Friction of fatty acids in nanometer-sized contacts of different adhesive strength

The effects of adhesion, contact area, and pressure on the lubricating properties of self-assembled monolayers on steel have been investigated with friction force microscopy. The adsorbed molecules were fatty acids with varying degrees of unsaturation (0-2 double bonds; stearic, oleic, and linoleic acid) and a rosin acid (dehydroabietic acid), adsorbed from n-hexadecane solution. The friction of these loose-packed monolayers was studied in dry N2 gas and in ethanol. Low adhesion (in ethanol) resulted in a linear increase in friction force at low loads, that is, F = muL, whereas higher adhesion (in N2 gas) gave an apparent area-dependence at low loads of the form F = S(c)A, where S(c) is the critical shear stress. A recent model for the contact mechanics of a compliant elastic film confined between stiffer substrates was applied to the data obtained in dry N2. Using this approach, we obtained interfacial energies of the compliant monolayers in good agreement with van der Waals-Lifshitz theory. With a low monolayer elastic modulus of E'(1)=0.2 GPa, we obtained a slightly higher value of Sc for stearic acid than that established for more close-packed stearic acid monolayers. An increase of mu and S(c) was found with increasing degree of unsaturation of the fatty acid.     

On pattern transfer in replica molding

Nano- and micromolding of elastic materials produces smoothed replicas of the mold structures. This limits the technique's resolution. Here we identified surface tension as the cause of smoothing and derived explicit equations for calculating molded feature shapes. The characteristic length scale for smoothing is given by the ratio of the interface tension to Young's modulus of the molded material. This approach offers the possibility to correct for the smoothing caused by surface tension during mold design. Moreover, it can be exploited to measure interface tension.     

Evaluation of ionization techniques for mass spectrometric detection of contact allergenic hydroperoxides formed by autoxidation of fragrance terpenes

Hydroperoxides formed by autoxidation of common fragrance terpenes are strong allergens and known to cause allergic contact dermatitis (ACD), a common skin disease caused by low molecular weight chemicals. Until now, no suitable methods for chemical analyses of monoterpene hydroperoxides have been available. Their thermolability prohibits the use of gas chromatography and their low UV-absorption properties do not promote sensitive analytical methods by liquid chromatography based on UV detection. In our study, we have investigated different liquid chromatography/mass spectrometry (LC/MS) ionization techniques, electrospray ionization (ESI), atmospheric pressure chemical ionization (APCI), and atmospheric pressure photoionization (APPI), for detection of hydroperoxides from linalool and limonene.Flow injection analysis was used to evaluate the three different techniques to ionize the monoterpene hydroperoxides, linalool hydroperoxide and limonene hydroperoxide, by estimating the signal efficacy under experimental conditions for positive and negative ionization modes. The intensities for the species [M+H]+ and [M+H-H2O]+ in positive ionization mode and [M-H]- and [M-H-H2O]- in negative ionization mode were monitored. It was demonstrated that the mobile phase composition and instrumental parameters have major influences on the ionization efficiency of these compounds. ESI and APCI were both found to be appropriate as ionization techniques for detection of the two hydroperoxides. However, APPI was less suitable as ionization technique for the investigated hydroperoxides.     

Economic evaluation of isolation of hemicelluloses from process streams from thermomechanical pulping of spruce

Hemicelluloses, which are abundant in nature and have potential use in a wide variety of applications, may make an important contribution in helping relieve society of its dependence on petrochemicals. However, cost-efficient methods for the isolation of hemicelluloses are required. This article presents an economic evaluation of a full-scale process to isolate hemicelluloses from process water from a thermomechanical pulp mill. Experimental data obtained in laboratory scale were used for the scale up of the process by computer simulation. The isolation method consisted of two process steps. The suspended matter in the process water was removed by microfiltration and thereafter the hemicelluloses were concentrated by ultrafiltration, and at the same time, separated from smaller molecules and ions in the process water. The isolated hemicelluloses were intended for the production of oxygen barriers for food packaging, an application for which they have been shown to have suitable properties. The solution produced contained 30 g hemicelluloses/L with a purity (defined as the ratio between the hemicelluloses and the total solids) of approx 80%. The evaluation was performed for a plant with a daily production of 4 metric tonnes (t) of hemicelluloses, which is the estimated future need of barrier films at Tetra Pak (Lund, Sweden). The production cost was calculated to be 670 euros/t of hemicelluloses. This is approx 9 times lower than the price of ethylene vinyl alcohol, which is produced by petrochemicals and is currently used as an oxygen barrier in fiber-based packaging materials. This indicates that it is possible to produce oxygen barriers made of hemicelluloses at a price that is competitive with the materials used today.     

