Quenching of Singlet Oxygen by a Carotenoid–Cyclodextrin Complex: The Importance of Aggregate Formation

The Girard's reagent P derivative of canthaxanthin ((GRP)₂-canthaxanthin), a dicationic carotenoid, forms a highly water-dispersible complex with (2-hydroxypropyl)-γ-cyclodextrin. The UV–visible light spectrum of the complex is consistent with some degree of aggregation, but the spectrum is independent of concentration from 7.5 to 750 μ m . Stern-Vomer plots for singlet-oxygen quenching by the complex are linear over a concentration range of 0–20 μ m . In the presence of 1 m m (2-hydroxypropyl)-γ-cyclodextrin, the singlet-oxygen quenching constant for the complex is 7.9 ± 0.9 × 10⁸  m ⁻¹s⁻¹. This is about an order of magnitude lower than the singlet-oxygen quenching constants for (GRP)₂-canthaxanthin in various organic solvents. The properties of the complex are also compared with the properties of (GRP)₂-canthaxanthin solubilized in neat water and in water containing various detergents. The singlet-oxygen quenching constant for (GRP)₂-canthaxanthin in micelles depends strongly on the specific detergent used, varying from 9.4 × 10⁸  m ⁻¹s⁻¹ for hexadecyltrimethylammonium bromide (CTAB) to 1.24 ± 0.4 × 10¹⁰  m ⁻¹s⁻¹ for sodium dodecyl sulfate. The small quenching constant in CTAB micelles correlates with spectroscopic evidence for aggregation of the (GRP)₂-canthaxanthin in this detergent.     

Shallow hydroxyapatite coatings pulsed laser deposited onto Al2O3 substrates with controlled porosity: correlation of morphological characteristics with in vitro testing results

We studied the influence of porous Al₂O₃ substrates on Ce-stabilized ZrO₂-doped hydroxyapatite thin films morphology pulsed laser deposited on their top. The porosities of substrates were monitored by changing sintering temperatures and measured with a high pressure Hg porosimeter.The depositions were conducted in 50 Pa water vapors by multipulse ablation of the targets with an UV KrF* (λ = 248 nm, τ ∼ 25 ns) excimer laser. The surface morphology of synthesized nanostructures was investigated by scanning electron microscopy and atomic force microcopy. Ca/P ratio within the range 1.67-1.70 was found for hydroxyapatite coatings by energy dispersive spectroscopy.The films were further seeded with mesenchymal stem cells for in vitro tests. The cells showed good attachment and spreading uniformly covering the entire surface of samples. The complexity of film morphology which is increasing with substrate porosity was shown to have a positive influence on cultivated cells density.     

Hierarchical superstructure of alkylamine-coated ZnS nanoparticle assemblies

We describe methodology for producing highly uniform, ordered and reproducible superstructures of surfactant-coated ZnS nanorod and nanowire assemblies, and propose a predictive multiscale "packing model" for superstructure formation based on electron microscopy and powder X-ray diffraction data on the superstructure, as well as on individual components of the nanostructured system. The studied nanoparticles showed a hierarchical structure starting from the individual faceted ZnS inorganic cores, onto which the crystalline surfactant molecules are adsorbed, to the superstructure of the nanoparticle arrays. Our results point out the critical role of the surfactant headgroup and polarity in nanoparticle assembly, and demonstrate the relationship between the molecular structure of the surfactant and the resulting superstructure of the nanoparticle assemblies.     

Structural requirements for efficient cellular photoprotection by carotenoid derivatives

We have synthesized five carotenoid derivatives: (1) Girard's reagent P (GRP)-retinal from GRP and retinal; (2) GRP-carotenal from GRP and beta-apo-8'-carotenal; (3) Girard's reagent T (GRT)-carotenal from GRT and beta-apo-8'-carotenal; (4) (GRP2-canthaxanthin from 2 mol of GRP and 1 mol of canthaxanthin; and (5) dansyl hydrazine (DH)-carotenal from DH and beta-apo-8'-carotenal. The first three derivatives are cations, whereas the fourth is a dication and the fifth is a weak base. Using K562 cells, we compared the subcellular distribution of the synthetic carotenoid derivatives with two uncharged natural carotenoids, beta-carotene and beta-apo-8'-carotenal. The two natural carotenoids were present mainly within the cell membranes. The synthetic carotenoid derivatives were more broadly distributed among the cell organelles. The positively charged derivatives had relatively high concentrations in mitochondria, whereas DH-carotenal had a relatively high concentration in lysosomes. We also measured the amount of photoprotection provided by the synthetic and natural carotenoids for K562 cells labeled with a photosensitizer (hypericin, protoporphyrin IX or cis-di[4-sulfonatophenyl]diphenylporphine). In this model system, only carotenoid derivatives with a permanent positive charge provided significant photoprotection. Neither the two natural carotenoids nor DH-carotenal were effective photoprotectors.     

