Unusual enlargment of magnetic interactions in the lowest excited states of nitroxide radical chromium(III) complexes as revealed by magnetic circular dichroism and luminescence

Magnetic circular dichroism and NIR luminescence of nitroxide radical complexes, [Cr(III)(beta-diketonato)(2)(NIT2py or IM2py)]PF(6), demonstrate that the energy gaps between the singlet ((1)L(D)) and triplet ((3)L(D)) spin coupled levels in the lowest excited (2)E(g),(2)T(1g) states are much larger than those in the ground state. This is the first observation of magnetic interactions in the excited states of radical complexes, which could be elucidated in terms of the exchange mechanism.     

Release from or through a wax matrix system. II. Basic properties of release from or through the wax matrix layer

In order to examine basic properties of release from and through wax matrix layer, reservoir device matrix tablet was prepared from a physical mixture of hydrogenated caster oil and drug that was the same one in the reservoir. Release process could be divided into two stages. The first stage was the formation process of water channel by dissolving the drug in the wax matrix layer, and dissolved drug was released from the matrix layer following the square-root-of-time law equation. Hence, the drug penetration coefficient and tortuosity in the matrix layer were estimated. The second stage was the zero order release process of drug in the reservoir through the wax matrix layer. The release rate constant was calculated from the slope of line. Hence, the drug permeability coefficient and tortuosity were estimated. Fundamentally, tortuosity can not be expressed by some meaningful factors, and is obtained as an experimental result. By preparing wax matrix system from a physical mixture other than melted granule method, it was suggested that the matrix structure was uniform three-dimensionally. As a result, tortuosity could be expressed by a function of porosity, because unrecognized factors such as the surface coverage and thickness of melted wax on the soluble component should not be involved.     

Practical synthesis of a neuropeptide Y antagonist via stereoselective addition to a ketene

[Reaction: see text]. The synthesis of neuropeptide Y antagonist 1, currently under clinical investigation for the treatment of obesity, is described. The convergent synthesis from trans-spirolactone carboxylic acid intermediate 2a and aminopyrazole 3 is predicated on a stereoselective route to the former. The coupling reaction of ethyl 4-oxocyclohexanecarboxylate (10a) with lithiated isonicotinamide 11 was investigated in detail, but even optimized conditions only provided a 45:55 ratio of trans:cis isomers (12a:12b). While selective crystallization schemes were developed to isolate the thermodynamically less stable trans isomer 2a, improved stereocontrol was subsequentially achieved by the application of ketene chemistry. The ketene formation and quench was investigated under a variety of conditions aimed at maximizing the trans:cis ratio. Reacting a mixture of carboxylic acids 2a and 2b with POCl3 in THF, followed by concomitant addition of tert-butyl alcohol in the presence of TMEDA at 35 degrees C provided a 4:1 ratio of trans:cis tert-butyl esters (18a:18b) via in situ ketene formation. Ester hydrolysis, followed by selective crystallization of undesired 2b as the HCl salt, led to isolation of 2a in 47% overall yield. Aminopyrazole intermediate 3 was synthesized via the condensation reaction of 2-fluorophenylhydrazine hydrochloride (4a) with acrylonitrile derivative 5 in 65-70% yield. Coupling of advanced intermediates 2a and 3b via activation with thionyl chloride gave a 92% yield of 1.     

Comparison of separation behavior of benzodiazepines in packed capillary electrochromatography and open-tubular capillary electrochromatography

Packed column capillary electrochromatography (CEC), open-tubular CEC and microcolum liquid chromatography (LC) using a cholesteryl silica bonded phase have been studied to compare the retention behavior for benzodiazepines. It has been found that packed column CEC gives better resolution, faster analysis time than microcolumn LC for benzodiazepines maintaining similar selectivity except for some solutes which are charged species under the separation conditions. However, open-tubular CEC gave different selectivities to a larger extent for charged benzodiazepines from that which should be produced by the chromatographic properties of the cholesteryl silica phase. Charged species migration times are mainly influenced by electrophoretic mobility rather than the chromatographic interactions.     

Compressed Corannulene in a Molecular Cage

Self‐assembled coordination cages can be employed as a molecular press, where the bowl‐shaped guest corannulene (C₂₀H₁₀) is significantly flattened upon inclusion within the hydrophobic cavity. This is demonstrated by the pairwise inclusion of corannulene with naphthalene diimide as well as by the dimer inclusion of bromocorannulene inside the box‐like host. The compressed corannulene structures are unambiguously revealed by single‐crystal X‐ray analysis.     

Heat of Terpolymerization

Abstract

A novel correlation for predicting the heat of terpolymerization from the binary data is proposed. This correlation is applicable to the ternary system with monomers which obey the Q-e scheme. The heat of terpolymerization for the ternary system methyl methacrylate-styrene-acrylonitrile is calculated from binary data.     