Inequalities and properties of some generalized Orlicz classes and spaces

We discuss and complement the knowledge about generalized Orlicz classes $ \tilde X_\Phi $ and Orlicz spaces X _Φ obtained by replacing the space L ¹ in the classical construction by an arbitrary Banach function space X. Our main aim is to focus on the task to study inequalities in such spaces. We prove a number of new inequalities and also natural generalizations of some classical ones (e.g., Minkowski’s, Hölder’s and Young’s inequalities). Moreover, a number of other basic facts for further study of inequalities and function spaces are included.     

Influence of pH and counteranion on the structure of tropolonato-lead(II) complexes: structural and infrared characterization of formed lead compounds

Reactions of tropolone with lead(II) trifluoromethanesulfonate, perchlorate, and nitrate in water/methanol mixtures at pH below 1.0 lead to the formation of three different polymeric lead(II) complexes, [Pb(trop)(CF3SO3)(H2O)]n (1), [Pb3(trop)4(ClO4)2]n (2), and [Pb2(trop)2(NO3)2(CH3OH)]n (3), respectively. On the other hand, if the reactions are performed at pH above 2.0, the dimeric compound [Pb(trop)2]2 (4) is obtained independently of the lead(II) salt used, as long as lead(II) does not form any strong complexes with the counterion. The crystal structures of these compounds have been determined by single-crystal X-ray diffraction. The structure of solid tetrakis(tropolonato)lead(IV), Pb(trop)4 (5), has been studied by means of the EXAFS technique because it was not possible to obtain sufficiently large single crystals. In the polymeric structures, the counterions are coordinated to the lead(II) ions and act as bridges. The tropolonato ligand behaves as a chelating agent and a tri- or tetraconnective bridge. The total coordination number of the lead(II) ion is five in compound 4, seven in 1 and 3, and eight in 2, and the lead(IV) ion in 5 is eight-coordinated. The 6s2 lone electron pair on the lead(II) ion seems to be stereochemically active in all lead(II) complexes studied. All compounds have been characterized by IR spectroscopy as well.     

Synthesis and electron transfer studies of ruthenium-terpyridine-based dyads attached to nanostructured TiO2

A series of bis(terpyridine)RuII complexes have been prepared, where one of the terpyridines is functionalized in the 4'-position by a phosphonic or carboxylic acid group for attachment to TiO2. The other is functionalized, also in the 4'-position, by a potential electron donor. In complexes 1a, 3a, and 4a,b, this donor is tyrosine or hydrogen-bonded tyrosine, while in 2a it is carotenoic amide. The synthesis and photophysical properties of the complexes are discussed. On irradiation with visible light, the formation of a long-lived charge-separated state was anticipated, via primary electron ejection into the TiO2, followed by secondary electron transfer from the donor to the photogenerated RuIII. However, such a charge-separated state could be observed with certainty only with complex 2a. To explain the result, quantum chemical calculations were performed on the different types of complexes.     

Interactions between benzyl benzoate and single- and double-chain quaternary ammonium surfactants

Interactions between benzyl benzoate and two different twin-tailed cationic surfactants have been studied. NMR diffusometry measurements have shown that cationic micelles grow in one dimension when benzyl benzoate is added. The location of benzyl benzoate in the micelles was evaluated by NOESY, showing that benzyl benzoate gave cross-peaks both to the hydrophobic groups in the surfactant and to the surfactant head group. Additions of benzyl benzoate to a lamellar phase of double-tailed quaternary surfactants revealed differences in responses. With an increasing concentration of benzyl benzoate, the structure of the dialkyl quat aggregate goes from lamellar to cubic, while the dialkyl ester quat forms a lamellar structure for all benzyl benzoate concentrations.     

In silico prediction of drug solubility: 2. Free energy of solvation in pure melts

The solubility of drugs in water is investigated in a series of papers and in the current work. The free energy of solvation, DeltaG*(vl), of a drug molecule in its pure drug melt at 673.15 K (400 degrees C) has been obtained for 46 drug molecules using the free energy perturbation method. The simulations were performed in two steps where first the Coulomb and then the Lennard-Jones interactions were scaled down from full to no interaction. The results have been interpreted using a theory assuming that DeltaG*(vl) = DeltaG(cav) + E(LJ) + E(C)/2 where the free energy of cavity formation, DeltaG(cav), in these pure drug systems was obtained using hard body theories, and E(LJ) and E(C) are the Lennard-Jones and Coulomb interaction energies, respectively, of one molecule with the other ones. Since the main parameter in hard body theories is the volume fraction, an equation of state approach was used to estimate the molecular volume. Promising results were obtained using a theory for hard oblates, in which the oblate axial ratio was calculated from the molecular surface area and volume obtained from simulations. The Coulomb term, E(C)/2, is half of the Coulomb energy in accord with linear response, which showed good agreement with our simulation results. In comparison with our previous results on free energy of hydration, the Coulomb interactions in pure drug systems are weaker, and the van der Waals interactions play a more important role.