Synergic effect in electrical conductivity using a combination of two fillers in PVDF hybrids composites

The objective of this work was to prepare novel conductive blends of poly(vinylidene fluoride) (PVDF) with polypyrrole (PPy) and to compare their performance with PVDF/multiwall carbon nanotube (MWCNT) composites and novel PVDF/PPy/MWCNT hybrid systems. All the compositions were prepared by melt mixing using a miniature mixer. The mixtures were characterized by Fourier transformed infrared (FTIR), wide angle X-ray diffraction (WAXD), thermogravimetric analyses (TGA), scanning and transmission electron microscopy (SEM and TEM, respectively) and volume electrical resistivity. For the binary PVDF/PPy and PVDF/MWCNT systems, percolation thresholds of 10 and 0.3 wt%, respectively, were found. In the hybrid systems, however, the percolation threshold for each filler was lower than in the binary systems, but the electrical conductivities were always much higher at all concentrations than the conductivities of the binary systems. Therefore, the addition of both fillers had a synergistic effect on the hybrid system conductivity, which was attributed to its morphology: the PPy increased the homogeneity of the MWCNT distribution and decreased the available free volume for the MWCNT; as a result the MWCNT rolled around the PPy particles bridging them through the PVDF matrix, increasing the quantum tunneling effect and thus, the electrical conductivity of the system.     

Tailoring the morphology and properties of waterborne polyurethanes by the procedure of cellulose nanocrystal incorporation

Polyurethane waterborne synthesis was performed using a two-step method, commonly referred to as a prepolymer method. Nanocomposites based on waterborne polyurethane and cellulose nanocrystals were prepared by the prepolymer method by altering the mode and step in which the nanofillers were incorporated during the polyurethane formation. The morphology, structural, thermal, and mechanical properties of the resulting nanocomposite films were evaluated by Fourier transform infrared spectroscopy (FTIR), small angle X-ray scattering (SAXS), scanning electron microscopy (SEM), and tensile tests. FTIR results indicated that the degree of interaction between the nanofillers and the WPU through hydrogen bonds could be controlled by the method of cellulose nanocrystal incorporation. Data obtained from SAXS experiments showed that the cellulose nanocrystals as well as the step of the reaction in which they are added influenced the morphology of the polyurethane. The reinforcing effect of CNCs on the nanocomposites depends on their morphology.     

Single-drop microextraction for the determination of manganese in seafood and water samples

We describe a method for single drop microextraction of manganese from fish, mollusk, and from natural waters using the reagent 1-(2-pyridylazo)-2-naphthol as the complexing agent and chloroform as the fluid extractor. After extraction, the analyte was directly submitted to graphite furnace electrothermal atomic absorption spectrometry. Once optimized, the method has a detection limit of 30 ng L^?1, a limit of quantification of 100 ng L^?1, and an enrichment factor of 16. Its accuracy was verified by applying the procedure to the following certified reference materials: apple leaves, spinach leaves, bovine liver, and mussel tissue. The procedure was also successfully applied to the determination of manganese in seafood and natural waters.

Phosphine-Free Suzuki Cross-Coupling Reaction Using an Efficient and Reusable Pd Catalyst in an Aqueous Medium Under Microwave Irradiation

Abstract

We report here an improved, highly efficient, and general method for the ligand-free Suzuki cross-coupling reaction to the synthesis of biaryls, bipyridyls, thienylpyridine, and allylphenols. Microwave irradiation of (het)aryl halides and (hetaryl, allyl)arylboronic acid N-methyl-iminodiacetic acid (MIDA) ester, using polyurea microencapsulated palladium catalyst (Pd EnCat 30), gave the coupling adducts 1a–x in excellent yields in just 10–18 min.     

