Cyclization of N,N-diethylgeranylamine N-oxide in one-pot operation: preparation of cyclic terpenoid-aroma chemicals

Acid promoted cyclization of the geranylamine N-oxide (E)-4 followed by base-catalyzed intramolecular aldol condensation afforded 1-acetyl-4,4-dimethyl-1-cyclohexene (7) in one-pot operation. Reduction of 7, which possess strong fruity odor, followed by lipase-catalyzed kinetic resolution furnished the acetate (R)-26 (>49.9% yield, >99% ee) and the recovered alcohol (S)-25 (>49.9% yield, >99% ee, herbal odor).     

Enantiomeric Separation of Underivatized Aliphatic β-Amino Alcohols by Ligand-exchange Chromatography using N-n-Dodecyl-(1R,2S)-norephedrine as a Coating Reagent for Reversed-phase Column

Underivatized aliphatic β-amino alcohols with a primary or secondary alcohol moiety were separated into enantiomers by high performance liquid chromatography using octadecylsilanized silica coated with N-n-dodecyl-(1R,2S)-norephedrine as the stationary phase and an aqueous solution containing copper(II) and barbital as the mobile phase.     

Reactions of sterically congested 1,6‐ and 1,7‐bis(diazo)alkanes with elemental sulfur and selenium: Formation of cyclohexene, 1,2‐dithiocane, 1,2‐diselenocane,and 1,2,3‐triselenecane derivatives

The reaction of 3,8‐bis(diazo)‐2,2,4,4,7,7,9,9‐octamethyldecane ( 5 ) with elemental selenium in 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) at 130°C yielded 1,2‐di‐tert‐butyl‐3,3,6,6‐tetramethylcyclohexene ( 1 ) (64%) and trans‐3,8‐di‐tert‐butyl‐4,4,7,7‐tetramethyl‐1,2‐diselenocane ( 8 ) (13%), while that of 5 with elemental sulfur in DBU gave trans‐3, 8‐di‐tert‐butyl‐4,4,7,7‐tetramethyl‐1,2‐dithiocane ( 9 ) (77%). The reaction of 3,9‐bis(diazo)‐2,2,4,4,8,8,10,10‐octamethylundecane ( 6 ) with elemental selenium in DBU at 80°C gave a cyclic triselenide, cis‐4,10‐di‐tert‐butyl‐5,5,9,9‐tetramethyl‐1,2,3‐triselenecane ( 11 ), in 15% yield as the only identifiable product. The structures of 9 and 11 were confirmed by X‐ray crystallography. © 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:351–356, 2002; Published online in Wiley Interscience (www.interscience.wiley.com). DOI 10.1002/hc.10046     

Simple and versatile method for tagging phenyldiazirine photophores

The first effective method for the introduction of a versatile substituent on 3-phenyl-3-trifluoromethyldiazirine has been developed. The simple preparation of a useful aldehyde intermediate allows easy access to various elaborated photoaffinity ligands, including a l-phenylalanine analog bearing a diazirine ring (TmdPhe). The asymmetric synthesis of TmdPhe was easily accomplished in gram quantities. Site-directed incorporation of this compound into the structure of a calmodulin-binding peptide using automated peptide synthesis afforded a photoreactive peptide that was successfully used for the specific labeling of calmodulin.     

Terahertz dichroism of MBBA liquid crystal on rubbed substrate

Terahertz (THz) dichroism of a nematic liquid N-(p-methoxybenzylidene)-p-butylaniline (MBBA) was measured using a GaP Raman THz spectrometer. MBBA on a rubbed plastic substrate generates a band at around 4.0 THz: its liquid crystal phase shows strong dichroism, which well corresponds to that of the IR absorption caused by π(CH) of MBBA molecule reported in the literature. Based on inferences drawn from the present THz and the published IR dichroic results, the 4.0 THz band probably stems from lateral intermolecular or intramolecular interactions of MBBA molecules aligned to the rubbing direction. The results clearly demonstrate that THz spectroscopy is powerful for discussing of phase transition and dichroism of liquid crystals.     

