Enzymatically synthesized polyaniline film deposition studied by simultaneous open circuit potential and electrochemical quartz crystal microbalance measurements

The chemical and enzymatic deposition of polyaniline (PANI) films by in situ polymerization was studied and the resulting films were characterized. The film formation and polymerization processes were simultaneously monitored by the evolution of the open circuit potential and quartz-crystal microbalance measurements. Different substrates, such as Indium-Tin oxide electrodes and gold-coated quartz-crystal electrodes were used as substrates for PANI deposition. Electroactive PANI films were successfully deposited by in situ enzymatic polymerization at low oxidation potential. The electrogravimetric response of the enzymatically deposited PANI film was studied by cyclic voltammetry in monomer-free acidic medium. The morphology of the films was observed by scanning electron microscopy, revealing a granular structure in enzymatically deposited PANI. The PANI films were also characterized by thermogravimetric analysis, electrochemical impedance spectroscopy, and X-ray photoelectron and Fourier-transformed infrared spectroscopy. The simultaneous use of quartz crystal microbalance and open circuit potential is presented as a very useful technique to monitor enzymatic reactions involving oxidoreductases.     

An octanuclear molybdenum(VI) complex containing coordinatively bound 4,4'-di-tert-butyl-2,2'-bipyridine, [Mo8O22(OH)4(di-tBu-bipy)4]: synthesis, structure, and catalytic epoxidation of bio-derived olefins

The reaction of [MoO(2)Cl(2)(di-tBu-bipy)] (1) (di-tBu-bipy = 4,4'-di-tert-butyl-2,2'-bipyridine) with water at 100-120 °C in a Teflon-lined stainless steel autoclave, in an open reflux system, or in a microwave synthesis system gave the octanuclear complex [Mo(8)O(22)(OH)(4)(di-tBu-bipy)(4)] (2) as a microcrystalline powder in good yields. Single crystals of 2 suitable for X-ray diffraction were obtained by the reaction of MoO(3) and di-tBu-bipy in water at 160 °C for 3 days. The molecular structure of 2 comprises a purely inorganic core, Mo(4)O(8)(μ(3)-OH)(2)(μ(2)-O)(2), attached to two peripheral oxo-bridged binuclear units, Mo(2)O(4)(μ(2)-O)(2)(OH)(di-tBu-bipy)(2). The inorganic core is composed of a unique assembly of four {MoO(5)} distorted square pyramids connected to each other via edge-sharing. Overall, the octanuclear complex adopts a highly distorted form strongly resembling an "S"-shaped molecular unit. Complex 2 was applied in the catalytic epoxidation of the biorenewable olefins DL-limonene (Lim) and methyl oleate (Ole), using tert-butylhydroperoxide (TBHP) as an oxygen donor, under mild reaction conditions (55 °C, air). The reactions of Lim and Ole gave the respective epoxide monomers in fairly high selectivities at high conversions (89% 1,2-epoxy-p-menth-8-ene selectivity at 96% Lim conversion; 99% methyl 9,10-epoxystearate selectivity at 94% Ole conversion, reached within 24 h reaction). Iodometric titrations revealed no measurable "non-productive" decomposition of TBHP.     

TG and DSC analyses of eucalyptus black liquor as alternative methods to estimate solids content

As a consequence of the continuous increase in the production rate of pulp and paper mills around the world, a great quantity of black liquor, a by-product of the wood digestion process, is produced. This by-product has a great potential as biomass, but needs to be concentrated to higher solids content to be burned as fuel in a recovery boiler. This is necessary to make the pulping process economically feasible, incinerating black liquor to produce high pressure steam, recycling inorganic chemicals to the process. The greater the solids content in black liquor, the better the combustion process in the boiler. Nevertheless, concentration of solids in black liquor above 75 mass/%, causes scaling formation on the heat transfer surfaces of evaporators and concentrators, due to the precipitation of sodium salts, reducing the overall efficiency of this equipment. The aim of this work is to evaluate the use of thermal analyses techniques, TG and DSC, as alternative methods to estimate solids content in eucalyptus black liquor samples since this information is essential to understand scaling formation process, allowing actions to reduce this industrial problem. Traditional techniques applied to determine solids content use gravimetric methods, which are simple, fine, but take a lot of time to be executed. Thermal analyses have proved to be very accurate and have the advantage to be faster than the traditional techniques. On the other hand, the cost-benefit relationship of the traditional technique is much greater and the final decision which one should be used depends on the conditions available.     

