The dependence of cyclopolymerizability of acrylic and methacrylic anhydrides on various conditions: New interpretation of temperature dependency of cyclization constant in radical cyclopolymerization of nonconjugated dienes

The cyclization constant K_c in the radical cyclopolymerization of acrylic and methacrylic anhydrides was evaluated in detail under various conditions. No linear relationship between in K_c and 1/T was observed; cyclization was acceleratively enhanced at elevated temperatures. The K_c values also increased with decreased monomer concentration and increased solvent polarity. These increasing dependencies of K_c are ascribed to the increased significance of depropagation, demonstrating a new interpretation of the temperature dependence of the cyclization constant in the radical cyclopolymerization of nonconjugated dienes.     

Reaction of azole condensed quinoxaline N-oxides with acetic anhydride

The reaction of 7-chlorotetrazolo[1,5-α]quinoxaline 5-oxide 6a with acetic anhydride gave 7-chloro-5-(7-chlorotetrazolo[1,5-α]quinoxalin-4-yl)-4,5-dihydro-4-oxotetrazolo[1,5-α]quinoxaline 7a , while the reaction of 7-chloro-1,2,4-triazolo[4,3-α]quinoxaline 5-oxide 6b with acetic anhydride afforded 7-chloro-5-(7-chloro-1,2,4-triazolo[4,3-α]quinoxalin-4-yl)-4,5-dihydro-4-oxo-1,2,4-triazolo[4,3-α]quinoxaline 7b and 7-chloro-4,5-dihydro-4-oxo-1,2,4-triazolo[4,3-α]quinoxaline 8b . The reaction of compound 6a or 6b with acetic anhydride/acetic acid provided 7-chloro-4,5-dihydro-4-oxo-tetrazolo[1,5-α]quinoxaline 8a or compound 8b , respectively.     

Singlet Oxygen–mediated Hydroxyl Radical Production in the Presence of Phenols: Whether DMPO–·OH Formation Really Indicates Production of ·OH?¶

The reaction of singlet oxygen (1O2) generated by ultraviolet-A (UVA)-visible light (lambda > 330 nm) irradiation of air-saturated solutions of hematoporphyrin with phenolic compounds in the presence of a spin trap, 5,5-dimethyl-1-pyrroline-N-oxide (DMPO), gave an electron spin resonance (ESR) spectrum characteristic of the DMPO-hydroxyl radical spin adduct (DMPO-*OH). In contrast, the ESR signal of 5,5-dimethyl-2-pyrrolidone-N-oxyl, an oxidative product of DMPO, was observed in the absence of phenolic compounds. The ESR signal of DMPO-*OH decreased in the presence of either a *OH scavenger or a quencher of *O2 and under anaerobic conditions, whereas it increased depending on the concentration of DMPO. These results indicate both 1O2- and DMPO-mediated formation of free *OH during the reaction. When DMPO was replaced with 5-(diethoxyphosphoryl)-5-methyl-1-pyrroline-N-oxide (DEPMPO), no DEPMPO adduct of oxygen radical species was obtained. This suggests that 1O2, as an oxidizing agent, reacts little with DEPMPO, in which a strong electron-withdrawing phosphoryl group increases the oxidation potential of DEPMPO compared with DMPO. A linear correlation between the amounts of DMPO-*OH generated and the oxidation potentials of phenolic compounds was observed, suggesting that the electron-donating properties of phenolic compounds contribute to the appearance of *OH. These observations indicate that 1O2 reacts first with DMPO, and the resulting DMPO-1O2 intermediate is immediately decomposed/reduced to give *OH. Phenolic compounds would participate in this reaction as electron donors but would not contribute to the direct conversion of 1O2 to *OH. Furthermore, DEPMPO did not cause the spin-trapping agent-mediated generation of *OH like DMPO did.     

Photoinduced chemical reactions on natural single crystals and synthesized crystallites of mercury(II) sulfide in aqueous solution containing naturally occurring amino acids

