Synthesis and catalytic properties of soluble platinum nanoparticles protected by a thiol monolayer

Several new platinum monolayer protected clusters (MPCs) have been synthesized and characterized. Two methods of platinum reduction were used depending on the solubility of the thiol: sodium borohydride for the water-soluble thiols and lithium triethylborohydride for the organic soluble thiols. In general, reactant solutions containing a 1:1 thiol/Pt ratio yielded the best particles in a single-phase reaction. Higher thiol/Pt ratios produced lower yields of MPCs, while much lower ratios produced gray-black precipitates. The Pt MPCs were used as catalysts to hydrogenate allyl alcohol to propanol by reducing the carbon-carbon double bond. The Pt-mercaptoammonium MPCs were also used as catalysts in the hydrogenation of maleic acid to succinic acid. Differences in the catalytic hydrogenation rates among the various monolayer coatings for MPCs are attributed to the variations in ligand chain length, branching, charged functional groups, packing density, and core size.     

Superconductivity in copper, silver, and gold compounds

High-temperature superconductivity exists in layered, square-planar cuprates, but is almost absent in most other Cu(II) compounds and in most Ag(II) and Au(II) compounds. Valence state II is quite unusual in silver and gold and often disproportionates to valence states I and III ("negative-U compounds"). The two-electron difference in oxidation state is suggestive of electron pairing, a prerequisite for superconductivity. In the present paper the connection between disproportionation and geometrical structure on one hand and superconductivity on the other is discussed by using the accepted theory for mixed valence complexes. It is concluded that absence of superconductivity in gold and silver compounds can be connected to the instability of oxidation state II and the large difference in equilibrium geometry between oxidation states I and III.     

Thermodynamic analysis of lysozyme adsorbed to silica

The structural stability of hen egg white lysozyme in solution and adsorbed to small colloidal silica particles at various surface concentrations was investigated using hydrogen-deuterium (H/D) exchange in combination with mass spectrometry (HDX-MS) and differential scanning calorimetry (DSC). The combination of HDX-MS and DSC allows a full thermodynamic analysis of the lysozyme structure as both the enthalpy and the Gibbs free energy can be derived from the various measurements. Moreover, both HDX-MS and DSC provide information on the relative structural heterogeneity of lysozyme in the adsorbed state compared to that in solution. Results demonstrated that at high surface coverage, the structural stability of lysozyme was only marginally affected by adsorption to silica particles whereas the unfolding enthalpy decreased by more than 10%, meaning that the entropy of lysozyme increased with a similar value upon adsorption. Furthermore, the structural heterogeneity increased considerably. At lower surface concentrations, the structural heterogeneity increased further whereas the enthalpy of unfolding decreased. Further analyses of the HDX-MS experiments clearly indicated that folding/unfolding of lysozyme occurs through a two-domain process. These two domains had a similar amount of structural elements and a difference in stabilization energy of 8 kJ/mol, regardless if lysozyme was in solution or adsorbed to silica.     

Double Yielding in a Styrene/Butadiene Star Block Copolymer

Summary: The morphology and tensile deformation behaviour of a highly asymmetric styrene/butadiene star block copolymer (polystyrene (PS) content = 74%) containing random PS‐co‐PB (polybutadiene) copolymer as a rubbery phase were investigated. The existence of double yielding, similar to that observed in some semicrystalline polymers, was detected in this nanostructured amorphous polymer. The observed phenomenon may be correlated with two different micromechanical processes taking place at the initial stage of deformation.

The stress‐strain curve of the star block copolymer prepared here (each curve represents a different method). The two yield points are clearly visible (labelled I and II).     

Synthesis and photophysics of a novel photocatalyst for hydrogen production based on a tetrapyridoacridine bridging ligand

Molecular photocatalysts allow for selectively tuning their function on a molecular level based on an in-depth understanding of their chemical and photophysical properties. This contribution reports the synthesis and photophysical characterization of the novel molecular photocatalyst [(tbbpy)₂Ru(tpac)PdCl₂]²⁺RutpacPd (with tpac = tetrapyrido[3,2-a:2′,3′-c:3″,2″-h:2?,3?-j]acridine) and its mononuclear building block. Furthermore, detailed photocatalytic activity measurements of RutpacPd are presented. The introduction of the tpac-ligand into the molecular framework offers a potential route to reduce the impact of water as compared to the well-studied class of RutpphzPd (with tpphz = tetrapyrido[3,2-a:2′,3′-c:3″,2″-h:2?,3?-j]phenazine) complexes. The distinct impact of water on the electron-transfer processes in tpphz-ligands stems from the possibility of water to form hydrogen bonds to the phenazine nitrogen atoms and will potentially reduced when replacing the phenazine by the acridine unit. The effect of this structural variation on the catalytic properties and the underlying ultrafast intramolecular charge transfer behavior will be discussed in detail.     

