Chemische Vitamin D<Subscript>3</Subscript>-Bestimmung in Lebertran

The different aspects of Vitamin D₃ determination and the data reported in the literature are discussed. The spectrophotometric determination of Vitamin D₃ in cod-liver oil is carried out after the alkaline saponification, extraction of unsaponified parts, precipitation of accompanying sterols and the column- and thin-layer chromatographic purification and separation of vitamin D₃ on 40 cm plates from other vitamins. The dyestuff α-naphtholbenzein is suited well as standard substance for the better location and identification of vitamin D₃ zone on the thin-layer plate. The results obtained from the chemical method were checked through the simultaneous biological determination.     

Heteropolynuclear Sodium(I) Lead(II) Complex: Crystal and Molecular Structure of a Novel 3‐D Polymer, [(en)Pb(μ3‐ONO)2Na(μ3‐ONO)2Na(μ‐O2ClO2)Na]n

A novel 3D polymeric heteropolynuclear sodium(I) lead(II) complex containing different ligands, [NaPb(ClO₄)(en)(NO₂)₂] was synthesized and characterized by elemental analysis and IR, and ¹H‐, ¹³C‐, and ²⁰⁷Pb‐NMR spectroscopy. The single‐crystal X‐ray data of [NaPb(ClO₄)(en)(NO₂)₂]_n established that the complex is a three‐dimensional polymer, [(en)Pb(μ₃‐ONO)₂Na(μ₃‐ONO)₂Na(μ‐O₂ClO₂)Na]_n. The Pb and Na atoms have four‐ and eight‐coordinate geometry, respectively. The lone pair of electrons at the Pb^II atom is ‘stereochemically active’.     

Enhancing the enzymatic hydrolysis of cellulosic materials using simultaneous ball milling

One of the limiting factors restricting the effective and efficient bioconversion of softwood-derived lignocellulosic residues is the recalcitrance of the substrate following pretreatment. Consequently, the ensuing enzymatic process requires relatively high enzyme loadings to produce monomeric carbohydrates that are readily fermentable by ethanologenic microorganisms. In an attempt to circumvent the need for larger enzyme loadings, a simultaneous physical and enzymatic hydrolysis treatment was evaluated. A ball-mill reactor was used as the digestion vessel, and the extent and rate of hydrolysis were monitored. Concurrently, enzyme adsorption profiles and the rate of conversion during the course of hydrolysis were monitored. α-Cellulose, employed as a model substrate, and SO₂-impregnated steam-exploded Douglas-fir wood chips were assessed as the cellulosic substrates. The softwood-derived substrate was further posttreated with water and hot alkaline hydrogen peroxide to remove >90% of the original lignin. Experiments at different reaction conditions were evaluated, including substrate concentration, enzyme loading, reaction volumes, and number of ball beads employed during mechanical milling. It was apparent that the best conditions for the enzymatic hydrolysis of α-cellulose were attained using a higher number of beads, while the presence of air-liquid interface did not seem to affect the rate of saccharification. Similarly, when employing the lignocellulosic substrate, up to 100% hydrolysis could be achieved with a minimum enzyme loading (10 filter paper units/g of cellulose), at lower substrate concentrations and with a greater number of reaction beads during milling. It was apparent that the combined strategy of simultaneous ball milling and enzymatic hydrolysis could improve the rate of saccharification and/or reduce the enzyme loading required to attain total hydrolysis of the carbohydrate moieties.     

Poly(N‐Bromobenzene‐1,3‐Disulfonylamide), N,N,N′,N′‐Tetrabromobenzene‐1,3‐Disulfonylamide and DABCO‐Bromine Complex: As Novel Reagents for the Oxidative Coupling of Thiols to Disulfides

An efficient method for the oxidative coupling of thiols to their corresponding disulfides by new reagents poly(N‐bromobenzene‐1,3‐disulfonylamide) PBBS , N,N,N′,N′‐tetrabromobenzene‐1,3‐disulfonylamide TBBDA and DABCO‐bromine complex is described. The reaction was applicable to a variety of thiols with high chemoselectivity.     

Tribromoisocyanuric Acid (TBCA) and Oxone®‐MX Systems as Oxidizing Agents: Oxidative Coupling of Thiols to Their Corresponding Disulfides under Mild and Heterogeneous Conditions

Tribromoisocyanuric acid (TBCA) and Oxone^®‐MX systems were used as effective oxidizing agents for the oxidation of thiols to their corresponding disulfides under mild conditions at room temperature with good to excellent yields.     

