Domino allylation and cyclization of ortho-alkynylbenzaldehydes with allyltrimethylsilane catalyzed by Pd(II)-Cu(II) bimetallic systems

The reaction of ortho-alkynylated benzaldehydes 1 with allyltrimethylsilane under the Pd(OAc)₂-CuCl₂ catalyst system gave the isochromene derivatives 2 together with the chlorinated products 3. When the reaction was conducted in the presence of half equiv of H₂O, the formation of 3 was suppressed and 2 was obtained in good to high yields. When the reaction of 1a was carried out with trimethylsilylcyanide instead of allylsilane, the cyano group-substituted isochromene 9 was obtained in 94% yield.     

The passivation phenomenon of platinum in fused lithium chloride + potassium chloride eutectic: Part II. Chlorine overpotential and superpassivation of platinum

Platinum is known to have a very high chlorine overpotential, about 0.8 V, in fused lithium chloride + potassium chloride eutectic. The high overpotential can be ascribed to the formation of the thick passivation film of platinum chlorides. The high chlorine overpotential was decreased by the addition of alkali metal oxides and a reversible chlorine evolution was revealed in a similar manner as the graphite electrode. The reversible chlorine evolution was ascribed to the formation of the oxide passivation film. The chlorine overpotential at the oxide film was increased stepwise as the applied potential was made more positive. The stepped transitions of the chlorine overpotential was ascribed to the valence change of the oxide film. Platinum shows a typical N-shaped passivation at +0.65 V versus Ag/AgCl(0.1) which has been ascribed to the dissolution of platinum into Pt(II) ions and following formation of the passivation film of supersaturated Pt(II) chloride. Platinum was found to show another passivation phenomenon at high temperatures, above 450°C. The N-shaped current-potential curve was observed at +1.8 V which was far more positive than the potential of the standard chlorine electrode. The dissolution of platinum prior to the passivation was found to occur due to the formation of high valence platinum ions such as Pt⁶⁺ and Pt⁸⁺.     

Pheromone synthesis—63 Synthesis of both the enantiomers of 2,3-dihydro-2- isopropyl-2,5-dimethylfuran,a sex specific compound in females of the beetle hylecoetus dermestoidesL

Both the enantiomers of 2,3-dihydro-2-isopropyl-2,5-dimethylfuran were synthesized employing the Sharpless asymmetric epoxidation reaction. The (R)-(—)-enantiomer of this cyclic enol ether was also synthesized starting from (R)-(—)-linalool.     

AuCl(3)-catalyzed benzannulation: synthesis of naphthyl ketone derivatives from o-alkynylbenzaldehydes with alkynes

The reaction of o-alkynylbenzaldehydes 1 and alkynes 2 in the presence of a catalytic amount of AuCl3 in (CH2Cl)2 at 80 degrees C gave naphthyl ketone products in high yields. The AuCl3-catalyzed formal [4 + 2] benzannulation proceeds most probably through the coordination of the triple bond of 1 to AuCl3, the formation of benzo[c]pyrylium auric ate complex via the nucleophilic addition of the carbonyl oxygen atom, the Diels-Alder addition of alkynes 2 to the auric ate complex, and subsequent bond rearrangement. Similarly, the AuCl3-catalyzed reactions of o-alkynylacetophenone and o-alkynylbenzophenone with phenylacetylene afforded the corresponding naphthyl ketone products in good yields.     

A novel synthesis of α-hydroxy- and α,α′-dihydroxyketone from α-iodo and α,α′-diiodo ketone using photoirradiation

A novel reaction of α-iodo ketone (α-iodocycloalkanone, α-iodo-β-alkoxy ester, and α-iodoacyclicketone) with irradiation under a high-pressure mercury lamp gave the corresponding α-hydroxyketone in good yields. In the case of α,α′-diiodo ketone, α,α′-dihydroxyketone which little has been reported until now was obtained. This reaction affords a new, clean and convenient synthetic method for α-hydroxy- and α,α′-dihydroxyketone.     

1,2-silyl-migrative cyclization of vinylsilanes bearing a hydroxy group: stereoselective synthesis of multisubstituted tetrahydropyrans and tetrahydrofurans(1)

Acid-catalyzed intramolecular addition of a hydroxy group to alpha-alkylated vinylsilanes has been studied. Treatment of (Z)-5-alkyl-5-silyl-4-penten-1-ols 1 (R = alkyl) with 5 mol % TiCl(4) in CHCl(3) gave trans-2-alkyl-3-silyltetrahydropyrans 2 exclusively (trans/cis = >99/1 to 97/3). The cyclization efficiency and rate strongly depended on the geometry of the C-C double bond and the silyl group. The use of (E)-vinylsilanes resulted in lower yields with poor cis-selectivity. In the cyclization of (Z)-1 (R = Bu), the silyl group used, the reaction time, and the yield of 2 were as follows: SiMe(2)Ph, 9.5 h, 75%; SiMe(3), 7.5 h, 66%; SiMePh(2), 24 h, 58%; SiMe(2)-t-Bu, 0.75 h, 85%; SiMe(2)Bn, 1.5 h, 78%. This 1,2-silyl-migrative cyclization could be applied to stereoselective synthesis of trisubstituted tetrahydropyrans. The acid-catalyzed reaction of 1-, 2-, or 3-substituted (Z)-5-silyl-4-nonen-1-ols 8 gave r-2,t-3,c-6-, r-2,t-3,t-5-, or r-2,t-3,c-4-trisubstituted tetrahydropyrans with high diastereoselectivity, respectively. (Z)-4-Alkyl-4-silyl-3-buten-1-ols 5 as well as 1 underwent the 1,2-silyl-migrative cyclization to give 2-alkyl-3-silyltetrahydrofurans 6 with high trans-selectivity. This silicon-directed cyclization was also available for the stereoselective synthesis of tri- and tetrasubstituted tetrahydrofurans.     

