Determination of gaseous and particulate carbonyls in air by gradient-elution micellar electrokinetic capillary chromatography

A new continuous-flow gradient-elution micellar electrokinetic capillary chromatography method is developed for the determination of airborne carbonyls after derivatization with 2,4-dinitrophenylhydrazine. A total of 16 carbonyls can be determined with detection limits ranging from 0.94 to 8.50 mg/L, working range from 4.72 to 346 mg/L, and repeatabilities (relative standard deviation, n=5) from 1.23 to 4.6% or 3.93 to 7.6% for migration time and peak area, respectively. Coupling with denuder-filter sampling, a preliminary survey has been conducted to determine gaseous and particulate carbonyls from air sampled at a roadside station. The method is shown to have sufficient sensitivity for 1-h sampling of ambient carbonyls with detection limits ranging from 0.045 to 1.2 microg/m3 and working range from 0.11 to 43.3 microg/m3 at a flow rate of 10 Lpm. The method requires minimal modification of commercially available capillary electrophoresis equipment and can differentiate gaseous and particulate carbonyls to provide essential information and objective data for adopting effective measures to combat the discharge of carbonyl compounds to the atmosphere.     

Microchip capillary electrophoresis for frontal analysis of free bilirubin and study of its interaction with human serum albumin

To meet the need for bedside monitoring of free bilirubin for neonates under critical conditions, a microfluidic chip was fabricated and tested for its coupling with CE/frontal analysis (FA) to determine free bilirubin and study of its binding interaction with HSA, which regulated its concentration in plasma. The poly(methyl methacrylate) (PMMA) multichannel chip was fabricated by CO2 laser ablation and bonded with a fused-silica separation capillary for CE/FA separation with UV detection. The chip was designed to allow a complete assay of four electrophoretic runs using preconditioned channels to speed up the determination of free bilirubin and to deliver quick results for bedside monitoring. Under optimized conditions, the linear working range for free bilirubin was from 10 to 200 micromol with RSDs from 2.1 to 5.0% for n=3, and the LOD at 9 micromol for S/N=3. From a binding study between bilirubin and HSA under FA condition, the second binding constant for bilirubin-HSA was determined as 1.07x10(5) L/mol and the number of binding sites per HSA as 3.46. The results enabled the calculation of free bilirubin for jaundiced infants based on the clinically significant level of total bilirubin, producing a range of 118.3-119.4 micromol/L. The developed method is shown to meet the clinical requirement with additional margin of protection to detect the early rising level of free bilirubin prior to jaundice condition. The low-cost microchip CE/FA device is shown to produce quick results with high potential to deliver a suitable bed-side monitoring method for bilirubin management in neonates.     

Bifurcating fragmentation behavior of gas-phase tryptic peptide dications in collisional activation

Collision-activated dissociation (CAD) of tryptic peptides is a cornerstone of mass spectrometry-based proteomics research. Principal component analysis of a database containing 15,000 high-resolution CAD mass spectra of gas-phase tryptic peptide dications revealed that they fall into two classes with a good separation between the classes. The main factor determining the class identity is the relative abundance of the peptide bond cleavage after the first two N-terminal residues. A possible scenario explaining this bifurcation involves trans- to cis-isomerization of the N-terminal peptide bond, which facilitates solvation of the N-terminal charge on the second backbone amide and formation of stable b(2) ions in the form of protonated diketopiperazines. Evidence supporting this scenario is derived from statistical analysis of the high-resolution CAD MS/MS database. It includes the observation of the strong deficit of a(3) ions and anomalous amino acid preferences for b(2) ion formation.     

Isolation and characterization of a neutral imino-semiquinone radical

The neutral imino-semiquinone, 4,6-di-tert-butyl-2-tert-butylimino-semiquinone (isqH.), can be prepared by a conproportionation of the parent aminophenol and iminoquinone compounds. The neutral radical species has been characterized in the solid state by X-ray diffraction and in solution by EPR and UV-vis absorption spectroscopy. The stability of the open-shell radical is derived from the basicity of the tert-butylimino group and the intramolecular hydrogen bond.     

Investigation of high shear wet granulation processes using different parameters and formulations

This study compared the granulation processes for different formulations using a laboratory-scale high shear mixer. The effects of critical process parameters (impeller speed, chopper speed and kneading time) on granule characteristics were evaluated. The characteristics of the granules studied included the size distribution, friability and morphological properties. The flow profiles of the wet mass and material deposition during the process were also studied. The results obtained showed that the effect of the impeller speed was determined by the starting material system. On the other hand, chopper speeds from 1200 to 3600 rpm and kneading times from 120 to 240 s had a consistent influence on all formulations. Moreover, it was found that the toroidal flow pattern of the wet mass could be maintained for a longer period and granules with a good spherical shape were obtained by removing the chopper during the last 120 s of the granulation process. In addition, the use of the pregelatinized starch in the formulation also led to a reduction in the wall adhesion of the material. It was concluded that the effectiveness of high shear wet granulation could be improved by choosing a proper combination of starting material and process parameters and by monitoring the mass motion during the process.     

