A Simple and Practical Method for Fluence Determination in Bench-Scale UV-LED Setups

In UV disinfection of water, the fluence of UV required to inactivate a target microorganism is determined based on the procedures developed for conventional mercury-based UV lamps with collimation. In this regard, a simple and practical method with a mathematical model and radiometry is proposed for determining the fluence rate with UV light-emitting diodes (UV-LEDs). This method was applied to a bench-scale UV-LED setup and validated by comparing the calculations with the measurements using either a spectroradiometer or a chemical actinometer. The results showed high accordance with spectroradiometer outputs with a linear regression equation y = 0.997x (x: model calculation, y: spectroradiometer output, r² = 0.999, P < 0.001 for n = 20) in an experiment varying the distance between the measurement points and the UV-LEDs. Meanwhile, the proposed method and chemical actinometry exhibited 98% concordance. Furthermore, this method was applied to determine the fluence-response profiles of Pseudomonas aeruginosa, and the results demonstrated that the proposed method was appropriate at two different distances between the UV-LEDs and the solutions. To conclude, the proposed method can determine the fluence in a UV-LED bench-scale setup in a simple and practical way, which would potentially promote the research and development of water treatment using UV-LEDs.     

New chitin-based polymer hybrids, 1. Miscibility of poly(vinyl alcohol) with chitin derivatives

As a new class of biopolymer-based hybrid materials, the present paper describes the binary blends of a modified chitin and poly(vinyl alcohol) (PVA) which are miscible in the whole range of compositions. The blend films were prepared by the solvent cast method from a homogeneous aqueous solution of PVA and a chitin derivative having poly(2-methyl-2-oxazoline) side chains. Miscibility between PVA and poly(2-methyl-2-oxazoline) homopolymer was also revealed. Differential scanning calorimetry and FT-IR analyses were used to investigate the blends.     

Aggregate of a peptide-containing block copolymer with a lipase

The peptide-containing block copolymer poly(N-acetyliminoethylene)-block-poly(L -phenylalanine) (1) formed large water-soluble aggregates in water due to the hydrophobic and hydrogen-bonding character of the poly(L -phenylalanine) block. The solution properties of 1 were compared with those of the block copolymer poly(N-acetyliminoethylene)-block-poly(N-benzoyliminoethylene) (2) with an analogous structure. 1 formed aggregates even though the poly(phenylalanine) segment was short as compared with 2 in which hydrophobic interaction may be the only driving force to form aggregates. The aggregates have strong capability of incorporating Lipase P and largely increase the hydrolysis activity against p-nitrophenyl propionate as compared with that of free Lipase P.     

Polymerization chemistry of the family of cyclic imino ethers

Characteristics of the polymerization mechanisms of the family of cyclic imino ethers are described. The variety of the mechanism of propagation has been systematized on the basis of the nature of propagating species, i.e., cationic or electrophilic covalent (dipole) species. In the polymerizations of 2-alkyl cyclic imino ethers (5- and 6-membered), propagation mechanism via one of these two different species has been established, which is dependent upon the relative nucleophilic reactivities of the monomer and the counter anion derived from initiator. The polymerization of cyclic pseudoureas having a cyclic amine substituent at 2-position proceeds in two different ways. Ionic propagation leads to the single isomerization/ring-opening polymerization involving only the cyclic imino ether ring. On the other hand, covalent propagation gives rise to the double isomerization ring-opening polymerization involving the two rings of cyclic imino ether and cyclic amine. Polymerization of 5-membered cyclic iminocarbonate with a sulfonate initiator proceeds through the isomerization/ring-opening of 2-oxazoline ring. The same monomer was isomerized to the corresponding cyclic urethane when it was treated with benzyl bromide.     

Poly[2,4-bis(chloroamino)-6-vinyl-1,3,5-triazine] as a recyclable oxidizing agent of alcohols

A polymer containing dichlorotriazine moiety was prepared readily by the reaction of poly(2,4-diamino-6-vinyl-1,3,5-triazine) with tert-butyl hypochlorite. This polymer oxidizes various primary and secondary alcohols to the corresponding carbonyl compounds under mild conditions, while the reaction of the monomeric analogue N,N′-dichloroacetoguanamine with alcohols does not proceed. The polymer reagent can be handled easily and recycled for further use.     

Porous Mn2+ Magnet with a Pt−Cl Framework: Correlation between Water Vapor Adsorption/Desorption and Slow Magnetic Relaxation

We report the water adsorption/desorption behavior and dynamic magnetic properties of the Pt−Cl chain complex [{[Pt(en)₂][PtCl₂(en)₂]}₃][{(MnCl₅)Cl₃}₂] ⋅ 12H₂O ( 1 ). Upon heating 1 in a vacuum, we obtained the dehydrated form [{[Pt(en)₂][PtCl₂(en)₂]}₃][{(MnCl₅)Cl₃}₂] ( 1DH ). The framework structures of 1 and 1DH are identical, and both complexes underwent slow magnetic relaxation. However, the magnetic relaxation times for 1DH were shorter than those for 1 , meaning that the dynamic magnetic properties were controlled upon water vapor adsorption/desorption. From detailed analyses of the dynamic magnetic behavior, a phonon-bottleneck effect contributes to the magnetic relaxation processes. We discuss the mechanism for the changes in the magnetic relaxation processes upon dehydration in terms of the heat capacity and thermal conductivity.