Purification of a synthetic myristylated peptide by counter-current chromatography

A preparative purification of myristyl-Gly-Asn-Ile-Phe-Ala-Asn-Leu-Phe-Lys-Gly-Leu-Phe-Gly-Lys-Lys-Glu -NH2 was accomplished using the multi-coil counter-current chromatograph. A partition coefficient was determined in the n-butanol-acetic acid-water (4:1:5) system. Chromatographic runs were made in this system and one modified with ethyl acetate. The peptide material showed anomalous elution behavior due to its surfactant properties. It was found that by loading the sample exclusively in the stationary phase, satisfactory retention of the compound occurred. Finally, conditions utilizing the upper phase as the mobile phase successfully separated the impurities.     

Cationic dye-sensitized degradation of sodium hyaluronate through photoinduced electron transfer in the upper excited state

The formation of ground-state complexes of methylene blue (MB) and thionine (TN) with sodium hyaluronate (NaHA) was clearly observed by means of absorption spectra in aqueous solution. Irradiation of the complexes using 313 nm light caused significant degradation of NaHA under oxygen and argon. However, the use of visible light over 400 nm, which gives the lowest excited singlet state of the cationic dyes, caused no degradation. MB and TN were more efficient sensitizers for the degradation of NaHA than rose bengal (RB), although RB is a more efficient singlet oxygen (1O2) sensitizer than the cationic dyes. Under similar conditions the polysaccharides with carboxyl groups, such as alginic acid and polygalacturonic acid, also photodecomposed. However, the polysaccharides without carboxyl groups, such as pullulan and methyl cellulose, did not. The irradiation of the polysaccharides in the presence of powdered titanium dioxide as a photocatalyst to generate the hydroxyl radical (.OH) in aerated aqueous solution caused the fragmentation of all the polymers. It was confirmed that methyl viologen, an electron-accepting sensitizer, formed a charge-transfer complex with NaHA, the irradiation of which caused the efficient degradation of NaHA. In the presence of beta- and gamma-cyclodextrins the MB- and TN-sensitized photodegradation of NaHA was markedly suppressed. This was probably due to the formation of the inclusion complexes comprising the cationic dyes and the cyclodextrins. On the basis of the results obtained we propose that the cationic dye-sensitized degradation of NaHA involves a photoinduced electron-transfer process between the upper excited dyes and the ground-state NaHA and that .OH and 1O2 do not participate in the degradation.     

Rapid and simultaneous analysis of dichlorvos, malathion, carbaryl, and 2,4-dichlorophenoxy acetic acid in citrus fruit by flow-injection ion spray ionization tandem mass spectrometry

A simple method for the rapid and simultaneous analysis of dichlorvos (DDVP), malathion, carbaryl, and 2,4-dichlorophenoxy acetic acid (2,4-D) in citrus fruit, which uses flow-injection ion spray ionization tandem mass spectrometry, has been developed for the first time. The method involves the combined use of stable isotopically labeled internal standards (DDVP-d₆, malathion-d₁₀, carbaryl-d₇, and 2,4-D-d₅) and a multiple reaction monitoring technique. The average recoveries for the pesticides at the same concentrations as their tolerance levels (DDVP: 0.1-0.2 μg g⁻¹; malathion: 0.5-4.0 μg g⁻¹; carbaryl: 1.0 μg g⁻¹; 2,4-D: 1.0-2.0 μg g⁻¹) ranged from 90 to 119% with the relative standard deviation (R.S.D.) ranging from 1.0 to 13.1% (n = 5). Analysis time, including sample preparation and determination, was only 15 min. The present method is effective for screening DDVP, malathion, carbaryl, and 2,4-D in citrus fruit.     

Novel pyridinium salts as cationic thermal and photoinitiators and their photosensitization properties

Novel pyridinium salts [N‐(α‐phenylbenzyl)‐, N‐(1‐naphthylmethyl)‐, or N‐cinnamyl p‐ or o‐cyanopyridinium hexafluoroantimonates] were synthesized by the reaction of p‐ or o‐cyanopyridine and the corresponding bromides followed by anion exchange with KSbF₆. These pyridinium salts polymerized epoxy monomers at lower temperatures than previously reported for N‐benzyl‐2‐cyanopyridinium hexafluoroantimonate. The o‐substituted pyridinium salts showed higher activity than the p‐substituted ones, and the crosslinked epoxy polymers cured with these initiators showed higher glass‐transition temperatures. These pyridinium salts photoinitiated radical polymerization as well as cationic polymerization. The photopolymerization was accelerated by the addition of aromatic ketones as photosensitizers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1037–1046, 2002