Coupling of CpCr(CO)3 and heterocyclic dithiadiazolyl radicals. synthetic, x-ray diffraction, dynamic NMR, EPR, CV, and DFT studies

The reaction of the 1,2,3,5-dithiadiazolyls (4-R-C(6)H(4)CN(2)S(2))(2) (R = Me, 2a; Cl, 2b; OMe, 2c; and CF3, 2d) and (3-NC-5-tBu-C(6)H(3)CN(2)S(2))(2) (2e) with [CpCr(CO)(3)](2) (Cp = eta(5)-C(5)H(5)) (1) at ambient temperature respectively yielded the complexes CpCr(CO)(2)(eta(2)-S(2)N(2)CC(6)H(4)R) (R = 4-Me, 3a; 4-Cl, 3b; 4-OMe, 3c; and 4-CF(3), 3d) and CpCr(CO)(2)(eta(2)-S(2)N(2)CC(6)H(3)-3-(CN)-5-(tBu)) (3e) in 35-72% yields. The complexes 3c and 3d were also synthesized via a salt metathesis method from the reaction of NaCpCr(CO)(3) (1B) and the 1,2,3,5-dithiadiazolium chlorides 4-R-C(60H(4)CN(2)S(2)Cl (R = OMe, 8c; CF(3), 8d) with much lower yields of 6 and 20%, respectively. The complexes were characterized spectroscopically and also by single-crystal X-ray diffraction analysis. Cyclic voltammetry experiments were conducted on 3a-e, EPR spectra were obtained of one-electron-reduced forms of 3a-e, and variable temperature 1H NMR studies were carried out on complex 3d. Hybrid DFT calculations were performed on the model system [CpCr(CO)(2)S(2)N(2)CH] and comparisons are made with the reported CpCr(CO)(2)(pi-allyl) complexes.     

Anticancer Gold(III) Porphyrins Target Mitochondrial Chaperone Hsp60

Identification of the molecular target(s) of anticancer metal complexes is a formidable challenge since most of them are unstable toward ligand exchange reaction(s) or biological reduction under physiological conditions. Gold(III) meso‐tetraphenylporphyrin ( gold‐1 a ) is notable for its high stability in biological milieux and potent in vitro and in vivo anticancer activities. Herein, extensive chemical biology approaches employing photo‐affinity labeling, click chemistry, chemical proteomics, cellular thermal shift, saturation‐transfer difference NMR, protein fluorescence quenching, and protein chaperone assays were used to provide compelling evidence that heat‐shock protein 60 (Hsp60), a mitochondrial chaperone and potential anticancer target, is a direct target of gold‐1 a in vitro and in cells. Structure–activity studies with a panel of non‐porphyrin gold(III) complexes and other metalloporphyrins revealed that Hsp60 inhibition is specifically dependent on both the gold(III) ion and the porphyrin ligand.     

Direct patterning of composite biocompatible microstructures using microfluidics

This study demonstrates a versatile and fast method for patterning three-dimensional (3D) monolithic microstructures made of multiple (up to 24 demonstrated) types of materials, all spatially aligned, inside a microchannel. This technique uses confocal scanning or conventional fluorescence microscopy to polymerize selected regions of a photocurable material, and microfluidics to automate the delivery of a series of washes and photocurable reagents. Upon completion of lithographic cycles, the aligned 3D microstructures are suitable for microfluidic manipulation and analysis. We demonstrated the fabrication of composite 3D microstructures with various geometries, size scales (up to 1 mm2), spatial resolution (down to 3 microm), and materials. For a typical multi-cycle process, the total fabrication time was tens of minutes, compared to tens of hours for conventional methods. In the case of 3D hydrogels, a potential use is the direct patterning of inhomogeneous 3D microenvironments for studying cell behavior.     

The use of a [4 + 2] cycloaddition reaction for the preparation of a series of 'tethered' Ru(II)-diamine and aminoalcohol complexes

A series of catalysts have been prepared for use in the asymmetric transfer hydrogenation of ketones. The complexes were prepared using a [4 + 2] cycloaddition reaction at a key step in the reaction sequence. This provides a means for the synthesis of catalysts with modifications at specific sites.     

Interactive hidden Markov models and their applications

^** Email: wching{at}hkusua.hku.hk In this paper, we propose an Interactive hidden Markov model(IHMM). In a traditional HMM, the observable states are affecteddirectly by the hidden states, but not vice versa. In the proposedIHMM, the transitions of hidden states depend on the observablestates. We also develop an efficient estimation method for themodel parameters. Numerical examples on the sales demand dataand economic data are given to demonstrate the applicabilityof the model.