Study of flow rate in pressurized gradient capillary electrochromatography using splitter and separation of peptides using an Amide stationary phase

A pressurized gradient capillary electrochromatograph using a splitter was constructed. The variation in flow rate during gradient elution was investigated and separations of peptides using an Amide stationary phase were demonstrated. The flow rate, which is one of the important factors to control chromatographic behavior, was increased during the gradient elution, and the mismatching of mobile phase between the column and the resistance tubing derived three variation patterns in the flow rate. The electrophoretic migration in electrochromatography could enhance in separation of peptides. The separated peak number of tryptic digest of bovine serum albumin was increased from 30 to 40 by the application of +5 kV.     

Generation of functionalized asymmetric benzynes with TMP-zincates. Effects of ligands on selectivity and reactivity of zincates

We have developed new methods for preparing functionalized benzynes through deprotonative zincation as a key reaction using R2Zn(TMP)Li, and we also describes dramatic ligand effects on the benzyne formation. Deprotonative zincation of various meta-substituted bromobenzenes with Me2Zn(TMP)Li proved effective for the one-pot generation of various 3-functionalized benzynes, particularly those electrophilic substituents such as ester, amide, and cyano. On the other hand, zincation with tBu2Zn(TMP)Li, followed by electrophilic trapping (with I2) proved a powerful tool for the preparation of 1,2,3-trisubstituted aromatic compounds.8 The resultant 1,2,3-trisubstituted benzenes are available as precursors for generation of 3-substituted benzynes by halogen-zinc exchange reactions with Me3ZnLi. These methods offer far greater generality than previous methods for the synthesis of functionalized asymmetric benzynes, and should be of value in new syntheses of various natural products and functional materials. In addition, these results underline the utility of spectator ligands on the central metal of ate complexes as a tunable functionality in the development of new ate complex-promoted reactions.     

trans-2,2'-Bi(1-phenyladamantylidene): the most twisted biadamantylidene

The Grignard coupling of 2,2-dibromo-1-phenyladamantane gave trans-2,2'-bi(1-phenyladamantylidene) (1-Ph). Single-crystal X-ray analysis indicated that 1-Ph has a 23.2 degrees twisted double bond, which is much more distorted than that of parent 2,2'-biadamantylidene (1-H) and that of the ethyl-substituted derivative (1-Et). A cyclic voltammogram showed a reversible electron oxidation wave at 0.87 V vs Fc/Fc(+), which is 0.19 V lower than 1-H, indicating a significant increase in the HOMO energy level due to the distortion. The reaction of 1-Ph with 0.9 equiv of bromine gave an intramolecular Friedel-Crafts alkylation product, while bromination of 1-H and 1-Me has been reported to give a bridged bromonium ion and a rearranged product, 2-(1-methyl-2-adamantylidene)-4-bromotricyclo[5,3,1,0(3.9)]undec-4-ene, respectively.     

Evaluation of chiral bidentate ligand–metal complexes in asymmetric 1,3-dipolar cycloaddition reaction of nitrones with 3-alkenoyl-2-oxazolidinones

For evaluation of a chiral C₂-symmetric bis(oxazoline) ligand, its Lewis acid complexes-catalyzed asymmetric 1,3-dipolar cycloaddition reactions of nitrones with electron-deficient dipolarophiles, 3-(2-alkenoyl)-1,3-oxazolidin-2-ones, have been investigated and it was found that the cycloadditions using a Cu(II)-bis(oxazoline) complex under optimized reaction conditions induced extremely high enantioselectivity.     

Super acid-induced Pummerer-type cyclization reaction: improvement in the synthesis of chiral 1,3-dimethyl-1,2,3,4-tetrahydroisoquinolines

Improved synthesis of four stereoisomeric chiral 1,3-dimethyl-1,2,3,4-tetrahydroisoquinolines (1a, b, ent-1a, b) was achieved via the super acid-induced cyclization of chiral N-[1-methyl-2-(phenylsulfinyl)ethyl]-N-(1-phenylethyl)formamides (4a, b, ent-4a, b) using the Pummerer-type cyclization reaction as a key step. The cyclization leading to the isoquinoline ring proceeded in a quantitative manner when trifluoromethane sulfonic acid (TFSA) was used as the super acid, although Friedel-Crafts-type alkylation of 4-phenylsulfanyl TIQ derivatives (5) with benzene used as the solvent accompanied cyclization to yield the 4-phenyl-TIQs (7). The byproduct (7) was exclusively formed when a large excess amount of TFSA was used.     

Multifold curdlan gel formation by dialysis into aqueous solutions of metal salts

We have found that the dialysis of curdlan dissolved in alkaline solution into aqueous solutions of metal salts yielded multifold gel structures. Aqueous sodium chloride and potassium chloride as well as pure water induced isotropic gels. Aqueous calcium salts induced liquid crystalline gel with refractive index gradient/amorphous gel alternative structure. Aqueous salts of trivalent aluminum and ferric cations induced a rigid liquid crystalline gel, which shrank above a threshold concentration of each salt. On the other hand, Liesegang ring-like pattern was observed with aqueous solutions of mixed salts of calcium chloride and magnesium chloride. The patterns have been classified to discuss the mechanism of forming the variety of structures.     