Electroclinic properties of chiral smectic a liquid crystalline polymers and block copolymers

The scope for the synthesis and investigation of chiral smectic A liquid crystalline (LC) polymers and block copolymers is discussed. LC block copolymers can combine the molecular order of liquid crystals and the supramolecular order typical of block copolymers, thus allowing to attain information on mesomorphic responses in restricted geometries. We present a general overview on several aspects of the syntheses and properties of LC block copolymers, specifically those obtained by starting from azomacroinitiators. These materials can exhibit an electroclinic effect, that is an electrically induced molecular tilt, which is characterized by a linear dependence on the applied field and a very fast response time in the paraelectric smectic A phase. The current progress in their potential application in electrooptics is outlined.     

Triphenylene silanes for direct surface anchoring in binary mixed self-assembled monolayers

New triphenylene-based silanes 2-(ω-(chlorodimethylsilyl)-n-alkyl)-3,6,7,10,11-penta-m-alkoxytriphenylene 4 (Tm-Cn) with n = 8 or 9 and m = 7, 8, 9, 10, or 11 were synthesized, and their self-assembly behavior in the liquid state and at glass and silicon oxide surfaces was investigated. The mesomorphic properties of triphenylene silanes 4 (Tm-Cn) and their precursors 3 (Tm-Cn) were determined by differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and X-ray diffraction. From the small-angle X-ray scattering (SAXS) regime, a preferential discotic lamellar mesophase can be deduced, and wide-angle X-ray scattering (WAXS) highlights the liquid-like characteristics of the alkyl side chains. To transfer these bulk structural properties to thin films, self-assembled monolayers (SAMs) were obtained by adsorption from solution and characterized by water contact angle measurements, null ellipsometry, and atomic force microscopy (AFM). Employing the concentration as an additional degree of freedom, binary SAMs of 2-(ω-(chlorodimethylsilyl)-undecyl)-3,6,7,10,11-penta-decyloxytriphenylene 4 (T10-C11) were coassembled with chlorodecyldimethylsilane or chlorodimethyloctadecylsilane, and their capability as model systems for organic templating was evaluated. The structure of the resulting binary mixed SAMs was analyzed by water contact angle measurements, null ellipsometry, and X-ray reflectivity (XRR) in combination with theoretical modeling by a multidimensional Parratt algorithm and AFM. The composition dependence of film thickness and roughness can be explained by a microscopic model including the steric hindrance of the respective molecular constituents.     

Switching the Mechanism of NADH Photooxidation by Supramolecular Interactions

A series of three Ru(II) polypyridine complexes was investigated for the selective photocatalytic oxidation of NAD(P)H to NAD(P)⁺ in water. A combination of (time-resolved) spectroscopic studies and photocatalysis experiments revealed that ligand design can be used to control the mechanism of the photooxidation: For prototypical Ru(II) complexes a ¹O₂ pathway was found. Rudppz ([(tbbpy)₂Ru(dppz)]Cl₂, tbbpy=4,4'-di-tert-butyl-2,2'-bipyridine, dppz=dipyrido[3,2-a:2′,3′-c]phenazine), instead, initiated the cofactor oxidation by electron transfer from NAD(P)H enabled by supramolecular binding between substrate and catalyst. Expulsion of the photoproduct NAD(P)⁺ from the supramolecular binding site in Rudppz allowed very efficient turnover. Therefore, Rudppz permits repetitive selective assembly and oxidative conversion of reduced naturally occurring nicotinamides by recognizing the redox state of the cofactor under formation of H₂O₂ as additional product. This photocatalytic process can fuel discontinuous photobiocatalysis.     

Macrocyclic polymerization - a new approach to molecular engineering

2,2-Dibutyl-2-stanna-1,3-dioxacycloalkanes were used as cyclic initiators for the ring-opening polymerization of various lactons. This method exclusively yielded series of macrocyclic polylactones without any competition with linear polymers. Under optimized reaction conditions these macrocyclic polymerizations obey the pattern of “living polymerizations”. The living chain ends allow the syntheses of macrocyclic blockcopolymers. The macrocyclic polylactones react with carboxylic acid chlorides by ring-opening yielding telechelic oligo or polylactones. Furthermore, the tin containing macrocyclic polylactones can be used as difunctional “monomers” for polycondensations with dicarboxylic acid dichlorides.     

Nucleation of Organic Crystals—A Molecular Perspective

The outcome of synthetic procedures for crystalline organic materials strongly depends on the first steps along the molecular self‐assembly pathway, a process we know as crystal nucleation. New experimental techniques and computational methodologies have spurred significant interest in understanding the detailed molecular mechanisms by which nuclei form and develop into macroscopic crystals. Although classical nucleation theory (CNT) has served well in describing the kinetics of the processes involved, new proposed nucleation mechanisms are additionally concerned with the evolution of structure and the competing nature of crystallization in polymorphic systems. In this Review, we explore the extent to which CNT and nucleation rate measurements can yield molecular‐scale information on this process and summarize current knowledge relating to molecular self‐assembly in nucleating systems.