Oxygen‐sensing properties of 5,10,15,20‐tetraphenylporphinato platinum(II) and palladium(II) covalently bound on poly(isobutyl‐co‐2,2,2‐trifluoroethyl methacrylate)

A novel methacrylate monomer bearing 5,10,15,20‐tetraphenylporphyrinato palladium(II) (PdTPP) (monomer 1a ) was synthesized and copolymerized with isobutyl methacrylate (IBM) and 2,2,2‐trifluoroethyl methacrylate (TFEM) to give poly (IBM‐co‐TFEM) bearing PdTPP (copolymer 2a ) as a dye‐conjugated oxygen‐permeable polymer for pressure‐sensitive paint applications. The introduction of PdTPP into copolymer 2a was confirmed by UV–vis spectroscopy and extended X‐ray absorption fine structure analysis. The Stern–Volmer plots of the copolymer 2a and a mixture of PdTPP and poly(IBM‐co‐TFEM) both showed downward curvature, unlike that of the platinum complex analogue (copolymer 2b ) previously reported. The plots were successfully fitted with a two‐site model to give two distinct Stern–Volmer constants (K_SV1 and K_SV2) and the partition ratio f₁. Interestingly, the f₁ values for the copolymer 2a were almost constant at about 0.98, whereas those of the mixture of PdTPP and poly(IBM‐co‐TFEM) increased from 0.889 to 0.967 as the temperature was increased. This finding suggests that there are two distinct microheterogeneities, one temperature‐dependent and the other temperature‐independent, in the mixture of PdTPP and poly(IBM‐co‐TFEM). The dye‐conjugation approach effectively eliminates the temperature‐dependent, but not the temperature‐independent microheterogeneity. The luminescence decays of copolymers 2a and 2b and the corresponding mixtures in the absence of oxygen indicated that the temperature‐dependent microheterogeneity involves an oxygen diffusion process, whereas the temperature‐independent one appears to be inherent nature in PdTPP. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 663–670, 2010     

Artabotryols A – E,New Lanostane Triterpenes from the Seeds of Artabotrys odoratissimus

Six new lanostane triterpenes, artabotryols A, B, C1, C2, D, and E ( 1, 2, 3a, 3b, 4 , and 5 , resp.) have been isolated from the seeds of Artabotrys odoratissimus (Annonaceae). Their structures have been established as (3α,22S,25R)‐3‐hydroxy‐22,26‐epoxylanost‐8‐en‐26‐one ( 1 ), (3α,22S,25R)‐22,26‐epoxylanost‐8‐ene‐3,26‐diol ( 2 ), (3α,22S,25R,26R)‐26‐methoxy‐22,26‐epoxylanost‐8‐en‐3‐ol ( 3a ), (3α,22S,25R, 26S)‐26‐methoxy‐22,26‐epoxylanost‐8‐en‐3‐ol ( 3b ), (3α,22S,25R)‐3,22‐dihydroxylanost‐8‐en‐26‐oic acid ( 4 ) and (3α,7α,11α,22S,25R)‐3,7,11‐trihydroxy‐22,26‐epoxylanost‐8‐en‐26‐one ( 5 ) by spectroscopic studies and chemical correlations.     

X-ray-induced persistent photoconductivity in La0.9A0.1MnO3 (A=Sr, Ca)

We observed persistent photoconductivity (PPC) in La-based perovskite manganese oxides, La_0.9Sr_0.1MnO₃ (LSMO) and La_0.9Ca_0.1MnO₃ (LCMO), under X-ray irradiation. The PPC in LSMO was attributed to the collapse of the charge- and orbital-ordered (CO and OO, respectively) states, similar to that reported in previous papers. This PPC effect was different from that observed in a similar compound with a slightly different composition. This difference was explained in terms of doped carriers. This observation of PPC in LCMO is the first result of the PPC in a compound in which the ground state is not the CO phase; it was attributed to the collapse of the OO ground state. We proposed that OO ground state is a prerequisite for the occurrence of PPC in these compounds.     