N‐phosphorylated 3,5‐bis(arylidene)4‐piperidones: Synthesis,X‐ray structure,and evaluation of antitumor activity

In a search for cytotoxic fluorescent materials, a series of N‐phosphorylated compounds 2a–c were prepared by phosphorylation of 3,5‐bis(4‐N,N‐dimethylbenzylidene)‐4‐piperidone 1 . According to X‐ray investigations, molecule 2a is E,E‐isomer with axial position of the P(O)(OCH₂CF₃)₂ substituent. Fluorescence of compounds 2a–c was found to be similar to fluorescence of nonphosphorylated compound 1 . The cytotoxicity of the compounds 2a–c was estimated on several human tumor cell lines (H9, K562, and MCF7). © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:497–502, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20147     

Calorimetric study of poly(2-ethylhexyl acrylate) over the range from T → 0 to 350 K

For the first time, the heat capacity $ C_{\text{p}}^{^\circ } $ of poly(2-ethylhexyl acrylate) has been studied in an adiabatic vacuum calorimeter between 7 and 350 K, the standard thermodynamic functions: heat capacity $ C_{\text{p}}^{^\circ } $ (T), enthalpy H°(T) ? H°(0), entropy S°(T) ? S°(0), Gibbs function G°(T) ? H°(0) have been calculated from T → 0 to 350 K. The energy of combustion Δ_c U of the compound under study has been measured in a calorimeter with a stationary bomb and an isothermal shell. The standard enthalpy of combustion Δ_c H° and thermodynamic parameters of formation—enthalpy Δ_f H°, entropy Δ_f S°, Gibbs function Δ_f G°—at T = 298.15 K have been calculated. The results have been used to calculate the thermodynamic characteristics of 2-ethylhexyl acrylate bulk polymerization into poly(2-ethylhexyl acrylate) over the range from T → 0 to 350 K.     

New interpretation of heat effects in polymorphic transitions

Overlapping endothermic and exothermic effects in DSC measurements of polymorphic transitions is often detected in molecular crystals and drugs. It is explained by the sequence of melting and crystallization. In this paper, we argue that this explanation is incorrect. In revealing the kinetic nature of the endo/exo thermal effect, we suggest another explanation, based on the nucleation. New interpretation does allow us to measure the energetic barrier in the nucleation of bulk sample, thus providing a tool for testing the nucleation models.     

Specificity of Glucose Oxidase from Penicillium funiculosum 46.1 Towards Some Redox Mediators

Glucose oxidase (GOx) from Penicillium funiculosum 46.1 was purified using step-by-step ultrafiltration and it was characterized by spectrophotometric and spectrofluorometric methods. It was shown that spectra of GOx produced by P. funiculosum are typical for flavoproteins. Absorption spectrum has distinct peaks at 380 and 457 nm, excitation spectrum at 373 and 447 nm, and emission spectrum at 530 and 562 nm. The pH correlation of enzyme activity and catalytic characteristics in various buffer systems (phosphate (pH 5.0–9.0), citrate (pH 3.0–5.0), citrate-phosphate (pH 3.0–9.0), and universal (pH 3.0–9.0)) were registered. It was determined that the GOx is the most efficiently interacting with substrate (glucose) in phosphate buffer at pH 7.0 with k _cat/K _m?=?21,825 M^?1 s^?1. Interaction of several different redox mediators (9,10-phenantroline-5,6-dione, 9,10-phenanthrenequinone, N-methylphenazonium methyl sulfate, ferrocene, ferrocenecarboxylic acid, α-methylferrocenemethanol, ferrocenecarboxaldehyde) with GOx from P. funiculosum was investigated by evaluation of the difference in fluorescence emission intensity of FAD_(oxidized) and FADH_2(reduced) forms. It was found that 9,10-phenantroline-5,6-dione and 9,10-phenanthrenequinone are the best redox mediators for this type of GOx.