Photoirradiation at >300 nm of aqueous suspensions of several natural crystal specimens and synthesized crystallites of mercury(II) sulfide (HgS) induced deaminocyclization of optically active or racemic lysine into pipecolinic acid (PCA) under deaerated conditions. This is the first example, to the best of our knowledge, of photoinduced chemical reactions of natural biological compounds over natural minerals. It was found that the natural HgS crystals had activity higher than those of synthesized ones but lower than those of other sulfides of transition metals, e.g., CdS and ZnS, belonging to the same II-IV chalcogenides. In almost all of the photoreactions, decompostion of HgS occurred to liberate hydrogen sulfide (H(2)S) and Hg(2+), and the latter seemed to have undergone in-situ reductive deposition on HgS as Hg(0) after a certain induction period (24-70 h) during the photoirradiation, as indicated by the darkened color of the suspensions. The formation of PCA, presumably through combination of oxidation of lysine and reduction of an intermediate, cyclic Schiff base, could also be seen after a certain induction time of the Hg(0) formation. This was supported by the fact that the addition of small amount of Hg(2+) (0.5 wt % of HgS) increased the PCA yield by almost 2-fold. We also tried to elucidate certain aspects of the plausible stereochemical reactions in relation to the chiral crystal structure of HgS. Although, in some experiments, slight enantiomeric excess of the product PCA was observed, the excess was below or equal to the experimental error and no other supporting analytical data could not be obtained; we cannot conclude the enantiomeric photoproduction of PCA by the natural chiral HgS specimen.     

Photoelectrochemistry of p-type Cu2O semiconductor electrode in ionic liquid

We investigated the photoelectrochemical characteristics and photo-stability of Cu₂O layered on a copper plate using a hydrophobic ionic liquid. Our findings revealed that Cu₂O is stable under white light irradiation, provided water is removed from the electrolyte. Methyl viologen derivative, a well-established electron acceptor, was introduced to the ionic liquid electrolyte, allowing the photo-induced electron transfer reaction at the Cu₂O/electrolyte interface to be characterized. The methyl viologen derivative exhibited two distinct redox reactions at −0.56 V and −0.98 V vs. Ag/AgCl, clearly indicating that no dimer formation or co-proportionation reaction occurred. The excessive photocurrents being continuously generated resulted from a viable photo-induced electron transfer reaction from the Cu₂O to the acceptor. However, in contrast, the reduction of the Cu₂O by water in the aqueous solution causes this electron transfer to be inhibited. We further demonstrate that these findings are vital to understanding the role of the Cu₂O and its photoelectrochemical applications.     

Polymerization of tetrahydrofuran by AlEt3–H2O promoter system: Rate of propagation reaction

Kinetic studies were carried out on the polymerization of tetrahydrofuran with catalyst systems of aluminum alkyl–epichlorohydrin. As aluminium alkyl species AlEt₃, AlEt₃–H₂O (1:0.1 to 1:1.0), and “oxyaluminum ethyl” were employed. The polymerizations with these catalysts are characterized by a mechanism of stepwise addition without chain transfer or termination, which is expressed by the kinetic relation R_p = K_p[P*] ([M]–[M]_e), where [M] and [M]_e are the instantaneous and equilibrium concentrations of monomer and [P*] is the concentration of propagating species calculated from the amount and molecular weight of the product polymer. The determination of the rate constant k_p for these catalysts has shown that the polymerization rate varied considerably with the change of aluminum alkyl species, i.e., with the water-to-aluminum ratio, but the propagation rate constant itself varied very little. The variation of polymerization rate was, therefore, attributed primarily to the differences in concentration of the propagating species, i.e. the efficiency of the catalyst in forming propagating species. The catalyst efficiency was closely related to the acid strength of the aluminum alkyl species, which was estimated from the magnitude of shift of the xanthone carbonyl band in the infrared spectrum of its coordination complex with aluminum alkyl. The maximal catalyst efficiency was attained at about [H₂O]/[AlEt₃] = 0.75.     

Theoretical study of endohedral metallofullerenes: Sc3−nLanN@C80 (n=0–3)

To provide theoretical insight into the structures and properties of Sc₃N@C₈₀, which has been isolated in high yield and purity as a new stable endohedral metallofullerene, density functional calculations are carried out for the Sc_3?nLa_nN@C₈₀ (n=0–3) series. Because of electron transfer from Sc₃N to C₈₀, the electronic structure of Sc₃N@C₈₀ is formally described as (Sc₃N)⁶⁺C$_{80}^{6-}$. The encapsulated Sc₃N cluster takes a planar structure with long Sc–Sc distances and is highly stabilized inside the I_h cage of C₈₀, which rotates rapidly. As the number of La atoms increases, the Sc_3?nLa_nN cluster is forced to maintain a pyramidal structure in Sc_3?nLa_nN@C₈₀. In addition, the C₈₀ cage takes an open‐shell electronic structure due to an increase in the number of electrons transferring from Sc_3?nLa_nN. These make the endohedral structure less stable and more reactive. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1353–1358, 2001