An unexpected formation of pyrazolopyrimidines during the attempted to obtain 5-substituted tetrazoles from carbonitriles

In this Letter, we described the synthesis of new 5-(5-amino-1-aryl-1H-pyrazole-4-yl)-1H-tetrazoles 2a–c from 5-amino-1-aryl-1H-pyrazole-4-carbonitriles 1a–c as well as the unexpected 1H-pyrazolo[3,4-d]pyrimidine derivatives 6a–c from 5-amino-1-aryl-3-methyl-1H-pyrazole-4-carbonitriles 4a–c, instead of 5-(5-amino-1-aryl-3-methyl-1H-pyrazole-4-yl)-1H-tetrazoles 5a–c as desired. In an attempt to obtain these tetrazole derivatives containing the methyl group at C3-position in the pyrazole ring, the amino group in 5-amino-1-(4-methoxyphenyl)-3-methyl-1H-pyrazole-4-carbonitrile 4c was protected by the reaction with sodium hydride and di-tert-butyl-dicarbonate (Boc). The tetrazole derivative 5c was synthesized from the protected compound 7c using analogue methodology to obtain 2a–c and 6a–c.     

Thermal and photochemical effects on the structure,morphology, thermal and optical properties of PVA/Ni0.04Zn0.96O and PVA/Fe0.03Zn0.97O nanocomposite films

Ni_0.04Zn_0.96O and Fe_0.03Zn_0.97O with average diameter of 23 and 19 nm, respectively, have been synthesized by a modified sol–gel method to be used in the preparation of (100 − x)/x poly(vinyl alcohol)/oxide nanocomposite films, with x = 0, 1, 3 and 5 (in wt.%). A 125 W-Hg vapor lamp with emission above 254 nmwas used to irradiate PVA/Ni_0.04Zn_0.96O and PVA/Fe_0.03Zn_0.97O films. The effect on their structural, thermal, morphological and optical properties was studied by TG, DSC, DRX, AFM, UV–vis and PL spectrophotometry. The Ni_0.04Zn_0.96O addition on PVA films decreases the thermal stability of the polymer in inert and in oxidative atmosphere. In contrast, the Fe_0.03Zn_0.97O presence in the PVA films seems to increase the thermal stability of the polymer. The characteristic peak of the crystalline phase of PVA and wurtzite phase of the zinc oxide were identified through X-ray diffraction in both films. The crystallinity of the PVA film increases with UV irradiation and with the presence of Ni_0.04Zn_0.96O and Fe_0.03Zn_0.97O. The roughness of the PVA film was not modified by the addition of the doped oxides; however, it increases after UV irradiation, more significantly in the films containing the oxides. The PVA film exhibits absorption around 280 nm characteristic of π–π^∗ transitions related to carbonyl groups from residuals acetate, while the 95/05 PVA/Ni_0.04Zn_0.96O and 95/05 PVA/Fe_0.03Zn_0.97O nanocomposite films show absorption at the visible region which is characteristics of the band gap reduction of the doped oxides. The photoluminescence of PVA was modified by the presence of the oxides in the film. These nanocomposite films are interesting due to their thermal, mechanical (flexible) properties and low cost of production. In addition they are also able to exhibit peculiar optical properties showing potential to be used in photonic devices, gas sensors and organic solar cell applications.     

Affinity Matrices of Cratylia mollis Seed Lectins for Isolation of Glycoproteins from Complex Protein Mixtures

This work reports the use of matrices containing Cratylia mollis lectins (Cramoll 1,2,3-Sepharose and Cramoll 3-Sepharose) for isolation of glycoproteins from fetal bovine serum, human colostrum, hen egg white, and human blood plasma. Cramoll 1,2,3-Sepharose was able to bind a glycoprotein from fetal bovine serum which showed the same fetuin electrophoretic profile. The data indicate that this protein adsorbed to the matrix by interaction with Cramoll 3. Cramoll 1,2,3-Sepharose was not efficient to retain glycoproteins from human colostrum or commercial ovalbumin. Cramoll 3-Sepharose bound ovalbumin, and the support retained protein from hen egg white. Protein peaks eluted from the column with 1.0 M NaCl or 0.3 M galactose showed apparent molecular mass of ovalbumin. Two main proteins from blood plasma with apparent molecular mass 67 (similar to albumin) and 50 kDa (similar to fetuin) adsorbed on Cramoll 3-Sepharose and were eluted with 1.0 M NaCl as a single peak. Elution of adsorbed plasma proteins with 0.3 M galactose was less selective than with 1.0 M NaCl as revealed by SDS-PAGE. In conclusion, the Cramoll 1,2,3-Sepharose and Cramoll 3-Sepharose matrices were useful to separate glycoproteins from complex protein mixtures, and the adsorption phenomena was a carbohydrate-dependent event.     