Isolation of Biphenyl and Polychlorinated Biphenyl-Degrading Bacteria and Their Degradation Pathway

Four strains of biphenyl-degrading bacteria were isolated from a sewage and identified from the Rhodococcus genus (SK-1, SK-3, and SK-4) and Aquamicrobium genus (SK-2) by 16S rRNA sequence. Among these strains, strain SK-2 was most suitable for biphenyl degradation. When 0.65, 1.3, 2.6, or 3.9 mM of biphenyl was used, the biphenyl was completely degraded within 24 and 96 h of culture, respectively. However, in the case of 6.5 and 9.75 mM of biphenyl, the biphenyl degradation yields were about 80 % and 46.7 % after 120 h of culture, respectively. The isolated strains could degrade a broad spectrum of aromatic compounds including high-chlorinated polychlorinated biphenyl (PCB) congeners in the presence of biphenyl. In addition, strain SK-2 could utilize PCB congeners containing one to six chlorine substituents such as 2,2′,4,4′,5,5′-hexachlorobiphenyl. The PCB utilization rate by the strain SK-2 was increased compared to that of other PCB congener-utilizing bacteria. The four isolates metabolized 4-chlorobiphenyl to 4-chlorobenzoic acid and 2-hydroxy-6-oxo-6-(4′-chlorophenyl)-hexa-2,4-dienoic acid. These results suggest the isolated strains might be good candidates for the bioremediation of PCB-contaminated soil, especially high-saline soils.     

The Spin-Coating Process: Analysis of the Free Boundary Value Problem

In this paper, an accurate model of the spin-coating process is presented and investigated from the analytical point of view. More precisely, the spin-coating process is being described as a one-phase free boundary value problem for Newtonian fluids subject to surface tension and rotational effects. It is proved that for T > 0 there exists a unique, strong solution to this problem in (0, T) belonging to a certain regularity class provided the data and the speed of rotation are small enough in suitable norms. The strategy of the proof is based on a transformation of the free boundary value problem to a quasilinear evolution equation on a fixed domain. The keypoint for solving the latter equation is the so-called maximal regularity approach. In order to pursue in this direction one needs to determine the precise regularity classes for the associated inhomogeneous linearized equations. This is being achieved by applying the Newton polygon method to the boundary symbol.     

Comprehensive Metabolite Profiling in Genetic Resources of Garlic (Allium sativum L.) Collected from Different Geographical Regions

Garlic (Allium sativum) is the second most important Allium crop that has been used as a vegetable and condiment from ancient times due to its characteristic flavor and taste. Although garlic is a sterile plant that reproduces vegetatively through cloves, garlic shows high biodiversity, as well as phenotypic plasticity and environmental adaptation capacity. To determine the possible mechanism underlying this phenomenon and to provide new genetic materials for the development of a novel garlic cultivar with useful agronomic traits, the metabolic profiles in the leaf tissue of 30 garlic accessions collected from different geographical regions, with a special focus on the Asian region, were investigated using LC/MS. In addition, the total saponin and fructan contents in the roots and cloves of the investigated garlic accessions were also evaluated. Total saponin and fructan contents did not separate the garlic accessions based on their geographical origin, implying that saponin and fructan contents were clone-specific and agroclimatic changes have affected the quantitative and qualitative levels of saponins in garlic over a long history of cultivation. Principal component analysis (PCA) and dendrogram clustering of the LC/MS-based metabolite profiling showed two major clusters. Specifically, many Japanese and Central Asia accessions were grouped in cluster I and showed high accumulations of flavonol glucosides, alliin, and methiin. On the other hand, garlic accessions grouped in cluster II exhibited a high accumulation of anthocyanin glucosides and amino acids. Although most of the accessions were not separated based on country of origin, the Central Asia accessions were clustered in one group, implying that these accessions exhibited distinct metabolic profiles. The present study provides useful information that can be used for germplasm selection and the development of new garlic varieties with beneficial biotic and abiotic stress-adaptive traits.     

Synthesis and properties of polyfluoro(silyl)acetylene nanoparticles by reaction of fluoro(silyl)acetylenes with triethylamine

Fluoro(silyl)acetylenes, which were prepared by reaction of 1,1-difluoroethylene with silyl chlorides, reacted with triethylamine to give dark-brown colored polyfluoro(silyl)acetylene powders in excellent to moderate isolated yields. In contrast, the corresponding nonfluorinated acetylene was unable to react with triethylamine at all to afford poly(silyl)acetylene under similar conditions. Polyfluoro(silyl)acetylenes thus obtained were nanometer size-controlled cubic fine particles with a good dispersibility and stability in a variety of solvents. These polyfluoro(silyl)acetylene nanoparticles exhibited clear absorption and emission spectra related to the conjugated units in polymer main chain. Furthermore, these polyfluoro(silyl)acetylene nanoparticles were applied to the surface modification of poly(methyl methacrylate) [PMMA] film to exhibit a higher oleophobicity imparted by fluorine on their surface, compared to that on the reverse side.