Synthesis and thermal properties of cellulose-based polycaprolactones

Cellulose-based polycaprolactone (CAPCL) sheets were prepared from cellulose acetate (CA) and ϵ-caprolactone (CL). Thermal properties of the obtained CAPCL's were studied by differential scanning calorimetry (DSC), thermogravimetry (TG) and TG-Fourier transform infrared spectrometry (TG-FTIR). The glass transition temperatures (T_g 's) of CAPCL decreased with increasing CL/OH ratio, until CL/OH ratio reached 15 and then increased above that ratio. Melting of CAPCL was observed when CL/OH ratio was over 10. The thermal degradation temperatures (T_d 's) of CAPCL increased from ca. 350 °C to 390 °C with increasing CL/OH ratio. The results obtained by TG-FTIR analysis of CAPCL showed that gases with OH, CH, C=O, C-O-C groups evolved by thermal degradation.     

Synthesis, structure, and reactivity of novel 3,4-diphosphacyclobutenes bearing silyl groups

[reaction: see text] Copper-mediated homocoupling of sterically hindered 2-(2,4,6-tri-tert-butylphenyl)-1-trialkylsilyl-2-phosphaethenyllithiums afforded 1,2-bis(trialkylsilyl)-3,4-diphosphacyclobutenes (1,2-dihydrodiphosphetenes) through a formal electrocyclic [2+2] cyclization in the P=C-C=P skeleton as well as 2-trimethylsilyl-1,4-diphosphabuta-1,3-diene. Reduction of 1,2-bis(trimethylsilyl)-3,4-diphosphacyclobutenes followed by quenching with electrophiles afforded ring-opened products, (E)-1,2-bis(phosphino)-1,2-bis(trimethylsilyl)ethene and (Z)-2,3-bis(trimethylsilyl)-1,4-diphosphabut-1-ene. The structures of the ring-opened products indicated E/Z isomerization around the C=C bond after P-P bond cleavage of 5, and the isomerization of the P-C=C skeleton. Ring opening of 1,2-bis(trimethylsilyl)-3,4-diphosphacyclobutenes affording (E,E)- and (Z,Z)-1,4-diphosphabuta-1,3-dienes was observed upon desilylation.     

Protonation-induced structural change of lyotropic liquid crystals in oley- and alkyldimethylamine oxides/water systems

Lyotropic phase behavior of the nonionic and the half-ionized oleyldimethylamine oxide (OlDMAO)/water systems was investigated using polarized light microscopy, small-angle X-ray diffraction, and differential scanning calorimetry. Nonionic OlDMAO formed isotropic micellar solution, nematic, hexagonal, cubic, and lamellar liquid crystalline phases as the surfactant concentration increased. In contrast, half-ionized OlDMAO (i.e., 1:1 mixture of the nonionic and the protonated species) had a greater tendency to form bilayer structures, and the phase diagram became quite similar to those of double-chained ionic surfactants rather than single-chained ones, despite the introduction of positive charges to the nonionic one. The preference of the bilayer structures in the half-ionized OlDMAO was interpreted in terms of the dimers stabilized by the hydrogen bond between the nonionic and protonated species. For alkyldimethylamine oxides with a saturated hydrocarbon chain (CnDMAO, chain length: n = 14, 16, and 18), the phase sequence of lyotropic liquid crystals was hardly affected by the protonation, but an elongation of the cylinders of the hexagonal phase was observed for the half-ionized C14DMAO. Consequently, it can be considered that the dominant bilayer formation of the half-ionized OlDMAO is attributed to the combined effect of the hydrogen-bonded dimer formation and the cis-double-bond configuration of the alkyl chain.     

Pressure effects on the phase transition of urea adducts withn-paraffins and polyethylene

The decomposition of urea adducts with hydrocarbons is treated as a first-order phase transition and the pressure dependence is studied up to 0.7 GPa for several kinds of adducts. The thermodynamic quantities at the decomposition of the adduct can be analysed as a sum of those quantities of the component materials. The transition from the orthorhombic to the hexagonal form of the adduct with polyethylene is also investigated by X-ray diffraction and the pressure dependence of the lattice parameters is measured for the adducts. The results are compared with the phase transition in the pure paraffin.     

