氮掺杂石墨烯量子点/MOF衍生多孔碳纳米片构筑高性能超级电容器

首先采用溶液法在碳布上生长Co-MOF二维纳米片,通过高温退火和刻蚀后得到MOF衍生多孔碳纳米片。以Co-MOF衍生的多孔碳纳米片/碳布(CNS/CC)作为碳基骨架,采用电化学沉积法负载高活性氮掺杂石墨烯量子点(N-GQDs),制备得到分级多孔结构的N-GQD/CNS/CC复合材料。组装成自支撑且无粘结剂的N-GQD/CNS/CC电极,当电流密度为1 A·g~(-1)时,其比电容高达423 F·g~(-1)。通过储能机制和电容贡献机制的研究表明,在碳纤维上原位生长的具有高双电层电容的CNS和表面负载具有高赝电容的N-GQDs之间相互协同作用,使得N-GQD/CNS/CC电极具有高电容性能,是一种理想的超级电容器电极材料。电极材料的高导电、分级多孔结构有利于电子的传输和电解质离子的扩散,具有良好的动力学性能,能快速充放电和具有优异的倍率特性。将电极组装成对称型超级电容器,功率密度为250 W·kg~(-1)时对应的能量密度达到7.9 Wh·kg~(-1),且经过10 000次循环后电容保持率为91.2%,说明氮掺杂石墨烯量子点/MOF衍生多孔碳纳米片复合材料是一种电化学性能稳定的具有高电容性能的全碳电极材料。     

表面活性剂对LiNi0.80Co0.15Al0.05O2的结构和性能影响

在共沉淀过程中添加表面活性剂聚乙二醇(PEG)或聚乙烯吡咯烷酮(PVP)分别合成类球形Ni_(0.80)Co_(0.15)Al_(0.05)(OH)_2前驱体,再与氢氧化锂(LiOH·H_2O)氧化煅烧得到LiNi_(0.80)Co_(0.15)Al_(0.05)O_2(NCA)三元正极材料。利用X射线衍射(XRD)、扫描电镜(SEM)、透射电子显微镜(TEM)、循环伏安(CV)、交流阻抗(EIS)和充放电循环测试等对材料的结构、形貌、电化学性能等进行表征。结果表明:PEG和PVP的添加不影响材料中Ni、Co和Al元素的比例,能够促进一次晶粒长大和提高振实密度,能够促进正极材料层状结构发育进而提高正极材料的电化学性能。添加PEG、添加PVP和未添加表面活性剂合成正极材料的振实密度分别为2.07、1.86和1.40 g·cm~(-3),在0.2C充放电过程中首次放电比容量分别为210.8、188.9和173.0 mAh·g~(-1),以0.2C充电1C放电循环100次后电池容量保持率分别为78.8%、93.2%和82.7%,添加PEG和PVP的NCA材料表现出良好的电化学性能。     

光激发四苯基卟啉钴氧化还原反应机理研究

金属卟啉在光激发条件下会呈现出重要催化特性和光学性质。四苯基卟啉亚钴(Co~Ⅱ TPP)性质稳定,难以通过强氧化剂氧化至四苯基卟啉钴(Co~ⅢTPP)。本文分别利用全波长氙灯与355nm激光脉冲诱导Co~Ⅱ TPP,探究其分子内的氧化还原过程。研究发现,Co~Ⅱ TPP的Soret带最大吸收峰随光照时长的递增出现红移,且吸收强度呈现先下降后上升的趋势,最大吸收峰位置由415nm逐渐红移至433nm,其Q带最大吸收峰位置由532nm逐渐红移至545nm。两种光源诱导Co~Ⅱ TPP均出现稳态吸光度的降低,分子内的活性中心钴离子由Co~(2+)氧化到Co~(3+)。咪唑使得Co~Ⅱ TPP受光诱导后更易出现稳态吸收峰红移。Co~Ⅱ TPP的瞬态吸收光谱有3个瞬态吸收峰,激光激发含咪唑的Co~Ⅱ TPP溶液仅在396nm出现单个瞬态吸收峰。数据表明光激发时,电子从卟啉的π成键分子轨道向具有配体特征的π~*反键分子轨道迁移,发生金属对配体的电荷迁移,生成稳定的高价态Co~Ⅲ。     

