Protonation-induced structural change of lyotropic liquid crystals in oley- and alkyldimethylamine oxides/water systems

Lyotropic phase behavior of the nonionic and the half-ionized oleyldimethylamine oxide (OlDMAO)/water systems was investigated using polarized light microscopy, small-angle X-ray diffraction, and differential scanning calorimetry. Nonionic OlDMAO formed isotropic micellar solution, nematic, hexagonal, cubic, and lamellar liquid crystalline phases as the surfactant concentration increased. In contrast, half-ionized OlDMAO (i.e., 1:1 mixture of the nonionic and the protonated species) had a greater tendency to form bilayer structures, and the phase diagram became quite similar to those of double-chained ionic surfactants rather than single-chained ones, despite the introduction of positive charges to the nonionic one. The preference of the bilayer structures in the half-ionized OlDMAO was interpreted in terms of the dimers stabilized by the hydrogen bond between the nonionic and protonated species. For alkyldimethylamine oxides with a saturated hydrocarbon chain (CnDMAO, chain length: n = 14, 16, and 18), the phase sequence of lyotropic liquid crystals was hardly affected by the protonation, but an elongation of the cylinders of the hexagonal phase was observed for the half-ionized C14DMAO. Consequently, it can be considered that the dominant bilayer formation of the half-ionized OlDMAO is attributed to the combined effect of the hydrogen-bonded dimer formation and the cis-double-bond configuration of the alkyl chain.     

Preparation and characterization of novel polyaryloxydiphenylsilanes with high glass transition temperature by melt polycondensation of dianilinodiphenylsilane with bisphenols

Novel polyaryloxydiphenylsilanes with reduced viscosities of 0.31–0.65 dL/g were obtained by the melt polycondensation of dianilinodiphenylsilane with three bisphenols, 2,2-bis (4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane, 3 (4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol, and 9,9-bis (4-hydroxyphenyl) fluorene, at 200–320°C in vacuo. These polymers are all amorphous and readily soluble in a wide variety of organic solvents such as chlorinated and aromatic hydrocarbons, cyclic ethers, and polar aprotic solvents. Because of their bulky and/or rigid ring structures, polyaryloxydiphenylsilanes containing diphenylhexafluoropropane, phenylindane, and diphenylfluorene units in the main chain have high glass transition temperatures of 106, 112, and 172°C, respectively. They are thermally stable showing almost no weight loss up to 350°C in air. Colorless, transparent, but brittle films are obtained from these polymers by solution casting. Ultraviolet transmission is sharply cut off by these polyaryloxydiphenylsilane films at ca. 300 nm, and the cut-off wavelength depends on the bisphenols used.     

Photochemical aromatic hydroxylation by aromatic amine N-oxides: remarkable solvent effect on NIH-shift

Photooxygenations of 4-²H-anisole ($\text{3}$) and o-xylene ($\text{5}$) by 3-methylpyridazine 2-oxide ($\text{1}$) or pyridine 1-oxide ($\text{2}$) were studied in a variety of solvents at varying irradiation temperatures. Remarkable solvent effect on NIH-shift coupled with their hydroxylation processes was observed.     

Use of pi-allyltricarbonyliron lactone complexes in the synthesis of taurospongin A: a potent inhibitor of DNA polymerase beta and HIV revers transcriptase

The total synthesis of taurospongin A by two new approaches has been achieved where pi-allyltricarbonyliron lactone complexes have been used to control highly stereoselective additions of the nucleophiles to a carbonyl unit located in the side chain of these complexes.     

