人工调控微结构压电驻极体的热稳定性和电荷动态特性

利用表面带有周期性结构的硬质模板,通过冷压工艺将周期结构图案复制到多孔聚四氟乙烯(PTFE)薄膜表面,再经过热黏合工艺与致密氟化乙丙烯共聚物(FEP)薄膜复合,制备出了高度有序的微孔结构复合膜,并用电晕充电的方法对复合膜进行极化处理,最终获得氟聚合物复合膜压电驻极体.借助对这类复合膜压电驻极体介电谐振谱的测量,得到了材料的杨氏模量.并利用等温热老化工艺对它们的压电系数d33的热稳定性进行了考察.最后通过短路热刺激放电谱的测量和分析,讨论了该复合膜在热老化处理后的电荷动态 关键词： 有序结构 压电驻极体 压电性 电荷动态特性     

光子晶体光纤拉制中工艺参数的控制

分析了光子晶体光纤拉制中各工艺参数之间的相互影响,建立了工艺参数与最终光纤结构之间的对应关系.在温度和送料速度的协调控制下,通过调节气压参数可有效控制气孔结构.实验拉制出孔径孔距比分别为0.45和0.8的单模以及高占空比光子晶体光纤.在制备非均匀孔径光子晶体光纤时,仅靠调控工艺参数往往难以拉制出理想结构,本文以一种单偏振单模PCF结构为例,对预制棒结构进行了优化设计.计算表明可由此拉制出满足要求的光子晶体光纤. 关键词： 光子晶体光纤 工艺参数 气压控制 气孔结构     

Generalizing minimal supergravity

In Grand Unified Theories (GUTs), the Standard Model (SM) gauge couplings need not be unified at the GUT scale due to the high-dimensional operators. Considering gravity mediated supersymmetry breaking, we study for the first time the generic gauge coupling relations at the GUT scale, and the general gaugino mass relations which are valid from the GUT scale to the electroweak scale at one loop. We define the index k   for these relations, which can be calculated in GUTs and can be determined at the Large Hadron Collider and the future International Linear Collider. Thus, we give a concrete definition of the GUT scale in these theories, and suggest a new way to test general GUTs at future experiments. We also discuss five special scenarios with interesting possibilities. With our generic formulae, we present all the GUT-scale gauge coupling relations and all the gaugino mass relations in the SU(5)$\mathit{SU}(5)$ and SO(10)$\mathit{SO}(10)$ models, and calculate the corresponding indices k. Especially, the index k   is 5/3 in the traditional SU(5)$\mathit{SU}(5)$ and SO(10)$\mathit{SO}(10)$ models that have been studied extensively so far. Furthermore, we discuss the field theory realization of the U(1)$U(1)$ flux effects on the SM gauge kinetic functions in F-theory GUTs, and calculate their indices k as well.     

关于对数平均的上界和下界

利用广义对数平均，给出了对数平均的上界和下界控制     

添加助剂的钙钛矿型氧化物NdMO_3上的甲烷氧化偶联——Ⅱ.15% Li_2O/NdMO_3(M=Cr、Mn、Fe、Co、Ni)上的OCM反应研究

在添加了15%Li_2O的NdMO_3(M=Cr、Mn、Fe、Co、Ni)上进行了甲烷氧化偶联(OCM)反应研究.通过改变反应气中CH_4:O_2浓度比,在氧化态和“脱氧态”催化剂上的CH_4脉冲反应,探讨了表面吸附氧和晶格氧在OCM反应中的作用以及NdMO_3中不同金属离子(M)对OCM反应活性的影响等.     

Cyclic Disulfide Liposomes for Membrane Functionalization and Cellular Delivery

Liposomes are effective therapeutic delivery nanocarriers due to their ability to encapsulate and enhance the pharmacokinetic properties of a wide range of therapeutics. Two primary areas in which improvement is needed for liposomal drug delivery is to enhance the ability to infiltrate cells and to facilitate derivatization of the liposome surface. Herein, we report a liposome platform incorporating a cyclic disulfide lipid (CDL) for the dual purpose of enhancing cell entry and functionalizing the liposome membrane through thiol-disulfide exchange. In order to accomplish this, CDL-1 and CDL-2 , composed of lipoic acid (LA) or asparagusic acid (AA) appended to a lipid scaffold, were designed and synthesized. A fluorescence-based microplate immobilization assay was implemented to show that these compounds enable convenient membrane decoration through reaction with thiol-functionalized small molecules. Additionally, fluorescence microscopy experiments indicated dramatic enhancements in cellular delivery when CDLs were incorporated within liposomes. These results demonstrate that multifunctional CDLs serve as an exciting liposome system for surface decoration and enhanced cellular delivery.     

Synthesis of Highly Uniform Molybdenum–Glycerate Spheres and Their Conversion into Hierarchical MoS2 Hollow Nanospheres for Lithium‐Ion Batteries

Highly uniform Mo–glycerate solid spheres are synthesized for the first time through a solvothermal process. The size of these Mo–glycerate spheres can be easily controlled in the range of 400–1000 nm by varying the water content in the mixed solvent. As a precursor, these Mo–glycerate solid spheres can be converted into hierarchical MoS₂ hollow nanospheres through a subsequent sulfidation reaction. Owing to the unique ultrathin subunits and hollow interior, the as‐prepared MoS₂ hollow nanospheres exhibit appealing performance as the anode material for lithium‐ion batteries. Impressively, these hierarchical structures deliver a high capacity of about 1100 mAh g^?1 at 0.5 A g^?1 with good rate retention and long cycle life.     

An Unlocked Two-Dimensional Conductive Zn-MOF on Polymeric Carbon Nitride for Photocatalytic H2O2 Production

Developing highly efficient catalytic sites for O₂ reduction to H₂O₂, while ensuring the fast injection of energetic electrons into these sites, is crucial for artificial H₂O₂ photosynthesis but remains challenging. Herein, we report a strongly coupled hybrid photocatalyst comprising polymeric carbon nitride (CN) and a two-dimensional conductive Zn-containing metal–organic framework (Zn-MOF) (denoted as CN/Zn-MOF(lc)/400; lc, low crystallinity; 400, annealing temperature in °C), in which the catalytic capability of Zn-MOF(lc) for H₂O₂ production is unlocked by the annealing-induced effects. As revealed by experimental and theoretical calculation results, the Zn sites coordinated to four O (Zn-O₄) in Zn-MOF(lc) are thermally activated to a relatively electron-rich state due to the annealing-induced local structure shrinkage, which favors the formation of a key *OOH intermediate of 2e⁻ O₂ reduction on these sites. Moreover, the annealing treatment facilitates the photoelectron migration from the CN photocatalyst to the Zn-MOF(lc) catalytic unit. As a result, the optimized catalyst exhibits dramatically enhanced H₂O₂ production activity and excellent stability under visible light irradiation.