐coordinate transition state. Although the backwards reaction was induced by photoirradiation of the MLCT absorption bands, the photoreaction of complex 1′ reached a photostationary state between complexes 1 and 1′ and, hence, the recovery of complex 1 from complex 1′ was 67 %. Upon protonation of complex 1 at the vacant site of the tpphz ligand, the efficiency of the photoinduced recovery of complex 1 +H⁺ from complex 1′ +H⁺ improved to 83 %. In contrast, dinuclear μ‐tpphz complexes 2 and 3 , which contained the Ru^II(TPA)(tpphz) unit and either a Ru^II(bpy)₂ or Pd^IICl₂ moiety on the other coordination edge of the tpphz ligand, exhibited 100 % photoconversion from their open forms into their closed forms ( 2′ → 2 and 3′ → 3 ). These results are the first examples of the complete photochromic structural change of a transition‐metal complex, as represented by complete interconversion between its open and closed forms. Scrutinization by performing optical and electrochemical measurements allowed us to propose a rationale for how metal coordination at the vacant site of the tpphz ligand improves the efficiency of photoconversion from the open form into the closed form. It is essential to lower the energy level of the triplet metal‐to‐ligand charge‐transfer excited state (³MLCT*) of the closed form relative to that of the triplet metal‐centered excited state (³MC*) by metal coordination. This energy‐level manipulation hinders the transition from the ³MLCT* state into the ³MC* state in the closed form to block the partial photodissociation of the TPA ligand.     

A Dual Functional-Group Derivatization Liquid Chromatography–Tandem Mass Spectrometry Method: Application for Quantification of Human Insulin

Chromatographia - Recently, we developed a sensitive and accurate quantification method for short-chain peptides using dual functional-group derivatization. Sensitive and accurate quantification...     

Cellulose-synthesizing machinery in bacteria

Cellulose - Cellulose is produced by all plants and a number of other organisms, including bacteria. The most representative cellulose-producing bacterial species is Gluconacetobacter xylinus, an...     

One‐Pot Synthesis of 2,5‐Dihydropyrroles from Terminal Alkynes,Azides, and Propargylic Alcohols by Relay Actions of Copper,Rhodium, and Gold

Relay actions of copper, rhodium, and gold formulate a one‐pot multistep pathway, which directly gives 2,5‐dihydropyrroles starting from terminal alkynes, sulfonyl azides, and propargylic alcohols. Initially, copper‐catalyzed 1,3‐dipolar cycloaddition of terminal alkynes with sulfonyl azides affords 1‐sulfonyl‐1,2,3‐triazoles, which then react with propargylic alcohols under the catalysis of rhodium. The resulting alkenyl propargyl ethers subsequently undergo the thermal Claisen rearrangement to give α‐allenyl‐α‐amino ketones. Finally, a gold catalyst prompts 5‐endo cyclization to produce 2,5‐dihydropyrroles.     

Total Chemical Synthesis of Biologically Active Fluorescent Dye‐Labeled Ts1 Toxin

Ts1 toxin is a protein found in the venom of the Brazilian scorpion Tityus serrulatus. Ts1 binds to the domain II voltage sensor in the voltage‐gated sodium channel Nav and modifies its voltage dependence. In the work reported here, we established an efficient total chemical synthesis of the Ts1 protein using modern chemical ligation methods and demonstrated that it was fully active in modifying the voltage dependence of the rat skeletal muscle voltage‐gated sodium channel rNav1.4 expressed in oocytes. Total synthesis combined with click chemistry was used to label the Ts1 protein molecule with the fluorescent dyes Alexa‐Fluor 488 and Bodipy. Dye‐labeled Ts1 proteins retained their optical properties and bound to and modified the voltage dependence of the sodium channel Nav. Because of the highly specific binding of Ts1 toxin to Nav, successful chemical synthesis and labeling of Ts1 toxin provides an important tool for biophysical studies, histochemical studies, and opto‐pharmacological studies of the Nav protein.