Regio- and Enantioselective Substitution of Acyclic Allylic Sulfoximines with Butylcopper in the Presence of Lithium Iodide and Boron Trifluoride

Enantiomerically pure N-methyl-, N-benzyl-, and N-(methoxyethyl)-S-(phenyl)cinnamylsulfoximines as well as the corresponding crotylsulfoximines have been prepared from N-methyl-, N-benzyl-, and N-(methoxyethyl)-S-(lithiomethyl)sulfoximines and carbonyl compounds by an addition-elimination-isomerization reaction sequence. Under basic conditions, complete isomerization of the vinylic sulfoximines, obtained as intermediates, to the corresponding allylic sulfoximines takes place. Chromatographically separable mixtures of (E) and (Z) allylic sulfoximines were isolated in the case of beta,gamma-disubstituted allylic sulfoximines. The (E/Z) ratio depends on the nature of the substituents in the beta- and gamma-positions, and the equilibrium amount of the (Z) isomer varies from 68% to nil. The allylic N-methylsulfoximines do not racemize thermally, and their rearrangement to the corresponding allylic sulfinamides is negligible. Upon prolonged treatment with boron trifluoride at low temperatures allylic N-methylsulfoximines are recovered unchanged. The crystal structure of S-(3,4-dihydronaphthalen-2-ylmethyl)-N-methyl-S-phenylsulfoximine was determined. Reaction of the allylic sulfoximines with butylcopper in the presence of lithium iodide and boron trifluoride leads with very high gamma-selectivities and moderate to high enantioselectivities to the corresponding chiral alkenes. Their configuration was determined by chemical correlation through ozonolysis to the corresponding carbonyl compounds. The asymmetric induction exerted by the chiral N-methyl-S-phenylsulfoximine group strongly depends on the double bond configuration and the substituents in the beta- and gamma-positions. The (E) allylic sulfoximines are substituted with low to moderate enantioselectivities (2-66%), whereas the (Z) allylic sulfoximines react with much higher enantioselectivities (69-92%). Interestingly, substitution of the beta-methyl-gamma-phenyl-substituted (Z) allylic sulfoximine and its beta-phenyl-gamma-methyl isomer proceeded with almost the same degree of asymmetric induction but with the opposite sense. Replacement of the N-methyl group by a benzyl or a methoxyethyl group has no significant influence on the regio- and enantioselectivity of the substitution.     

Bimetallic complexes from amphoteric group 13/15 ligands: syntheses and X-ray crystal structures

Bimetallic, pentel-bridged complexes of the type [(dmap)Me2M-E(SiMe3)2-M'(CO)n] (M=Al, Ga; E=P, As, Sb; M'=Cr, Fe, Ni; DMAP=4-(dimethylamino)pyridine) are formed by reactions of DMAP-coordinated monomeric Group 13/15 compounds [(dmap)Me2M-E(SiMe3)2] with the transition metal complexes [(Me3N)Cr(CO)5], [Fe3(CO)12], and [Ni(CO)4]. For the first time, this reaction offers a general pathway to compounds containing a Group 13 metal and a transition metal bridged by a pentel atom. Complexes prepared in this way were characterized by IR and multinuclear NMR spectroscopy and by single-crystal X-ray structure analysis. Their electronic and structural properties are discussed in detail. The Group 13/15 ligands are very weak acceptors, which is likely to be due to the electropositive Group 13 metal, and the complexes feature comparatively long pentel-transition metal bonds. In addition, the synthesis and structural characterization of the parent DMAP-coordinated gallanes [(dmap)Me2Ga-E(SiMe3)2] (E=P, As) are reported.     