Determination of the structure of {31}ne by a fully microscopic framework

We perform the first quantitative analysis of the reaction cross sections of {28-32}Ne by {12}C at 240 MeV/nucleon, using the double-folding model with the Melbourne g matrix and the deformed projectile density calculated by antisymmetrized molecular dynamics. To describe the tail of the last neutron of {31}Ne, we adopt the resonating group method combined with antisymmetrized molecular dynamics. The theoretical prediction excellently reproduces the measured cross sections of {28-32}Ne with no adjustable parameters. The ground state properties of {31}Ne, i.e., strong deformation and a halo structure with spin parity 3/2{-}, are clarified.     

Local conformation of poly(1-adamantyl methacrylate) evaluated from intrinsic viscosity

The dilute-solution properties of poly(1-adamantyl methacrylate), which was prepared by radical polymerization in benzene at 60 °C and fractionated with benzene and ethanol as solvent and nonsolvent, respectively, were examined by the measurement of intrinsic viscosities in benzene, tetrahydrofuran, and cyclohexanone at 30°C. The Mark-Houwink-Sakurada equations were established for each solvent-polymer system. From the viscosity data in these three solvents by means of the Burchard-Stockmayer-Fixman plot, the characteristic ratio and steric factor of the chain were determined to be 16.7 and 2.9, respectively, which are higher than the values reported for other methacrylate polymers bearing cycloalkyl esters.     

Monomer-isomerization polymerization. XIII. Monomer-isomerization polymerization of 1,4-cyclohexadiene with Ziegler-Natta catalyst

1,4-Cyclohexadiene underwent monomer-isomerization polymerization to yield poly(1,3-cyclohexadiene) with a Ziegler-Natta catalyst comprising TiCl₄–Al(C₂H₅)₃ catalyst with Al/Ti molar ratios of 0.5–3.0 at 60°C for 96 hr. Good yields of polymer were obtained (49.5% yield at Al/Ti = 3.0; [η] = 0.04 dl/g). The infrared and NMR spectra of the polymer were identical to those of poly-(1,3-cyclohexadiene), confirming that 1,4-cyclohexadiene first isomerizes to 1,3-cyclohexadiene and then homopolymerizes to give poly-1,3-cyclohexadiene. 1,3-Cyclohexadiene polymerized without isomerization easily in the presence of TiCl₃–Al(C₂H₅)₃ catalyst at Al/Ti molar ratios of 0.5–3.0 at 60°C for 3 hr (76.3% yield at Al/Ti = 3.0; [η] = 0.06 dl/g).     

Vinyl polymerization initiated by the (dimethylaniline-n-oxide)/(phenacyl bromide) system

Binary systems consisting of dimethylaniline-N-oxide (DMOA) and some α-halo-carbonyl compounds, such as phenacyl halide and α-halo-acetic acid ester, were found to induce radical polymerization of vinyl monomers. Bromo-derivatives showed higher initiating activities than chloroderivatives. The polymerization of methyl methacrylate (MMA) with DMAO and phenacyl bromide (PBr) was investigated kinetically. The polymerization rate (R_p) was expressed as follows; $\text{R}{}_{\mathrm{<mtext>p</mtext>}}\text{=}\text{k[DMAO]}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{[}\text{PBr}\text{]}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{[}\text{MMA}\text{]}$.The overall activation energy of the polymerization was calculated to be 42.7 kJ mol^?1. No noticeable chain-transfer from the polymer radical to DMAO or PBr was observed. The benzoyl radical was trapped by 2-nitroso-2-methylpropane, a spin trapping reagent, in the reaction of DMAO and PBr. The u.v. spectrum of poly (MMA) obtained suggests that the polymer contains end-groups similar to acetophenone and DMA. From the results, an initiation mechanism for the polymerization has been proposed and discussed.