Performance of Thyme Oil@Na-Montmorillonite and Thyme Oil@Organo-Modified Montmorillonite Nanostructures on the Development of Melt-Extruded Poly-L-lactic Acid Antioxidant Active Packaging Films

Today, the use of natural biodegradable materials in the production processes is more and more adopted by industry to achieve cyclic economy targets and to improve environmental and human health indexes. Active packaging is the latest trend for food preservation. In this work, nanostructures were prepared by incorporation of thyme oil with natural natrium-montmorillonite and organo-montmorillonite with two different techniques, direct impregnation and the green evaporation–adsorption process. Such nanostructures were mixed with poly-L-lactic-acid for the first time via an extrusion molding process to develop a new packaging film. Comparisons of morphological, mechanical, and other basic properties for food packaging were carried out via XRD, FTIR, TG, SEM/EDS, oxygen and water vapor permeation, and antimicrobial and antioxidant activity for the first time. Results showed that poly-L-lactic-acid could be modified with clays and essential oils to produce improved active packaging films. The final product exhibits food odor prevention characteristics and shelf-life extension capabilities, and it could be used for active packaging. The films based on OrgMt clay seems to be more promising, while the thyme oil addition improves their behavior as active packaging. The PLLA/3%TO@OrgMt and PLLA/5%TO@OrgMt films were qualified between the tested samples as the most promising materials for this purpose.     

Monitoring the aggregation of single casein micelles using fluorescence microscopy

The aggregation of casein micelles (CMs) induced by milk-clotting enzymes is a process of fundamental importance in the dairy industry for cheese production; however, it is not well characterized on the nanoscale. Here we enabled the monitoring of the kinetics of aggregation between single CMs (30-600 nm in diameter) by immobilizing them on a glass substrate at low densities and subsequently imaging them with fluorescence microscopy. We validated the new method by a quantitative comparison to ensemble measurements of aggregation. Single-particle statistics allowed us to observe for the first time several heterogeneities in CM aggregation. We observed two types of CM growth: a slow increase in the size of CMs and a stepwise increase attributed to interactions between aggregates preformed in solution. Both types of growth exhibit a lag phase that was very heterogeneous between different CMs, suggesting significant differences in their composition or structure. Detailed size histograms of CMs during aggregation also revealed the presence of two distinct subpopulations with different growth amplitudes and kinetics. The dependence of these distinct nanoscale processes/parameters on aggregation conditions is not accessible to bulk measurements that report only ensemble-average values and may prove important to an in-depth understanding of CM aggregation.     

Electronuclear multiconfiguration time‐dependent hartree calculations on the confined H atom with mobile electron and nucleus

A multiconfiguration time‐dependent Hartree method oriented toward calculations of a non‐Born‐Oppenheimer nature has been applied to the calculation of the dynamical properties of a confined H atom. The calculation is fully six‐dimensional and does not take into account constraints arising from linear or angular momentum conservation. The orbital evolution is monitored and the energy level spectrum of the system, as well as the dependence of the results on the decomposition of the Hamiltonian and on the correlation between radial degrees of freedom, is determined. © 2012 Wiley Periodicals, Inc.     

Gold Nanoparticle Modified Screen Printed Electrodes for the Trace Sensing of Arsenic(III) in the Presence of Copper(II)

Gold ensembles for the trace level sensing of arsenic(III) in the presence of copper(II) are reported. The gold ensembles are fabricated using citrate capped gold nanoparticles which are chemically synthesised in an aqueous solution with an aliquot of this simply cast onto an economical and disposable screen printed electrode. After drying at room temperature, the gold ensembles are ready for use. The gold ensembles are explored towards the sensing of arsenic(III) in the presence of copper(II) using anodic stripping voltammetry where the corresponding stripping peaks are well resolved and using this protocol it is possible to readily detect 3 µg L^?1 (3 ppb) with a detection limit of 0.4 µg L^?1 (0.4 ppb). Proof‐of‐concept is also shown for the sensing of arsenic(III) in a canal water sample. Given the low cost of the sensor and ease of fabrication, the gold ensembles hold promise for the sensing of arsenic(III) in water samples where copper(II) may be present.     