Inclusion of cut and as-grown single-walled carbon nanotubes in the helical superstructure of schizophyllan and curdlan (beta-1,3-glucans)

We have found that single-chain schizophyllan and curdlan (s-SPG and s-curdlan, respectively) can dissolve as-grown and cut single-walled carbon nanotubes (ag-SWNTs and c-SWNTs, respectively) in aqueous solution. The vis-NIR spectra of the composites suggest that c-SWNTs are dissolved as a bundle, whereas ag-SWNTs exist as one or only a few pieces in the tubular hollow constructed by the helical structure inherent to these beta-1,3-glucans. EDX and CLSM measurements and TEM observation established that the distribution map of these polysaccharides overlaps well with the image of SWNTs, indicating that these two components form a composite. Very interestingly, when c-SWNTs were dissolved with the aid of s-SPG or s-curdlan in water, a clear periodical structure with inclined stripes, as detected by AFM, appeared on the fibrous composite surface. Because this periodical structure has never been recognized for the composites with other water-soluble polymers, one can regard that s-SPG or s-curdlan wraps c-SWNTs constructing a helically twined structure. High-resolution TEM observation of an ag-SWNTs/s-SPG composite gave a clearer image in that two s-SPG chains twine one ag-SWNT and the helical motif is right-handed. When this sample was subjected to the AFM measurement, the composite showed the 2-3 nm height. This height implies that one piece of ag-SWNT is included in the s-SPGs helical structure. As a summary, it has been established that beta-1,3-glucans such as s-SPG and s-curdlan not only dissolve SWNTs but also create a novel superstructure on the surface.     

The effect of minor-groove hydrogen-bond acceptors and donors on the stability and replication of four unnatural base pairs

The stability and replication of DNA containing self-pairs formed between unnatural nucleotides bearing benzofuran, benzothiophene, indole, and benzotriazole nucleobases are reported. These nucleobase analogues are based on a similar scaffold but have different hydrogen-bond donor/acceptor groups that are expected to be oriented in the duplex minor groove. The unnatural base pairs do not appear to induce major structural distortions and are accommodated within the constraints of a B-form duplex. The differences between these unnatural base pairs are manifest only in the polymerase-mediated extension step, not in base-pair stability or synthesis. The benzotriazole self-pair is extended with an efficiency that is only 200-fold less than a correct natural base pair. The data are discussed in terms of available polymerase crystal structures and imply that further modifications may result in unnatural base pairs that can be both efficiently synthesized and extended, resulting in an expanded genetic alphabet.     

Synthesis of aromatic polythioamide-oxothioxoquinazolines from bis(1,3,4-thiadiazoline-5-thione) and aromatic bis-o-amino esters

Aromatic polythioamide-oxothioxoquinazolines were synthesized by the polycondensation of 2,2′-(m-phenylene)bis-1,3,4-thiadiazoline-5-thione with aromatic bis-o-amino esters. The polymerizations were carried out at 160°C in acidic media such as m-cresol, sulfolane, and polyphosphoric acid to produce polymers with reduced viscosities up to 0.5 dL/g. These polymers were soluble in polar aprotic solvents like N-methyl-2-pyrrolidone and some acidic media including m-cresol. The polythioamide-oxothioxoquinazolines showed relatively good thermal stability with 10% weight loss at 344–394°C in air.     

Novel ring transformation of quinolines to indole derivatives in two steps via 1,4-dihydroquinoline derivatives

Diphenyl 1-phenoxycarbonyl-1,4-dihydroquinoline-4-phosphonates 5c-g, obtained from the reaction of corresponding quinoline derivatives 1 with phenyl chloroformate and triphenyl phosphite in one step, were ozonized in CHCl₃ and CH₃COOH. Treatment of the resulting mixture with NaHCO₃ produced the 3-formyl-1-phenoxycarbonylindole derivatives 8a-e in high yields. The ring transformation of quinolines 1 to indoles 8 proceeds under mild conditions.     

Double percolation effect on the electrical conductivity of conductive particles filled polymer blends

Electrical conductivity of carbon black (CB) filled polymer blends which are incompatible with each other was studied as a function of the polymer's blend ratio. Transmission electron microscope (TEM) analysis shows that CB distributes unevenly in each component of a polymer blend. TEM photographs of phase structure of solvent extracted HDPE/PMMA blend and solvent extraction experiments of PMMA/PP blend detect the blend ratio at which the structural continuity of filler rich phase is formed. The electrical conductivity of polymer blends is found to be determined by two factors. One is the concentration of CB in the filler rich phase and the other is the structural continuity of this phase. This double percolation affects the conductivity of conductive particle filled polymer blends.