维生素C的3种分光光度法测量比较*——仪器分析设计性实验教学的探索与实践

仪器分析设计性实验是培养大学生创新能力的重要手段和途径。根据仪器分析实验课的特点,开设“维生素C的3种分光光度法测量比较”设计性实验项目,通过文献调研、原理阐述、方案制定、性能测试、SPSS数据处理分析软件应用等实验环节,培养学生的综合能力和创新能力。分别建立了每种方法的标准曲线,比较相关系数、回收率和相对标准偏差,并对3种方法进行精密度与准确度实验。实践表明,通过设计性实验的实践,学生的实践能力、创新能力、基本科学素养和综合素质得到明显提高。     

碳化硅块状气凝胶的制备及应用

碳化硅气凝胶具有高温稳定性、低热膨胀系数、良好的抗热震性以及抗氧化和耐腐蚀等优异的性质,在高温和高腐蚀性环境下的隔热、电磁吸波、过滤和吸附等领域具有较大的应用潜力。然而,块状碳化硅气凝胶的可控制备一直是一项较大的挑战。本文综述了块状碳化硅气凝胶在制备工艺和应用两个方面的研究进展,首先分析总结了各种制备工艺及其优缺点,包括有机/SiO₂复合气凝胶碳热还原法、预陶瓷化聚合物裂解法、化学气相沉积法、高温气相渗硅法和碳化硅纳米线组装法;然后,详细介绍了碳化硅气凝胶在高温隔热和电磁吸波两个领域的应用研究进展;最后,展望了碳化硅气凝胶未来的若干发展方向。     

DMAO-activated Rare-earth Metal Catalysts for Styrene and Its Derivative Polymerization

The catalytic performance of rare-earth metal dialkyl complexes in combination with DMAO(dry methylaluminoxane)is explored.In the presence of 60 equivalents of DMAO,the half-sandwich complex(C13H8CH2Ph)Sc(CH2SiMe3)2(THF)(1)is inert for styrene polymerization,but(C5Me4Ph)Sc(CH2C6H4NMe2-o)2(2)converts 18％styrene into syndiotactic polystyrene.Under the same conditions,the constrained-geometry configuration sandium complex(C13H8CH2Py)Sc(CH2SiMe3)2(3a)displays extremely high catalytic activity(＞6420 kg·molSC-1·h-1)and perfect syndiospecific(rrrr＞99％)for styrene polymerization,while its lutetium(3b)and yttrium(3c)analogues are nearly inactive.Although the binary catalytic system 3a/DMAO exhibits very low activity for 4-methoxystyrene polymerization,it is an efficient catalyst for the syndioselective polymerization of other styrene derivatives such as 2-methoxystyrene,4-methylthiostyrene,4-fluorostyrene,4-dimethylhydrosilylstyrene,alkyne-susbstituted styrenes and 4-methylstyrene.In addition,the binary system 3a/DMAO can copolymerize ethylene and styrene to give alternating copolymers with a single glass transition at 80℃and 0.4 MPa ethylene pressures.By increasing styrene feed amount from 20 mmol to 60 mmol,the styrene content slight increases from 48.2 mol％to 53.8 mol％,but the polymerization activity is obviously promoted from 240 kg·molSc-1·h-1 to 532 kg·molSc-1·h-1.     

水洗和回烧工艺对高镍三元材料LiNi0.88Co0.07Al0.05O2微观结构及电化学性能的影响

以镍钴氢氧化物、异丙醇铝为原料,采用水解法合成三元前驱体Ni_(0.88)Co_(0.07)Al_(0.05)O_2,再与锂盐混合烧结得到正极材料(TEM)、X射线光电子能谱(XPS)、能量色散X射线谱(EDS)和恒电流充放电测试等对样品的晶体结构、微观形貌、元素价态以及电化学性能进行表征。研究表明,料液比1∶25、水洗3次、600℃回烧2 h合成的LiNi_(0.88)Co_(0.07)Al_(0.05)O_2具有较优的综合电化学性能,其在0.2C的放电比容量达207.6 mAh·g~(-1),首次充放电效率为84.8%,1C放电比容量为192.0 mAh·g~(-1),循环100周后,材料的放电比容量仍有148.0 mAh·g~(-1),容量保持率达到77.1%。     