Singlet-oxygen generation from A2E

Singlet-oxygen generation was measured in solutions containing equilibrium mixtures of the retinal lipofuscins, 2-[2, 6-dimethyl-8-(2,6,6-trimethyl-1-cyclohexen-1-yl)- 1E,3E,5E,7Eoctatetraenyl]-1-(2-hydroxyethyl)-4-[4-methyl-6(2,6,6-trimethyl-1-cyclohexen-1-yl)-1E,3E,5E-hexatrienyl]-pyridinium (A2E) and double bond isomer of A2E (iso-A2E), using steady-state irradiation and using cholesterol as a singlet-oxygen trap. The amount of singlet oxygen generated by equilibrium mixtures of A2E and iso-A2E was compared with that generated by tetraphenylporphine (TPP) under the same conditions. Studies were carried out in ethanol-d6, acetone-d6, 80% cyclohexane-d(12)-20% acetone-d6 (vol/vol) and hexafluorobenzene. Using 420 nm irradiation and assuming a singlet-oxygen quantum yield of 0.60 +/- 0.12 for TPP, the singlet-oxygen quantum yields were 0.8 +/- 0.3 x 10(-3), 1.2 +/- 0.4 x 10(-3), 2 +/- 1 x 10(-3) and 4 + 1 x 10(-3), respectively. In acetone-d6, the quantum yields were smaller at longer wavelengths, with values of 0.3 +/- 0.1 x 10(-3) and 0.4 +/- 0.2 x 10(-3) at 461 and 493 nm, respectively. Singlet-oxygen generation was greatest in solvents with the lowest dielectric constants. In view of the relatively small quantum yields, the contribution of singlet-oxygen generation to the phototoxic properties of A2E and of iso-A2E will require further study.     

Preferential cytotoxicity for multidrug-resistant K562 cells using the combination of a photosensitizer and a cyanine dye

The cyanine dye 1,1',3,3,3',3'-hexamethylindodicarbocyanine iodide (HIDC) protects K562 leukemia cells from photodynamic membrane damage caused by cis-di(4-sulfonatophenyl)diphenylporphine (TPPS2) and 420 nm light. This wavelength of light is chosen because it is absorbed by TPPS2, but not by HIDC. The photodynamic system studied may be useful as a model for antineoplastic therapy. A subline of K562 leukemia (K562/DOX), expressing the multidrug-resistance (MDR) phenotype, is found to accumulate smaller amounts of HIDC than the parent cell line and thus has less photoprotection. In the absence of added HIDC, the K562/DOX cell line is more resistant to photodynamic cytotoxicity than the K562 cell line. The resistance of the K562/DOX cell line is not due to a smaller accumulation of TPPS2 than the K562 cell line. However, when both cell lines are incubated with HIDC and TPPS2, and then exposed to light, the K562/DOX cell line becomes more sensitive to photodynamic cell damage than the K562 cell line. The combination of a photosensitizer with a cationic or lysomorphotropic photoprotector represents a novel strategy for the eradication of malignant cells expressing the MDR phenotype.     

Linear relations for efficiency calibration of γ-spectrometric measurements of bulk samples

The self-attenuation correction factor is used to relate the efficiency for a sample with a given matrix to the efficiency for an ideal sample with identical geometry but negligible photon attenuation. A certain linear relation for the efficiency for a given sample as a function of the efficiencies for a number of subsamples into which the original sample can be decomposed is established and experimentally validated. This relation can be used also in the case when the sample and the subsamples have different matrices. In this way the efficiency for volume samples with arbitrary compositions and densities can be constructed on the basis of the efficiencies (independently measured) for a number of basic geometries. Also a possibility to check the consistency of efficiency calibrations carried out with different standard sources (with different matrices) is provided.     

Characterization of the structural changes of human serum albumin upon interaction with single-walled and multi-walled carbon nanotubes: spectroscopic and molecular modeling approaches

Research on Chemical Intermediates - Through the incorporation of spectorescopic and molecular methods of modeling, the researchers investigated the interaction between Carbon Nanotubes (CNTs) and...     

Characterization of the physical–mechanical properties of dental resin composites reinforced with novel micro-nano hybrid silica particles: An optimization study

Abstract

In the study, dental composites of color A2 using Bis-GMA/UDMA/TEGDMA resins (ratios 70/10/20), and silica filler (70%wt, 75%wt, and 80%wt) which is a hybrid of two silica types in nano and micro dimensions were made using two different photoinitiators namely BAPO and camphorquinone. The optimum photoinitiator was selected based on the mechanical tests results after which the composites were subjected to the following tests: FTIR to evaluate polymerization degree, microhardness test, UTM, and SEM micrographs were taken to analyze the surface fracture of samples. The results of photoinitiator selection (flexural strength test) is 36.54?MPa, 37.62?MPa, and 75.08?MPa for BAPO?+?camphorquinone, camphorquinone, and BAPO respectively. The results show that the BAPO photoinitiator exhibits better results over camphorquinone and also BAPO/camphorquinone initiator systems. Then after choosing the photoinitiator system composites with different filler contents show higher mechanical strength than existing dental composites. The results of the mechanical tests for the composites with different filler contents synthesized after initiator system selection were significantly higher than the values specified in ISO 4049:2009 (102?MPa over 80?MPa). FTIR results indicate that the degree of conversion in these composite is 25.41%, 37.68, and 40.94% for composites with different filler amounts.     

Screen-printed electrodes modified with HRP-zirconium alcoxide film for the development of a biosensor for acetaminophen detection

The development of a biosensor based on the immobilization of horseradish peroxidase (HRP) within a zirconium alkoxide-polyetilenimine film onto screen-printed electrodes (SPE) for acetaminophen detection and acetaminophen quantification in pharmaceutical products is described. The biosensor operation mode is based on monitoring the amperometric signal produced by the electrochemical reduction of the enzymatically generated electroactive oxidized species of acetaminophen in the presence of hydrogen peroxide. The enzyme immobilization is performed by retention in a polyethylenimine-zirconium alcoxide porous gel film, a technique that offers good entrapping and a protective environment for the biocomponent due to the hydration properties of the immobilization layer. SPEs have the advantage of being easily mass-produced at low costs with superior characteristics in comparison with classical electrode materials. In this configuration, zirconium alkoxide demonstrates its electrocatalytic activity. The biosensor allows the quantification of acetaminophen with a limit of detection of 6.21×10^?8 M and a linear range between 4.35×10^?7 M and 4.98×10^?6 M. Finally, the biosensor is applied to the quantitative analysis of acetaminophen in Perdolan® tablets.

Open image in new window