Preparation of aromatic copolyesteramides by the direct polycondensation with a vilsmeier adduct derived from tosyl chloride and N,N-dimethylformamide

The reaction promoted by Vilsmeier adduct derived from tosyl chloride (TsCl) with N,N-dimethylformamide (DMF) was successfully applied to the preparation of copolyesteramides of high molecular weights directly from aromatic dicarboxylic acids, diamines, and bisphenols. The polycondensation was significantly affected by the reaction of activated dicarboxylic acids with bisphenols and diamines. Addition of a mixture of bisphenols and diamines likely caused gelation of the reaction mixtures, resulting in insoluble polymers, especially with high mol % diamines. Stepweise addition of them, however, gave the homogeneous reaction mixtures and copolymers of better solubility. These phenomena were studied in terms of sequence length distribution of polyester units, which was estimated by thermal analyses of the random copolymers prepared under various conditions for the initial reaction with bisphenols.     

Radical-initiated homo- and copolymerization of α-methylene-γ-butyrolactone

The kinetics of α-methylene-γ-butyrolactone (α-MBL) homopolymerization was investigated in N,N-dimethylformamide (DMF) with azobis(isobutyronitrile) as initiator. The rate of polymerization (R_p) was expresed by R_p = k[AIBN]^0.54[α-MBL]^1.1 and the overall activation energy was calculated as 76.1 kJ/mol. Kinetic constants for α-MBL polymerization were obtained as follows: k_p/k_t^1/2 = 0.161 L^1/2 mol^?1/2·s^?1/2; 2fk_d = 2.18 × 10^?5 s^?1. The relative reactivity ratios of α-MBL(M₂) copolymerization with styrene (r₁ = 0.14, r₂ = 0.87) were obtained. Applying the Q–e scheme led to Q = 2.2 and e = 0.65. These Q and e values for α-MBL are higher than those for MMA     

Separation of stereoisomers of some terpene derivatives by capillary gas chromatography-mass spectrometry and high-performance liquid chromatography using beta-cyclodextrin derivative columns

Gas chromatographic separations of the stereoisomers of menthol derivatives, important intermediates in the synthesis of physiologically active natural products, were carried out on several substituted beta-cyclodextrin (CD) columns, including per-O-methyl-beta-cyclodextrin (PME-beta-CD), heptakis(2,3-di-O-acetyl-6-tert-butyldimethylsilyl)-beta-CD (DIAC-6-TBDS-beta-CD), and heptakis(2,3-di-O-methyl-6-tert-butyldimethylsilyl)-beta-CD (DIME-6-TBDS-beta-CD) as chiral stationary phases (CSPs). With the DIME-6-TBDS-beta-CD column, a separation of the Z- and E-isomers of methylidenementhol was accomplished; no separation was achieved with the other columns. The stereoisomers of methylidenementhol and the corresponding tert-butyldimethylsilyl (TBS) ether were separated on both the beta-CD and the heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin (TME-beta-CD) columns by high-performance liquid chromatography (HPLC) with a mobile phase involving acetonitrile and H(2)O. For the separation of the Z- and E-isomers of methylidenementhol, the TME-beta-CD column was superior. In contrast, the beta-CD column was preferable in the case of the corresponding TBS ether.     

A new synthesis, including asymmetric synthesis, of spiro[4.n]alkenones from three components: cyclic ketones, chloromethyl p-tolyl sulfoxide, and acetonitrile; and a formal total synthesis of racemic acorone

1-Chlorovinyl p-tolyl sulfoxides were synthesized from several kinds of cyclic ketones and chloromethyl p-tolyl sulfoxide in good yields. Treatment of the 1-chlorovinyl p-tolyl sulfoxides with cyanomethyllithium at −78°C to room temperature gave spirocyclic enaminonitriles in high yields. Acidic treatment of the enaminonitriles afforded spiro[4.n]alkenones in good yields. By using an unsymmetrical cyclic ketone, α-tetralone, and optically active chloromethyl p-tolyl sulfoxide, this procedure afforded enantiomerically pure spiro[4.5]decenone in good yield with excellent asymmetric induction from the sulfoxide chiral center. By using this method a formal total synthesis of a racemic spirocyclic sesquiterpene, acorone, was realized.     

