长周期啁啾光纤光栅级联作为波分复用隔离滤波器的数值研究

用矩阵传输法对长周期啁啾光纤光栅用于波分复用隔离滤波器的特性进行了分析,讨论了设计该类型高性能的波分复用隔离滤波器的关键技术,给出了仿真结果,表明该类型滤波器具有大的可用带宽、频率等间隔、隔离度高和通带内的色散可以忽略等优点,并指出通过调谐级联长周期光纤光栅之间的光纤长度可以实现频率间隔的调谐.     

高温电视摄像镜头设计

讨论了在高温环境下使用的电视摄像镜头的设计方法,分析了在这种特殊使用条件下的材料选择、光学参数的确定和光轴的指向问题.提出了一种采用三次成像的方法来实现设计要求,在保持系统各单元孔径都很小的前提下,拉长系统的结构长度,并给出了具体设计结果的评价参数,表明该系统可在较宽的温度范围内获得非常好的成像质量,设计思想适合于高温环境下光学系统的设计实践.     

Crystal structure and properties of FeSr2NdCu2O7+δ

The compound FeSr₂NdCu₂O₇₊ (Fe1212) was successfully synthesized by solid-state reaction. X-ray diffraction data indicate that the sample is of single phase. Rietveld whole-pattern-fitting method was used to refine the crystal structure of samples prepared under different annealing conditions using the tetragonal system with space group P4/mmm. Magnetization measurements indicate that magnetic susceptibility changes with temperature in a Curie-type manner. Resistance measurements indicate that these samples have a semiconductor-like behavior. PACS 61.10.Nz; 74.72.Jt     

Optically tunable chromatic dispersion controller with coupled-cavity etalon structure

We propose and demonstrate a novel optically tunable dynamic dispersion-compensation device with coupled-cavity etalon structure. Experimentally, it was achieved with an all-fiber coupled-cavity etalon made in an Er/Yb codoped fiber pumped by a 980-nm laser diode. The dispersion was tuned from -300 to +400 ps/nm in the experiment. The potential advantages of such optically tunable dispersion compensators include fast response time and remotely controllable operation.     

Spectra Analysis of a Novel Ti-Doped LiAlO2 Single Crystal

LiAlO2 single crvstals doped with Ti at concentration 0.2at.% are grown by the Czochralskl technique with dimensions φ42×55mm. Ti ions in the crystal are quadrivalence proven by comparing the absorption and fluorescence spectra of pure LiAlO2 and Ti： LiAlO2. After air and Li-rich atmosphere annealing, the absorption peaks in the range of 600-800nm disappear. We conclude that 682 and 756nm absorption peaks are attributed to the VLi and Vo absorptions, respectively： The peaks at 716nm and 798nm may stem from the VLi^＋ and absorptions. The colour-centre model can be applied to explain the experimental phenomena. Ti^4＋-doping produces more lithium vacancies in the LiAlO2 crystal. The intensities of [LiO4] and the associated bonds remain unchanged, which improves the anti-hydrolyzation and thermal stability of LiAlO2 crystals.     

Synthesis of azo benzothiazole polymer and its application of 1 × 2 Y-branched and 2 × 2 Mach–Zehnder interferometer switch

The azo benzothiazole polyurethane–urea (ABPUU) was synthesized from chromophore molecule 4-[(6-nitrobenzothiazole-2-yl)diazenyl]phenyl-1,3-diamine NBDPD, polyether polyol (NJ-210) and isophorone diisocyanate (IPDI). The structure, thermal property, mechanical property and physical property were characterized and investigated. The refractive index (n) and thermo-optic coefficient (dn/dT) of ABPUU was determined at different temperature and wavelength (532 nm, 650 nm and 850 nm) using attenuated total reflection (ATR) technique. Using the CCD digital imaging devices, transmission loss of ABPUU was measured. A 1 × 2 Y-branched and 2 × 2 Mach–Zehnder interferometer (MZI) switch with two rib waveguides, dual driving electrodes and two critical 3-dB couplers polymeric thermo-optic switches based on thermo-optic effect of prepared ABPUU were designed and simulation. The power consumption of the Y-branched switch is less than 0.84 mW. The Y-branched and MZI switching rising and falling times obtained are 0.8 ms and 0.2 ms, respectively.     

Highly efficient greenish blue-emitting organic diodes based on pyrene derivatives

We report the synthesis of pyrene derivatives as the light emissive layer for highly efficient organic electroluminescence (EL) diodes. Multilayer devices were fabricated with pyrene derivatives (ITO/NPB (50 nm)/blue material (30 nm)/BCP (10 nm)/Alq₃ (30 nm)/LiF (1 nm)/Al). By using 1,1′-dipyrene (DP) and 1,4-dipyrenyl benzene (DPB), the devices produced the blue EL emissions with 1931 Commission International de L’Eclairage coordinates of (x=0.21, y=0.35) and (x=0.19, y=0.25), respectively. The device with DPB shows a maximum brightness of 42,445 cd/m² at 400 mA/cm² and the luminance efficiency of 8.57 cd/A and 5.18 lm/W at 20 mA/cm².     

Potential PDP phosphors with strong absorption around 172 nm: Rare earth doped NaLaP2O7 and NaGdP2O7

NaLaP₂O₇ and NaGdP₂O₇ powder samples are prepared by solid-state reactions at 750 and 600 °C, respectively, and the VUV-excited luminescence properties of Ln³⁺ (Ln=Ce, Pr, Tb, Tm, Eu) in both diphosphates are studied. Ln³⁺ ions in both hosts show analogous luminescence. For Ce³⁺-doped samples, the five Ce³⁺ 5d levels can be clearly identified. As for Pr³⁺ and Tb³⁺-doped samples, strong 4f-5d absorption band around 172 nm is observed, which matches well with Xe-He excimer in plasma display panel (PDP) devices. As a result, Pr³⁺ can be utilized as sensitizer to absorb 172 nm VUV photon and transfer energy to appropriate activators, and Tb³⁺-doped NaREP₂O₇(RE=La, Gd) are potential 172 nm excited green PDP phosphors. For Tm³⁺ and Eu³⁺-doped samples, the Tm³⁺-O²⁻ charge transfer band (CTB) is observed to be at 177 nm, but the CTB of Eu³⁺ is observed at abnormally low energy position, which might originate from multi-position of Eu³⁺ ions. The similarity in luminescence properties of Ln³⁺ in both hosts indicates certain structural resemblance of coordination environment of Ln³⁺ in the two sodium rare earth diphosphates.