Dendritic effects of crown ether-functionalized dendrimers on the solvent extraction of metal ions

The ability of a series of crown ether-functionalized dendrimers to function as alkali metal picrate extraction agents is assessed by liquid-liquid extraction and ¹H NMR titration experiments. Crown ether-functionalized dendrimers that contain Fréchet-type poly(benzyl ether) dendrons of different generation as building blocks display different extraction characteristics toward alkali metal cations. Positive and negative dendritic effects depending on the generation of the dendrimer are assigned in the complexation behaviour of the dendritic host compounds.     

Novel diblock copolymer‐grafted multiwalled carbon nanotubes via a combination of living and controlled/living surface polymerizations

Diels–Alder cycloaddition reactions were used to functionalize multiwalled carbon nanotubes (MWNTs) with 1‐benzocylcobutene‐1′‐phenylethylene (BCB‐PE) or 4‐hydroxyethylbenzocyclobutene (BCB‐EO). The covalent functionalization of the nanotubes with these initiator precursors was verified by FTIR and thermogravimetric analysis (TGA). After appropriate transformations/additions, the functionalized MWNTs were used for surface initiated anionic and ring opening polymerizations of ethylene oxide and ε‐caprolactone (ε‐CL), respectively. The OH‐end groups were transformed to isopropylbromide groups by reaction with 2‐bromoisobutyryl bromide, for subsequent atom transfer radical polymerization of styrene or 2‐dimethylaminoethyl methacrylate to afford the final diblock copolymers. ¹H NMR, differential scanning calorimetry (DSC), TGA, and transmission electron microscopy (TEM) were used for the characterization of the nanocomposite materials. TEM images showed the presence of a polymer layer around the MWNTs as well as the dissociation of MWNT bundles. Consequently, this general methodology, employing combinations of different polymerization techniques, increases the diversity of diblocks that can be grafted from MWNTs. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1104–1112, 2010     

Structural Characterization of Graphene Nanosheets for Miniaturization of Potentiometric Urea Lipid Film Based Biosensors

The present article describes a miniaturized potentiometric urea lipid film based biosensor on graphene nanosheets. Structural characterization of graphene nanosheets for miniaturization of potentiometric urea lipid film based biosensors have been studied through atomic force microscopy (AFM) and transmission electron microscopy (TEM) measurements. UV‐Vis and Fourrier transform IR (FTIR) spectroscopy have been utilized to study the pre‐ and postconjugated surfaces of graphene nanosheets. The presented potentiometric urea biosensor exhibits good reproducibility, reusability, selectivity, rapid response times (～4 s), long shelf life and high sensitivity of ca. 70 mV/decade over the urea logarithmic concentration range from 1×10^?6 M to 1×10^?3 M.     

Antioxidant activity of novel indole derivatives and protection of the myocardial damage in rabbits

Novel indole derivatives containing a triazole moiety (1a-d, 2a-c) were synthesized as lead compounds with interesting pharmacological profiles. Their antioxidant activity was investigated on in vitro non-enzymatic rat hepatic microsomal lipid peroxidation. All compounds showed significant effect in the above assay. The effect depended mainly on the attachment position of the triazole moiety on the indole nucleus. The most potent antioxidant derivatives la, 1c and 1d were tested for their protective ability against the oxidative damage of the myocardium after ischemia-reperfusion, in male rabbits which were subjected to 30 min regional ischemia followed by reperfusion. The tested antioxidant compounds 1a, 1c and 1d were continuously infused for 30 min starting at 10th min of ischemia and lasted at 10th min of reperfusion. The concentration of malondialdehyde (MDA, a marker of lipid peroxidation) and hemodynamic parameters (blood pressure and heart rate) were measured in the baseline, at 20th min of the sustained ischemia, 1st and 20th min of reperfusion. It was found that the examined compounds la, 1c and 1d reduced significantly the level of MDA in rabbits under ischemia-reperfusion and proved to be promising substances for further evaluation of anti-ischemic properties.