Antioxidant, Anti-inflammatory, and Hypoglycemic Effects of the Leaf Extract from Passiflora nitida Kunth

Diabetes mellitus is a metabolic disease characterized by abnormally high plasma glucose levels, leading to major complications, such as insulin resistance, obesity, hyperlipidemia, and hypertension, also with alterations in the immune and neuronal systems. Brazilian plants have been studied as important sources for new molecules with medicinal properties. The genus Passiflora known as “Maracujá” has been used as a traditional folk medicine for a long time, so an investigation was performed regarding an endemic kind of passion fruit (Passiflora nitida Kunth) from Amazonas, Brazil. Here, we aimed to determine its potential biological activity against metabolic syndrome, oxidative stress, pain, and inflammation. The hydroethanol leaf extract revealed an in vitro α-glucosidase inhibitory activity of 50 % inhibitory concentration (IC₅₀)?=?6.78?±?0.31 μg/mL and an α-amylase inhibition of IC₅₀?=?93.36?±?4.37. In vivo, experiments of different saccharide tolerance resulted in significant glycemia control and, with alloxan-diabetic mice, resulted in a decrease of total cholesterol, a hypoglycemic effect, and an antioxidant activity by thiobarbituric acid-reactive substances measurement. Also, it decreased the carrageenan-induced edema volume and the rate of writhing as a nociceptive response. These results indicate positive effects of P. nitida extract and its potential to inhibit metabolic syndrome.     

Evaluation of Pesticide Contamination of Ground Water in Two Agricultural Areas of Portugal

In two Portuguese agricultural areas, "Beira Litoral" and "Ribatejo e Oeste", several pesticides regularly applied in vineyards, maize, potato, tomato for industry, apple, pear and rice were detected in ground water. Atrazine was the most frequently detected, being found in 70% of the total of 79 sites selected in the year 2000, followed by its metabolites desethylatrazine and desisopropylatrazine with frequencies of detection, respectively, of 56% and 48% and by simazine (37%), alachlor (25%), metolachlor (24%) and metribuzin (15%). Other pesticides and metabolites i.e. 3,4-dichloroaniline, dimethoate, f and g -endosulfan, lindane, molinate and prometryn were also detected but at lower occurrences. Pesticides were detected mainly in ground water wells used for irrigation purposes, although in some locations they were also found in water wells used for human consumption. In this study, it was also observed a seasonal variation of pesticide residues in ground water of shallow and deep wells.     

The role of nanocellulose fibers, starch and chitosan on multipolysaccharide based films

Thin nanocomposite films of thermoplastic starch, chitosan and cellulose nanofibers (bacterial cellulose or nanofibrillated cellulose) were prepared for the first time by solvent casting of water based suspensions of the three polysaccharides. The role of the different bioploymers on the final properties (thermal stability, transparency, mechanical performance and antimicrobial activity) of the films was related with their intrinsic features, contents and synergic effects resulting from the establishment of interactions between them. Thermoplastic starch displays an important role on the thermal stability of the films because it is the most stable polysaccharide; however it has a negative impact on the mechanical performance and transparency of the films. The addition of chitosan improves considerably the transparency (up to 50 % transmittance for 50 % of chitosan, in respect to the amount of starch), mechanical performance and antimicrobial properties (at least 25 % of chitosan and no more than 10 % of cellulose nanofibers are required to observe bacteriostatic or bactericidal activity) but decrease their thermal stability. The incorporation of cellulose nanofibers had the strongest positive impact on the mechanical properties of the materials (increments of up to 15 and 30 MPa on the Young′s modulus and Tensile strength, respectively, for films with 20 % of BC or NFC). Nonetheless, the impact in thermal stability and mechanical performance of the films, promoted by the addition of chitosan and cellulose nanofibres, respectively, was higher than the expected considering their percentage contents certainly because of the establishment of strong and complex interactions between the three polysaccharides.