Low-capacity cation-exchange chromatography of ultraviolet-absorbing urinary basic metabolites using a reversed-phase column coated with hexadecylsulfonate

A low-capacity cation-exchange HPLC method for the determination of UV-absorbing organic cations such as amino acids, histidine dipeptides, and creatinine was developed. A commercially available reversed-phase column was dynamically coated with hexadecylsulfonate, and was successfully used for the cation-exchange separation with ethylenediammonium eluting ion at pH 2.5. The coated column was enough stable for the specific use with a completely aqueous mobile phase at low and constant pH; and the day-to-day reproducibility for retention time was 0.9-1.7% of RSD (relative standard deviation). The linear relation between concentrations and detector responses (area) by using a photodiode-array UV detection at 210 nm ranged from 0.2 to 1000 microM (sample size 50 microl) for 1-methylhistidine, 3-methylhistidine, histidine, creatinine, anserine, carnosine, and homocarnosine, and from 0.5 to 2000 microM for creatine, tyrosine, and phenylalanine, with less than 5% of RSD. The UV spectrum (190-300 nm) obtained during chromatography was very indicative for each analyte. Overall recoveries were 97-104%. The developed HPLC method in conjunction with preliminary fractionation technique could be applied to the analysis of urine of patient with metabolic disorder such as phenylketonuria.     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

A novel synthesis of amino acid derivatives of phospholene oxides

A convenient synthetic approach is established to prepare a new class of 1-l-α-amino acid derivatives of phospholene oxides by amination of (±)-1-chloro-2-phospholene-1-oxides with several optically pure l-α-amino acid esters. All compounds obtained as a diastereomeric mixture in good to high yields. The two diastereomers were successfully separated by column chromatography and structurally identified by their spectral analyses.     

Synthesis of enantiopure 1,2-diamine attached to cross-linked polystyrene and its application to an insoluble catalyst for asymmetric hydrogenation

A novel enantiopure 1,2-diamine (5) having two phenolic hydroxy groups was attached into chloromethylated polystyrene through benzyl ether linkage, which was used as a chiral ligand of the catalyst in asymmetric hydrogenation of acetophenone.     

Lipase-catalyzed transformation of poly(lactic acid) into cyclic oligomers

Enzymatic transformations into cyclic oligomers were carried out with the objective of developing chemical recycling of poly(lactic acid)s, such as poly(D,L-lactic acid) (PDLLA), poly(D-lactic acid) (PDLA) and poly(L-lactic acid) (PLLA), which are typical biodegradable polymers. They were degraded by lipase in an organic solvent to produce the corresponding cyclic oligomer with a molecular weight of several hundreds. PDLLA (with a Mw of 84,000) was quantitatively transformed into cyclic oligomers by lipase RM (Lipozyme RM IM) in chloroform/hexane at 60 degrees C. PLLA (with a Mw of 120,000) was transformed into cyclic oligomer by lipase CA (Novozym 435) at a higher temperature of 100 degrees C in o-xylene. The oligomer structure was identified by 1H and 13C NMR spectroscopy and MALDI-TOF (matrix assisted laser desorption/ionization-time-of-flight) mass spectrometry.     

Thermal decomposition of the solvent-extracted chloro complexes of vanadium(IV) with trioctylamine and trioctylmethylammonium chloride

The complexes (R₃NHVO(OH)Cl₂)₂ and (R₃RNVO(OH)Cl₂)₂ prepared by drying in vacuo the organic solutions from the extraction into benzene of aqueous vanadyl chloride solution with trioctylamine (TOA, R₃N) and trioctylmethylammonium chloride (TOMAC, R₃RNCl), were studied by thermogravimetry and differential thermal analysis under an atmosphere of nitrogen, and the products of their thermal decomposition, such as volatile matter and residues, by gas chromatography. X-ray diffraction and infrared spectroscopy. It was found that the complexes with TOA and TOMAC thermally decompose to V₂O₃ at 200–300° by cracking of the compounds R₃NHVO(OH)Cl₂ and R₃RNVO(OH)Cl₂ formed via dissociation of the complexes at about 150°.

---

Zusammenfassung Die Komplexe (R₃NHVO(OH)Cl₂)₂ und (R₃RNVO(OH)Cl₂)₂ wurden hergestellt, indem benzolische und wässrige Vanadylchlorid-Lösungen mit Trioctylamin (TOA, R₃N) und Trioctylmethylammoniumchlorid (TOMAC, R₃RNCl) extrahiert und die erhaltenen Lösungen im Vakuum eingedampft wurden. Die Komplexen wurden in Stickstoffatmosphäre mittels TG und DTA untersucht und die thermischen Zersetzungsprodukte, und zwar sowohl die flüchtigen Verbindungen als auch die Rückstände, gaschromatographisch bzw. röntgendiffraktometrisch und IR-spektroskopisch bestimmt. Es wurde festgestellt, daß die Komplexe mit TOA und TOMAC bei 150° in die Verbindungen R₃NHVO(OH)Cl₂ und R₃RNVO(OH)Cl₂ dissoziieren, die bei 200–300° thermisch zu V₂O₃ zersetzt werden.

---

(R₃NHVO(OH)Cl₂)₂ (R₃RNVO(OH)Cl₂)₂ (R₃,) ( , R₃RNCl). , , . , 200–300° V₂₃ R₃NV()l₂ R₃RNVO(OH)Cl₂, 150°.

---

---

We wish to thank the Koei Chemical Co. Ltd. for samples of TOA and TOMAC.