铝的动态屈服强度测量及再加载弹性前驱波的形成机理分析

利用激光干涉测速技术(VISAR)测量LY12铝合金在20—34 GPa冲击压力下经历加载-卸载和加载-再加载过程的样品/窗口界面粒子速度剖面，采用AC方法确定了具有较高精度的动态屈服强度值.实验结果和文献发表的数据具有较好的一致性.通过以平面焊接方式制作组合飞片，克服了组合飞片在气炮发射过程中可能发生分离的技术困难，使铝的动态屈服强度测量压力范围从22 GPa扩展到了34 GPa.同时，根据对不同实验条件下的加载-再加载过程的比较，对再加载弹性前驱波的形成机理进行了讨论，认为位错是形成该现象的主要原因.     

相位修正的耦合模理论用于计算光纤Bragg光栅法布里-珀罗腔透射谱

基于光纤Bragg光栅(FBG)反射复振幅相移对FBG法布里-珀罗腔透射谱的影响,分析了传统耦合模理论计算均匀FBG反射复振幅相移产生误差的原因.引入折射率分布初始相位参数描述FBG折射率分布纵向的微小偏移,用真实的反透射系数代替简明形式的反透射系数,对传统耦合模理论进行了修正,增加了与折射率分布初始相位参数有关而与波长无关的相位因子.在此基础上进一步对计算非均匀FBG的传输矩阵法的相位进行了修正.修正后的快速计算结果用于FBG法布里-珀罗腔透射谱的计算,可反映折射率分布初始相位参数对透射峰波长位置的影响,与Rouard 算法及实验值均有较好的一致性. 关键词： 光纤Bragg 光栅 法布里-珀罗腔 耦合模理论     

Entanglement and Density Matrix of a Block of Spins in AKLT Model

We study a 1-dimensional AKLT spin chain, consisting of spins S in the bulk and S/2 at both ends. The unique ground state of this AKLT model is described by the Valence-Bond-Solid (VBS) state. We investigate the density matrix of a contiguous block of bulk spins in this ground state. It is shown that the density matrix is a projector onto a subspace of dimension . This subspace is described by non-zero eigenvalues and corresponding eigenvectors of the density matrix. We prove that for large block the von Neumann entropy coincides with Renyi entropy and is equal to . NSF Grant DMS-0503712.     

Strong decay Δ<Superscript>++</Superscript>→<Emphasis Type="Italic">p</Emphasis><Emphasis Type="Italic">π</Emphasis> with light-cone QCD sum rules

We calculate the strong coupling constant g _{ΔN π} and study the strong decay Δ⁺⁺→p π with light-cone QCD sum rules. The numerical value of the strong coupling constant g _{ΔN π} is consistent with the experimental data. The small discrepancy may be due to the failure to take into account perturbative corrections.     

Morphological study of atherosclerotic plaque and its application in vulnerability evaluation

The relationships between the morphological characteristics and the vulnerability of atherosclerotic plaque were analyzed theoretically and several suggestions were proposed to evaluate the plaque vulnerability. Validated by animal experiments and clinical studies, the theoretical results were confirmed. Supported by the National Natural Science Foundation of China (Grant Nos. 10302016 and 60402023), the National Basic Research Program of China (973 Program)(Grant No. 2006CB503803), and the National Hi-Tech Research and Development Program of China (863 Program) (Grant No. 2007AA02Z448)     

Controlled synthesis of CeO<Subscript>2</Subscript> nanoparticles using novel amphiphilic cerium complex precursors

Maleic anhydride was grafted by long-chain alcohols (1-hexadecanol, 1-octadecanol) to amphiphilic mono-L cis-butene dicarboxylates (L = hexadecyl, octadecyl), i.e., MAH, MAO, respectively. Subsequently, corresponding amphiphilic cerium complexes with these two mono-L cis-butene dicarboxylate ligands (Ce(L')₃, L'= MAH, MAO) were synthesized and behaved as the precursors to prepare CeO₂ nanoparticles for both of which can form nanosized micelle-like aggregates by special self-assembly in the wet chemical process. The nanoparticles were further characterized by Fourier transform-infrared spectroscopy (FTIR), Diffuse reflectance ultraviolet-visible spectra (DRUVS), scanning electron microscope (SEM), transmission electron microscope (TEM), and x-ray diffraction (XRD). Both the CeO₂ nanoparticles are in a cubic fluorite structure and present regular and well-dispersion club-like morphology with average particle size in the range of 40–70 nm. Besides, the strong ultraviolet–visible absorption for these CeO₂ nanoparticles can be found at the long-wavelength ultraviolet to visible region of 200–500 nm.     

Effect of chitosan and thiolated chitosan coating on the inhibition behaviour of PIBCA nanoparticles against intestinal metallopeptidases

Surface modified nanoparticles composed of poly(isobutylcyanoacrylate) (PIBCA) cores surrounded by a chitosan and thiolated chitosan gel layer were prepared and characterized in previous works. The presence of such biopolymers on the nanoparticle surface conferred those nanosystems interesting characteristics that might partially overcome the gastrointestinal enzymatic barrier, improving the oral administration of pharmacologically active peptides. In the present work, the antiprotease behaviour of this family of core–shell nanoparticles was in vitro tested against two model metallopeptidases present in the gastrointestinal tract (GIT): Carboxypeptidase A -CP A- (luminal protease) and Leucine Aminopeptidase M -LAP M- (membrane protease). As previous step, the zinc-binding capacity of these nanoparticles was evaluated. Interestingly, an improvement of both the zinc-binding capacity and the antiprotease effect of chitosan was observed when the biopolymers (chitosan and thiolated chitosan) were used as coating component of the core–shell nanoparticles, in comparison with their behaviour in solution, thanks to the different biopolymer chains rearrangement. The presence of amino, hydroxyl and thiol groups on the nanoparticle surface promoted zinc binding and hence the inhibition of the metallopeptidases analysed. On the contrary, the occurrence of a cross-linked structure in the gel layer surrounding the PIBCA cores of thiolated formulations, due to the formation of interchain and intrachain disulphide bonds, partially limited the inhibition of the proteases. The low accessibility of cations to the active groups of the cross-linked polymeric shell was postulated as a possible explanation of this behaviour. Results obtained in this work make this family of surface-modified nanocarriers promising candidates for the successfull administration of pharmacologically active peptides and proteins by the oral route.     

Revisiting non-degenerate parametric down-conversion

The quantum dynamics of a two-mode non-resonant parametric down-conversion process is studied by recasting the time evolution equations for the basic operators in an equivalent spin equation form with simpler exact solutions for a pump field with harmonic time dependence. Expectation values of suitable operators for studying important features such as squeezing and quantum revivals are presented in simple forms.      

Experimental study on generation of high energy few cycle pulses with hollow fiber filled with neon

25 fs pulses with energy up to 0.8 mJ from a multi-pass amplifier system have been spectrally broadened from 460 nm to 950 nm due to strong self-phase modulation (SPM) effect in a gas filled hollow fiber. Using a set of chirped mirrors, the ultra-broadband dispersion compensation was achieved, and the compressed pulses reached their transform limit. Under optimized conditions we achieved pulses with duration of 5.1 fs and with energy of 400 μJ, corresponding to the peak power up to 80 GW. Supported by the National Natural Science Foundation of China (Grant Nos. 60608003, 60490280, 60225005 and 60621063)