Determination of carbonyl compounds in exhaust gas by using a modified DNPH-method

The determination of carbonyl compounds in gaseous samples is usually accomplished by enrichment methods, in which 2,4-dinitrophenyl-hydrazine (DNPH) as a derivatization reagent has become established to a large extent. However, the conventional methods of DNPH-impingers and of DNPH-cartridges are applicable to emission measurements in a limited way only, depending on the NO₂-concentration in the exhaust gas. It could be proved that DNPH-derivatives, as well as DNPH, are also decomposed by NO₂ at a different speed, in which the hydrazones of unsaturated carbonyl compounds are probably more sensitive than those of the saturated carbonyl compounds. In view of this fact, the collecting methods had to be modified to avoid losses with the enrichment. The analysis of the compounds is carried out by HPLC with an effective gradient-system which is able to separate and detect the carbonyl compounds in exhaust gas within 16 min. Furthermore, a simple working-up procedure is presented which facilitates a parallel analysis by GC.     

Nickel-Catalyzed Preparations of Functionalized Organozincs

The reaction of primary alkyl bromides or chlorides with diethylzinc in the presence of Ni(acac)(2) (5 mol %) furnishes the corresponding alkylzinc halides (X = Br, Cl) via a halogen-zinc exchange reaction. The treatment of terminal alkenes with diethylzinc (neat, 25-60 degrees C) in the presence of Ni(acac)(2) as a catalyst (1-5 mol %) and 1,5-cyclooctadiene (COD) affords the corresponding dialkylzincs via a hydrozincation reaction. Whereas the conversion for simple alkenes bearing a remote functionality reaches 40 to 63%, the hydrozincation of allylic, homoallylic alcohols and allylic amines proceeds very efficiently (85-95% conversion). All the zinc organometallics obtained react with various electrophiles (allylic halides, enones, acid chlorides, alkynyl halides, ethyl propiolate) after transmetalation with CuCN.2LiCl. In the presence of the chiral catalyst 12, the dialkylzincs prepared add to aldehydes with high enantioselectivity.     

Synthesis and auration of primary and di-primary heteroaryl-phosphines

Convenient high-yield syntheses of the primary and di-primary heteroaryl-phosphines R-PH2 and H2P-R'-PH2(with R = 2-thienyl, 2-furyl, and R'= 2,5-thiophenediyl, 2,5-furandiyl, respectively) are presented. The products and a set of precursor molecules have been characterized by analytical and spectral data, and the crystal structures of selected molecules have been determined: 2-C4H3O-PCl2, 2,5-(Cl2P)2C4H2O, 2,5-[(Et2N)2P]2C4H2E (with E = O, S). In the crystals, the two molecules with -PCl2 substituents adopt trans conformations, while the other two have the -P(NEt2)2 groups rotated into a twist conformation. The reaction of the thienyl compounds with tris[(tert-phosphine)gold]oxonium tetrafluoroborates gave almost quantitative yields of the tri- and hexanuclear gold complexes, respectively: {2-C4H3S-P[Au(PR3)]3}+BF4- and [2,5-{[(R3P)Au]3P}2C4H2S]2+(BF4(-)2, (R =tBu, Ph). The structures of the compounds with R3P =tBu3P ligands have been determined. In both cases the [2-C4H3/2S-P] units cap triangles of gold atoms in an array that can be described as three [Au(PR3)]+ cations bridged by a phosphido dianion (RP)2-.     

Screening an In-House Isoquinoline Alkaloids Library for New Blockers of Voltage-Gated Na+ Channels Using Voltage Sensor Fluorescent Probes: Hits and Biases

