高活性和高稳定性的核壳结构PtPx@Pt/C催化氧还原

在质子交换膜燃料电池中,金属铂是最高效的阴极氧还原催化剂之一,但是铂昂贵的价格严重阻碍了其在燃料电池领域中的大规模商业化应用.通过铂与3d过渡金属(Fe、Co和Ni)合金化可以有效提高催化剂的氧还原活性,然而在实际的高腐蚀性、高电压和高温的燃料电池运行环境中,铂合金纳米粒子易发生溶解、迁移和团聚,从而导致催化剂耐久性差.同时过渡金属离子的溶出会影响质子交换膜的质子传导,并且一些过渡金属离子会催化芬顿反应,产生高腐蚀性?OH自由基,加快Nafion和催化剂的劣化.与过渡金属掺杂相比,非金属掺杂具有明显优势:一方面,非金属溶出产生的阴离子不会取代Nafion中的质子,也不会催化芬顿反应;另一方面,与3d过渡金属相比,非金属具有更高的电负性,其掺杂很容易调节Pt的电子结构.因此,本文通过非金属磷掺杂合成具有优异稳定性的核壳结构PtPx@Pt/C氧还原催化剂.通过热处理磷化商业碳载铂形成磷化铂(PtP2),经由酸洗处理产生富铂壳层,即PtPx@Pt/C.X射线粉末多晶衍射结果证明了PtP2相的存在,并且进一步通过电子能量损失谱对纳米粒子进行微区面扫描分析以及X射线光电子能谱分析证实了富铂壳层的存在,壳层厚度约1 nm.得益于核壳结构及磷掺杂引起的电子结构效应,PtP1.4@Pt/C催化剂在0.90 V(RHE)时的面积活性(0.62 mA cm–2)与质量活性(0.31 mAμgPt–1)分别是商业Pt/C的2.8倍和2.1倍.更重要的是,在加速耐久性测试中,PtP1.4@Pt/C催化剂在30000圈电位循环后质量活性仅衰减6％,在90000圈电位循环后仅衰减25％;而商业Pt/C催化剂在30000圈电位循环后就衰减46％.PtP1.4@Pt/C催化剂高活性与高稳定性主要归功于核壳结构、磷掺杂引起的电子结构效应以及磷掺杂增加了碳载体对催化剂粒子的锚定作用进而阻止了其迁移团聚.综上所述,本文为设计同时具有优异活性与稳定性非金属掺杂Pt基氧还原催化剂提供新的思路.     

Morphology controllable conjugated network polymers based on AIE-active building block for TNP detection

Luminescent conjugated network polymer is one of the most promising chemo-sensors owing to their good chemical/optical stability and multiple functionalization.Herein,three conjugated network polymers were prepared by using aggregation-induced emission active 1,1,2,2-tetrakis(4-formyl-(1,1'-biphenyl))-ethane(TFBE) unit as monomer and hydrazine as linker.Through regulating the synthetical condition,the polyme ric network can form either unifo rm two-dimensional azine-linked nanosheets(ANS),conjugated microporous polymers(A-CMP) or covalent organic frameworks(A-COF).All of these polymers exhibited good stability and high fluorescence quantum efficiency with the quantum yield of6.31% for A-NS,5.26% for A-CMP,and 5.80% for A-COF,as well as fast and selective fluorescence quenching response to 2,4,6-trinitrophenol(TNP).And the best TNP sensing performance with the Stern-Volmer constants(K_(sv)) values up to 8 × 10~5 L/mol and a detection limit of 0.09 μmol/L was obtained for A-NS.The study explores various strategies to construct conjugated polymers with different nanoarchitectures based on the same building block for sensitive detection of explosives.     

Booting the electrochemical properties of Fe-based anode by the formation multiphasic nanocomposite for lithium-ion batteries

Fe-based compounds with good environmental friendliness and high reversible capacity have attracted considerable attention as anode for lithium-ion batteries.But,similar to other transition metal oxides(TMOs),it is also affected by large volume changes and inferior kinetics during redox reactions,resulting in the destruction of the crystal structure and poor electrochemical performance.Here,Fe_3O_4/C nanospheres anchored on the two-dimensional graphene oxide as precursors are phosphated and sintered to build the multiphasic nanocomposite.XRD results confirmed the multiphasic nanocomposite composed of Fe_2O_3,Fe_3O_4 and Fe_3PO_7,which will facilitate the Li~+ diffusion.And the carbonaceous matrix will buffer the volume changes and enhance electron conduction.Consequently,the multiphasic Febased anode delivers a large specific capacity of 1086 mAh/g with a high initial Coulombic efficiency of 87% at 0.1 C.It also has excellent cycling stability and rate property,maintaining a capacity retention of～87% after 300 cycles and a high reversible capacity of 632 mAh/g at 10 C.The proposed multiphasic structure offers a new insight into improving the electrochemical properties of TMO-based anodes for advanced alkali-ion batteries.     