离子对UIO-66-2OH光催化性能的影响

实际废水中存在的离子会对有机污染物的光催化降解产生影响。以ZrCl₄和2,5-二羟基对苯二甲酸为原料,通过水热合成法成功制备了金属有机骨架材料UIO-66-2OH。通过红外（IR）、X射线粉末衍射（XRD）、X射线光电子能谱（XPS）和扫描电子显微镜（SEM）对UIO-66-2OH的结构进行表征。利用水中常见的金属阳离子和无机阴离子,探索UIO-66-2OH的光催化性能。研究发现,金属阳离子Fe³⁺和无机阴离子HCO₃^-、CO₃^2-可以加快光催化降解的速度。然而,金属离子Na⁺、K⁺、Ca²⁺、Mg²⁺、Cu²⁺和无机阴离子Cl^-、SO₄^2-、PO₄^3-会抑制光催化性能,且离子价态越高,抑制效果越明显。     

应用于染料敏化太阳能电池的基于染料R6的含有不同吸电子基团的有机染料的理论研究

Dye-sensitized solar cells (DSSCs) are the most promising alternatives to traditional fossil energy because of their advantages of low production cost, facile structure, relatively low environmental impact, relatively high photoelectronic absorption efficiency, and overall high efficiency. In addition, several studies on sensitizers as vital components have been conducted over the last three decades. Compared to metal dyes, metal-free organic dyes have been considered as promising candidates because of their simple fabrication, multiple structures, high molar absorption coefficients, easily tunable properties, and environmental friendliness. In this study, we systematically investigated the optoelectronic properties of six metal-free organic donor-acceptor dyes (RD1–6) derived from the known dye R6 by using the density functional theory (DFT) and time-dependent DFT methods. Cell performance parameters were discussed, including the geometrical and electronic structures, absorption spectrum, adsorption energy, light harvesting efficiency (LHE) curve, predictive short circuit current density (J_sc^Pred.), predictive open circuit voltage (V_oc^Pred.), and theoretical power conversion efficiency (PCE). Results revealed that all the designed dyes exhibited high theoretical PCE. In particular, dyes RD1, 2, and 4–6 showed greater conjugations, and dyes RD1–3 had smaller energy gaps than those of the reference dye. In addition, dyes RD1–3, 5, and 6 exhibited better light harvesting capacities that covered the entire visible region and extended to the near-infrared region with obviously red-shift maximum absorption wavelengths (λ_max), wider LHE curves, and higher J_sc^Pred. as compared to the reference dye. It was critical that dyes RD1 and 2 not only have greater conjugations and narrow band gaps but also good light harvesting capacities with more than 56-nm red-shift maximum absorption wavelengths and broadened LHE curves than those of the reference dye. Notably, mainly because of an average increment of 12.0% of J_sc^Pred., a remarkable increment of the theoretical power conversion efficiency was observed from 12.6% for dye R6 to 14.1% for dyes RD1 and 2. Thus, dyes RD1 and 2 exhibited superior cell performances and could be promising sensitizer candidates for highly efficient DSSCs. These results could be used to guide effective synthetic efforts in the discovery of efficient metal-free organic dye sensitizers in DSSCs.     

Ba2+沉淀法提取生物油馏分中的酚类物质

从NaOH试剂浓度、反应温度与反应时间三个方面,对钡离子沉淀法提取不同温度段收集的生物油馏分中的酚类物质进行了实验研究,并利用气相色谱-质谱联用仪（GC-MS）对提取效果进行了分析。实验结果表明,钡离子沉淀法对愈创木酚类物质的提取效果较为突出,且NaOH浓度（1.0-6.0mol/L）、反应温度（30-50℃）与反应时间（10-40min）对愈创木酚的提取率影响较大。在NaOH浓度为5.5mol/L、反应温度为35℃、反应时间为20min时,提取率达到最大,其中,三个温度段收集的生物油即低温水相馏分、低温油相馏分与高温馏分中的愈创木酚提取率分别为34.1%、33.8%和33.5%。