Effect of Organic Ligands Used in Sol-Gel Process on the Formation of Mullite

The preparation of mullite by the sol-gel method using organic polydentate ligands and the effect of the raw materials and organic polydentate ligands on the formation of mullite were investigated. Two series of samples were prepared using tetraethoxyorthosilicate (TEOS) and aluminum nitrate nonahydrate, or dibutoxyethylacetoacetatoaluminum (Al(OBu)₂(AcAcEt)) as the silica and alumina sources, respectively, and using ethylene glycol (EG), 1,3-propanediol (PD), 1,3-butanediol (BD), 2-methyl-2, 4-pentanediol (MPD), diethlene glycol monoethyl ether (DEME) and ethoxyethanol as the ligands. When the alumina source was aluminum nitrate nonahydrate, mullite was apt to appear in the order of EG>PD>MPD. When Al(OBu)₂(AcAcEt) was the alumina source, the tendency toward the appearance of mullite crystalline phase was EG>BD>DEME>MPD. Between the two alumina sources, aluminum nitrate nonahydrate gave mullite much easier than Al(OBu)₂(AcAcEt). These relationships were discussed from the viewpoints of the coordination ability of the ligands and the miscibility between the silica and alumina.     

Mechanism of the molecular hysteresis

The redox behavior in acetone solution of (1,5-dithiacyclooctane 1-oxide)bis(pentaammineruthenium(II)) has been characterized, where the concept of “molecular hysteresis” is presented. Detailed thermodynamics for the complex are studied, in which intramolecular electron transfer rates for Ru³⁺OS/Ru²⁺→Ru²⁺SO/Ru³⁺ were determined as 0.12 sec^?1 and 0.055 sec^?1. The molecular hysteresis consists of two important factors: isomerizations for the sulfoxideruthenium complexes and the slow intramolecular electron transfer in the complex; both are examined. Isomerization rates for Ru³⁺S→O and Ru²⁺O→S determined range from 0.4 to 5000 sec^?1 and from 0.7 to 16 sec^?1, respectively, for [Ru(NH₃)₅(sulfoxide)]^2+/3+. A mechanism for the slow electron transfer in the complex is also presented. Features of molecular hysteresis are discussed.     

Three bits eight states photochromic recording and nondestructive readout by using IR light

A photochromic polymer film containing three different diarylethene derivatives, that is, 1,2-bis(3,5-dimethyl-2-thienyl)perfluorocyclopentene (1), 1,2-bis(2,5-dimethyl-3-thienyl)perfluorocyclopentene (2), and 1,2-bis(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene (3) was prepared. Upon UV irradiation, the three derivatives changed to their closed-ring isomers having different colors, yellow, red, and blue. They showed different spectra not only in UV/Vis region but also in the IR spectral region. Upon irradiation with visible light of appropriate wavelengths, each closed-ring isomer was selectively bleached, and three bits eight states recording was performed. The eight states could be read out nondestructively by using IR light of appropriate wavenumbers.     

Engineered biosynthesis of plant polyketides: chain length control in an octaketide-producing plant type III polyketide synthase

The chalcone synthase (CHS) superfamily of type III polyketide synthases (PKSs) produces a variety of plant secondary metabolites with remarkable structural diversity and biological activities (e.g., chalcones, stilbenes, benzophenones, acrydones, phloroglucinols, resorcinols, pyrones, and chromones). Here we describe an octaketide-producing novel plant-specific type III PKS from aloe (Aloe arborescens) sharing 50-60% amino acid sequence identity with other plant CHS-superfamily enzymes. A recombinant enzyme expressed in Escherichia coli catalyzed seven successive decarboxylative condensations of malonyl-CoA to yield aromatic octaketides SEK4 and SEK4b, the longest polyketides known to be synthesized by the structurally simple type III PKS. Surprisingly, site-directed mutagenesis revealed that a single residue Gly207 (corresponding to the CHS's active site Thr197) determines the polyketide chain length and product specificity. Small-to-large substitutions (G207A, G207T, G207M, G207L, G207F, and G207W) resulted in loss of the octaketide-forming activity and concomitant formation of shorter chain length polyketides (from triketide to heptaketide) including a pentaketide chromone, 2,7-dihydroxy-5-methylchromone, and a hexaketide pyrone, 6-(2,4-dihydroxy-6-methylphenyl)-4-hydroxy-2-pyrone, depending on the size of the side chain. Notably, the functional diversity of the type III PKS was shown to evolve from simple steric modulation of the chemically inert single residue lining the active-site cavity accompanied by conservation of the Cys-His-Asn catalytic triad. This provided novel strategies for the engineered biosynthesis of pharmaceutically important plant polyketides.