Voltage-gated Na⁺ (Na_V) channels are significant therapeutic targets for the treatment of cardiac and neurological disorders, thus promoting the search for novel Na_V channel ligands. With the objective of discovering new blockers of Na_V channel ligands, we screened an In-House vegetal alkaloid library using fluorescence cell-based assays. We screened 62 isoquinoline alkaloids (IA) for their ability to decrease the FRET signal of voltage sensor probes (VSP), which were induced by the activation of Na_V channels with batrachotoxin (BTX) in GH3b6 cells. This led to the selection of five IA: liriodenine, oxostephanine, thalmiculine, protopine, and bebeerine, inhibiting the BTX-induced VSP signal with micromolar IC₅₀. These five alkaloids were then assayed using the Na⁺ fluorescent probe ANG-2 and the patch-clamp technique. Only oxostephanine and liriodenine were able to inhibit the BTX-induced ANG-2 signal in HEK293-hNa_V1.3 cells. Indeed, liriodenine and oxostephanine decreased the effects of BTX on Na⁺ currents elicited by the hNa_V1.3 channel, suggesting that conformation change induced by BTX binding could induce a bias in fluorescent assays. However, among the five IA selected in the VSP assay, only bebeerine exhibited strong inhibitory effects against Na⁺ currents elicited by the hNav1.2 and hNav1.6 channels, with IC₅₀ values below 10 µM. So far, bebeerine is the first BBIQ to have been reported to block Na_V channels, with promising therapeutical applications.     

Liquid Metal Superelastic Fiber Mat Enabling Highly Permeable Wearable Electronics Toward Comfortable e-Skins

Low water vapor and air permeability is a persistent challenge in wearable and on-skin electronics, as it reduces wearing comfort, and leads to skin irritation and inflammation in the long term. To tackle this issue, Zheng and coworkers designed a stretchable conductor based on an elastomeric fiber mat coated by liquid metal. After simple activation via stretching, the flexible conductor was endowed with excellent permeability, good stretchability, exceptional electrical stability, and good biocompatibility, ascribed to the mesh-like structure and the vertically buckled structure of the liquid metal. Based on the intriguing properties of the material, it was employed in a multi-functional wearable device, able to detect the heartbeat and sweat while serving as a heating device. The corresponding research has been published in Nature Materials and can be accessed at https://doi.org/10.1038/s41563-020-00902-3.     

How the Physicochemical Properties of the Bulk Material Affect the Ablation Crater Profile,Mass Balance,and Bubble Dynamics During Single-Pulse,Nanosecond Laser Ablation in Water

Understanding the key steps that drive the laser-based synthesis of colloids is a prerequisite for learning how to optimize the ablation process in terms of nanoparticle output and functional design of the nanomaterials. Even though many studies focus on cavitation bubble formation using single-pulse ablation conditions, the ablation efficiency and nanoparticle properties are typically investigated under prolonged ablation conditions with repetition rate lasers. Linking single-pulse and multiple-pulse ablation is difficult due to limitations induced by gas formation cross-effects, which occur on longer timescales and depend on the target materials’ oxidation-sensitivity. Therefore, this study investigates the ablation and cavitation bubble dynamics under nanosecond, single laser pulse conditions for six different bulk materials (Au, Ag, Cu, Fe, Ti, and Al). Also, the effective threshold fluences, ablation volumes, and penetration depths are quantified for these materials. The thermal and chemical properties of the corresponding bulk materials not only favor the formation of larger spot sizes but also lead to the highest molar ablation efficiencies for low melting materials such as aluminum. Furthermore, the concept of the cavitation bubble growth linked with the oxidation sensitivity of the ablated material is discussed. With this, evidence is provided that intensive chemical reactions occurring during the very early timescale of ablation are significantly enhanced by the bubble collapse.     

Approximate Atomic Green Functions

In atomic and many-particle physics, Green functions often occur as propagators to formally represent the (integration over the) complete spectrum of the underlying Hamiltonian. However, while these functions are very crucial to describing many second- and higher-order perturbation processes, they have hardly been considered and classified for complex atoms. Here, we show how relativistic (many-electron) Green functions can be approximated and systematically improved for few- and many-electron atoms and ions. The representation of these functions is based on classes of virtual excitations, or so-called excitation schemes, with regard to given bound-state reference configurations, and by applying a multi-configuration Dirac-Hartree-Fock expansion of all atomic states involved. A first implementation of these approximate Green functions has been realized in the framework of Jac, the Jena Atomic Calculator, and will facilitate the study of various multi-photon and/or multiple electron (emission) processes.