Solid Phase Extraction and Flame Atomic Absorption Spectrometric Determination of Trace Amounts of Zinc and Cobalt Ions in Water Samples

A simple and rapid method for the preconcentration of Co²⁺ and Zn²⁺ as their 2-guanidino-benzimidazole chelates is proposed using an octadecyl silica cartridge. The retained analytes were recovered with a mixture of 5mL of 0.01M HNO₃ and 5mL of methanol. The metal ions in the effluent were determined by flame atomic absorption spectrometry. The effect of different parameters, such as sample matrix, amount of ligand, type of eluent for elution of ions from cartridge, flow rates of sample solution and eluent, breakthrough volume, and limit of detection, were evaluated. The effects of various cationic and anionic interferences on the percent recovery of Co²⁺ and Zn²⁺ were also studied. Quantitative extraction efficiencies were obtained by elution of the cartridge with a minimal amount of solvent. Hence, with a typical preconcentration factor of 50, the limits of detections of the proposed method are 0.26 and 1.62ngmL^–1 for Zn²⁺ and Co²⁺, respectively. The method was applied to the determination of zinc and cobalt ions in different water samples.     

Microemulsion-based synthesis of CeO(2) powders with high surface area and high-temperature stabilities

Pure ceria powders, CeO(2), were synthesized in heptane-microemulsified aqueous solutions of CeCl(3) or Ce(NO(3))(3) stabilized by AOT (sodium bis(2-ethylhexyl) sulfosuccinate), DDAB (di-n-didodecyldimethylammonium bromide), or DDAB + Brij 35 surfactant mixtures. Micellar DTAB (n-dodecyltrimethylammonium bromide) and vesicular DDAB systems were also used as media for generating CeO(2). Characterization of the powders by X-ray powder diffractometry, laser-Raman spectroscopy, and Fourier transform infrared spectroscopy revealed that in the presence of surfactants almost-agglomerate-free nanosized crystallites (6-13 nm) of anionic vacancy-free cubic CeO(2) were produced. In the absence of surfactants 21-nm-sized crystallites were formed, comparing with the 85-nm-sized crystallites when cubic CeO(2) was created via thermal decomposition of cerium oxalate. Surface characterization, by X-ray photoelectron spectroscopy, N(2) sorptiometry, and high-resolution electron microscopy showed AOT- or (DDAB + Brij 35)-stabilized microemulsions to assist in formation of crystallites exposing surfaces of large specific areas (up to ca. 250 m(2)/g) but of low stability to high-temperature calcination (28-13 m(2)/g at 800 degrees C). In contrast, the double-chained DDAB was found to generate cubic CeO(2) crystallites of lower initial surface areas (144 (microemulsion) to 125 (vesicles) m(2)/g)) but of higher thermal stability (55-45 m(2)/g at 800 degrees C). Hence, the latter cerias could be considered as appropriate components for total oxidation (combustion) catalysts.     

Characterization of oligosaccharide moieties of intact glycoproteins by microwave-assisted partial acid hydrolysis and mass spectrometry

A method, which utilizes microwave-assisted partial acid hydrolysis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS), to elucidate oligosaccharide composition of intact glycoproteins is presented here. Glycoproteins, such as ribonuclease B, avidin, alpha1-acid glycoprotein, and fetuin, are used as model systems to demonstrate this technique. Partial cleavage of oligosaccharides from whole intact glycoproteins with trifluoroacetic acid was observed after a short exposure to microwaves. Due to the high-resolution mass spectra obtained by MALDI-TOFMS from glycoproteins with molecular weights less than 20 kDa, the compositions of oligosaccharides are readily derived for ribonuclease B and avidin. The data agree with the proposed oligosaccharide structures of ribonuclease B (five glycoforms) and avidin (eight glycoforms). Larger glycoproteins such as alpha1-acid glycoprotein (many glycoforms) and fetuin (many glycoforms) exhibited only broad peaks with no glycoform resolution. Nevertheless, this method can be used successfully for analysis of glycoproteins with molecular weights greater than 20 kDa to determine the presence or absence of glycosylation.     

Stereoselective synthesis of 4-hydroxy-2-phenylproline framework

Highly diastereoselective (>20:1) bromo-lactonization of N-sulfonyl-2-allyl-2-phenylglycine methyl ester (11) was observed. Successive treatment of the chiral lactone with MeONa gave the desired (2S,4R)-4-hydroxy-2-phenylproline derivative in high yield without erosion of the diastereoselectivity. The starting chiral non-racemic compound (5) was prepared from the racemic 2-phenylglycine using a classical kinetic resolution (crystallization), an asymmetric phase transfer alkylation, and an enzyme-catalyzed kinetic resolution.