Cyclic esters of aliphatic diacids with pyrocatechol and hydroquinone

Cyclic esters of adipic acid, suberic acid and sebacic acid were prepared by reaction of the acid dichlorides and pyrocatechol or hydroquinone in benzene under high dilution conditions. While only the cyclic dimers could be obtained from hydroquinone, pyrocatechol formed cyclic monomers as well as cyclic dimers (and also a cyclic dimer with succinic acid). The structure of all compounds was confirmed by¹H-NMR- and mass spectra. The crystal structures of the pyrocatechol esters were determined by single crystal X-ray analysis.

---

Cyclische Ester aliphatischer Dicarbonsäuren mit Brenzcatechin und Hydrochinon

Zusammenfassung Es wurden cyclische Ester von Adipinsäure, Korksäure und Sebacinsäure durch Reaktion der entsprechenden Säure-Dichloride mit Brenzcatechin oder Hydrochinon bei hoher Verdünnung hergestellt. Während mit Hydrochinon lediglich die cyclischen Dimeren erhalten werden konnten, wurden mit Brenzcatechin sowohl cyclische Monomere als auch cyclische Dimere erhalten (ebenfalls das cyclische Dimer mit Bernsteinsäure). Die Strukturen wurden mittels¹H-NMR und Massenspektren gesichert. Die Kristallstrukturen der Brenzcatechin-Ester wurden mittels Röntgenstrukturanalyse bestimmt.

     

Adduct formation properties of mono- and bidentate phosphine oxide compounds in the liquid—liquid extraction of some divalent metals with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone

The bidentate phosphine oxide compounds bis(diphenylphosphinyl)methane (BDPPM) and bis(diphenylphosphinyl)ethane (BDPPE) were synthesized and the liquid—liquid extraction equilibria of some divalent metal ions such as Co(II), Ni(II), Zn(II) and Cd(II) with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (HPMBP) and the neutral phosphine oxide compounds were investigated. BDPPM was found to be much more powerful than BDPPE and the monodentate neutral ligand trioctylphosphine oxide (TOPO). The composition of the extracted species were determined by a graphical method to be M(PMBP)₂(TOPO)_s (s = 2 for Co, Ni, Cd and s = 1 for Zn), M(PMBP)₂(BDPPM) and M(PMBP)₂(BDPPE). The adduct formation constants between the acylpyrazolone chelates and the neutral ligands were determined and are discussed in terms of the molecular structure.     

Unified interpretation of exciplex formation and marcus electron transfer on the basis of two-dimensional free energy surfaces

The mechanism of exciplex formation proposed in a previous paper has been refined to show how exciplex formation and Marcus electron transfer (ET) in fluorescence quenching are related to each other. This was done by making simple calculations of the free energies of the initial (DA*) and final (D+A-) states of ET. First it was shown that the decrease in D-A distance can induce intermolecular ET even in nonpolar solvents where solvent orientational polarization is absent, and that it leads to exciplex formation. This is consistent with experimental results that exciplex is most often observed in nonpolar solvents. The calculation was then extended to ET in polar solvents where the free energies are functions of both D-A distance and solvent orientational polarization. This enabled us to discuss both exciplex formation and Marcus ET in the same D-A pair and solvent on the basis of 2-dimensional free energy surfaces. The surfaces contain more information about the rates of these reactions, the mechanism of fluorescence quenching by ET, etc., than simple reaction schemes. By changing the parameters such as the free energy change of reaction, solvent dielectric constants, etc., one can construct the free energy surfaces for various systems. The effects of free energy change of reaction and of solvent polarity on the mechanism and relative importance of exciplex formation and Marcus ET in fluorescence quenching can be well explained. The free energy surface will also be useful for discussion of other phenomena related to ET reactions.