Online re-optimization of optical filters on a production sputter tool

This contribution presents a magnetron sputter deposition tool with broadband optical monitor and online re-optimization capability for high volume production. The layer termination relies on a comparison of the actually measured reflection spectrum with a pre-calculated target spectrum. Spectra recorded after each deposited layer are analyzed by the re-optimization module and in case of significant deviations layer thicknesses and target spectra for the remaining layers are recalculated. This technique significantly improves the performance and reproducibility in case of highly denlanding coating designs and is able to correct abnormal production errors in individual layers, which will lead to coating failure without re- optimization.     

Modeling and numerical approximations for bubbles in liquid metal

In simulations of liquid metals, various model approximations, each of which justified by experimental results lead to a simplified two-phase flow problem. This paper discusses numerical justifications for these approaches and provides quantitative results for a single rising bubble as a benchmark. Representing a bubble as a rigid object is shown to be valid for low Eötvös numbers in contaminated systems. Qualitative differences can be observed for larger Eötvös numbers. Further simulations are undertaken with different ratios of inner and outer viscosity. The benchmark problem considered may also be interesting for more general applications.     

Synthesis and Properties of Isobicyclo‐DNA

We present the synthesis of the isobicyclo‐DNA building blocks with the nucleobases A, C, G and T, as well as biophysical and biological properties of oligonucleotides derived thereof. The synthesis of the sugar part was achieved in 5 steps starting from a known intermediate of the tricyclo‐DNA synthesis. Dodecamers containing single isobicyclo‐thymidine incorporations, fully modified A‐ and T‐containing sequences, and fully modified oligonucleotides containing all four bases were synthesized and characterized. Isobicyclo‐DNA forms stable duplexes with natural nucleic acids with a pronounced preference for DNA over RNA as complements. The most stable duplexes, however, arise by self‐pairing. Isobicyclo‐DNA forms preferentially B‐DNA‐like duplexes with DNA and A‐like duplexes with complementary RNA as determined by circular dichroism (CD) spectroscopy. Self‐paired duplexes show a yet unknown structure, as judged from CD spectroscopy. Biochemical tests revealed that isobicyclo‐DNA is stable in fetal bovine serum and does not elicit RNaseH activity.     

A regularization approach for damage models based on a displacement gradient

Common material models that take into account softening effects due to damage encounter the problem of ill-posed boundary value problems if no regularization is applied. This condition leads to a non-unique solution for the resulting algebraic system and a strong mesh dependence of the numerical results. A possible solution approach to prevent this problem is to apply regularization techniques that take into account the non-local behavior of the damage [1]. For this purpose a field function is used to couple the local damage parameter to a non-local level, in which differences between the local and non-local parameter as well as the gradient of the non-local parameter can be penalized. In contrast, we present a novel approach to regularization in which no field function is needed [2]. Hereto, the regularization is carried out by means of the divergence of the displacements and no additional quantity is necessary since the displacements are already defined on a non-local level. The idea is that with an increasing value of the damage the element's volume will increase as well. This is a result of the softening due to the occurring damage. The increasing volume can be measured by the divergence of the displacements which can be penalized by an additional energy part. The lack of any field function and the regularization by the use of the divergence of the displacements entails several numerical advantages: the computational effort is considerably reduced and the convergence behavior is improved as well. Naturally, the numerical results are mesh independent due to the regularization. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Application of a cohesive zone element for the prediction of damage in nano/micro coating

Many tools in production technology are nowadays coated to obtain a satisfactory lifetime and degradation resistance. Therefore, the main goal of this study is to investigate antiadhesive and wear resistant coatings made of ceramics, plastics and metals produced by High Power Pulsed Magnetron Sputtering (HPPMS) technique [1]. A cohesive zone element technique (CZ) is applied to model the interactions of the coatings and the substrate surfaces (see [2]). This goes along with the investigations of the delamination and failure behavior of the involved surfaces. To illustrate the applicability of the model, several structural simulations are performed. The developed CZ element model is capable of modeling the separation, the contact and also the irreversible reloading conditions in both normal and tangential directions [3]. The model is further developed to be applicable for different structures including different bonding behaviors, with a higher stability. The talk concludes with a detailed discussion of the numerical results of different material and interface properties. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Characterization of Ni/Al hybrid foam from atomic to microscale

In this paper, the Ni/Al hybrid open-cell foams are characterized on different hierarchical levels by means of experiments and numerical modeling from the atomic to the microscale. In this case, it is possible to compare the elastic-plastic behavior at different scales in order to attain a deeper understanding of the multiscale properties of the Ni/Al hybrid foams. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Engineered pixels using active plasmonic holograms with liquid crystals

Digital holography requires arrays of small reconfigurable elements to achieve complex reconstruction of the hologram with common systems based on pixels utilizing liquid crystal on silicon (LCoS) technology. The backplane of a typical pixel element is potentially underutilized and thus relatively large physical areas exist in which information can be stored and exploited to give additional functionality to pixel elements. Polarisation and wavelength dependent optical properties can be achieved in small areas using the plasmonic effects of optical antennae. The integration of LCs with optical antennae‐based plasmonic holograms allows active modulation of the far field pattern. The work here demonstrates the concept that conventional LCoS pixel elements can be greatly enhanced with the integration of plasmonic holograms, composed of optical antennae patterned on the surface, giving rise to new levels of modulation capability for holographic pixel elements. Using LCs, polarisation dependent effects in plasmonic holograms can be switched. ‘Engineered pixels', with sub‐wavelength multiplexing over both polarisation and wavelength, can increase the channel capacity of a typical LC display device. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Formation of H3+ in Collisions of H2+ with H2 Studied in a Guided Ion Beam Instrument

In order to study collisions between ions and neutrals, a new Guided Ion Beam (GIB) apparatus, called NOVion, has been assembled and tested. The primary purpose of this instrument is to measure absolute cross sections at energies relevant for technical or inter- and circumstellar plasmas. New and improved results are presented for forming H₃⁺ in collisions of H₂⁺ with H₂. Between 0.1 eV and 2 eV, our measured effective cross sections are in good overall agreement with most previous measurements. However, at higher energies, our results do not show the steep decline, recommended in the standard literature. After critical evaluation of all experimental and theoretical data, a new analytical function is proposed, describing properly the dependence of the title reaction on the collision energy up to 10 eV.