Enhanced conversion of α-cellulose to 5-HMF in aqueous biphasic system catalyzed by FeCl_3-CuCl_2

This study was to investigate the optimal additions of the cellulose decomposition reaction to obtain the most yield of 5-HMF and other furan derivatives in various biphasic systems with FeCl_3-CuCl_2 mixed catalysts,and explore its depolymerization kinetics.A series of controllable reactions have been performed under mild environmentally friendly atmosphere.The experiment results showed that49.13 wt% of 5-HMF was the maximum production along with 2.98 wt% other furan derivatives catalyzed by mixed Lewis acid FeCl_3-CuCl_2 under the two phases which included high concentration NaCl aqueous phase and n-butanol organic phase at 190℃ for 45 min.The conclusion suggested that two-phase systems benefited the yield of 5-HMF,furan derivatives via extracting the target products from reaction phase to organic phase to avoid rehydration of 5-HMF.The kinetic calculation revealed the conversion with mixed catalysts had lower reaction apparent activation energy(21.65 kJ/mol,190-230℃) and the reaction rate was faster than that with acid-based catalysts.Based on experiment exploration,the probable mechanism of cellulose decomposition with FeCl_3-CuCl_2 was proposed.     

苯乙炔配位聚合及光热性能研究——推荐一个绿色高分子化学综合实验

介绍一个绿色高分子化学综合实验.在水相中,苯乙炔通过有机铑配合物催化聚合得到聚苯乙炔,利用红外光谱仪、核磁共振仪、紫外-可见分光光度计、荧光光谱仪和热重分析仪对其结构和光热性能进行研究.本实验难度适中,可以通过溶剂为可变因素展开分析讨论,引导学生主动思考.实验内容涵盖高分子化学、应用波谱学和聚合物仪器分析与表征等知识点.本实验的实施不仅可提升学生的综合运用专业知识能力,还可培养学生系统的科研思维和环保意识.     

负载型廉价金属催化剂在低温催化氧化甲醛中的应用

甲醛是室内常见的挥发性有机污染物之一,长期接触会严重危害人体健康.负载型廉价金属催化剂在甲醛去除和实际应用方面表现出优异性能,引起研究人员的广泛关注.本文阐述了低温条件下负载型廉价金属催化剂在甲醛热催化氧化、光催化氧化和等离子协同催化氧化方面的研究进展,介绍了甲醛低温催化的影响因素,并讨论了反应机理.反应条件、载体类型...     

铬-对苯二甲酸MOF的框架异构：MIL-88B(Cr)和MIL-101(Cr)

可以通过简单地控制乙酸浓度的方法,在相似的水热合成条件下合成2种同一家族的金属有机框架材料(MOFs):MIL-88B(Cr)和MIL-101(Cr)。在相对较低的乙酸浓度下,可以得到平均粒径为100 nm的MIL-101(Cr),并拥有很高的BET比表面积(3543 m^2·g^-1)。而在相对较高的乙酸浓度下,则可得到另一种具有“呼吸”特性结构的MOF——MIL-88B(Cr)。利用粉末X射线衍射、扫描电镜、N2吸附-脱附分析、热重分析等对它们的结构、形貌、孔隙率等性质做了详细的分析。     

溶液法生长大面积超薄钙钛矿单晶薄膜

卤化物钙钛矿由于其独特的光电性质,在薄膜光电子器件领域具有极大潜力1。虽然许多工作都集中在多晶钙钛矿材料上,但单晶钙钛矿比多晶具有更低的缺陷态密度、更好的载流子输运能力和更高的稳定性2,3,可以有有效减少甚至消除载流子输运过程中的散射损失以及在晶界处的非辐射性复合4。采用单晶钙钛矿薄膜作为器件活性层被认为是进一步提高钙钛矿光电子器件性能的理想方案。目前,研究报道的钙钛矿单晶薄膜生长方法主要通过化学气相沉积和溶液空间限制法5,6,然而,所制备的薄膜厚度往往较厚,相应的器件性能也没有多晶薄膜的器件高7,因此,生长高质量的超薄大面积钙钛矿单晶薄膜至关重要。     

吲哚多样化环化合成咔唑衍生物研究进展

咔唑是一类特殊的含氮芳杂环分子,咔唑衍生物理化性质独特、结构多样,在天然产物、药物和功能材料领域有着广阔的应用,其合成方法一直备受关注.从吲哚直接环化到咔唑的合成方法简洁高效,原料廉价易得、产物种类多样.总结了近5年来以2,3-未取代吲哚为原料合成咔唑衍生物的方法,典型环化策略包含以下三种:[2+2'+2']环化反应、...     

新型嘧啶单环类非经典叶酸拮抗剂的合成及抗肿瘤活性研究

以课题组前期设计合成的非经典叶酸拮抗剂6-(4'-甲基苯乙基)-N5-氯乙酰基-2,4-二氨基哌啶并[3,2-d]嘧啶(wm-8.2)为先导化合物,将wm-8.2中的哌啶并嘧啶双环结构简化为嘧啶单环结构,以提高分子柔韧性并简化分子结构,根据6-位空间占位设计6-H和6-甲基两个系列,考察了不同桥链长度和不同芳香杂环侧链...