Fractionation of phosphopeptides on strong anion‐exchange capillary trap column for large‐scale phosphoproteome analysis of microgram samples

It is one of the key issues to develop powerful fractionating method to increase the identification of the low‐abundance phosphopeptides. In this study, a semi‐online 2‐D LC separation strategy based on three‐step fractionation of the enriched peptides on strong anion‐exchange trap column was developed. It was demonstrated that the sensitivity and phosphoproteome coverage obtained by this fractionating method with strong anion‐exchange trap column is much higher than those by the conventional methods based on C18 trap column. In addition, when the same amount of sample was loaded, the number of identified phosphopeptides had increased 108%. Combination of this three‐step fractionation method with RPLC‐MS/MS analysis by 300 min RP‐gradient separation was applied to phosphoproteome analysis of human liver proteins, and 853 unique phosphopeptides was positively identified from 500 μg tryptic digest of human liver proteins. After three cycles' consecutive analyses, 1554 unique phosphopeptides and 1566 phosphorylated sites were totally identified from 735 phosphorylated proteins at a false discovery rate of <1% in about 54 h of analysis time.     

MEKC determination of IgG in human serum via a pH‐mediated acid stacking method

An on‐column preconcentration technique, pH‐mediated acid stacking, was used in this study to improve the sensitivity of MEKC‐UV analysis of IgG in human serum. Various parameters affecting pH‐mediated acid stacking were optimized systematically. To eliminate the matrix interferences of human serum and to combine the sample pretreatment procedure with the detection methodology, silica‐coated Fe₃O₄ magnetic nanoparticles modified with N‐(2‐aminoethyl)‐3‐aminopropyl‐trimethoxysilane were prepared and employed as solid phase extraction adsorbent to remove the abundant HSA from human serum. HSA was quantitatively removed by silica‐coated Fe₃O₄ magnetic nanoparticles modified with N‐(2‐aminoethyl)‐3‐aminopropyl‐trimethoxysilanes without retaining IgG at pH 9.3. Under the optimum conditions, the sensitivity of IgG was improved 40.3‐fold using a 100 s electrokinetic injection as compared with a 6 s hydrodynamic injection. The detection limit of IgG was found to be 0.1 mg/L, and the proposed method was successfully applied for the determination of IgG in human serum with satisfactory results.     

An experimental and computational investigation on the fragmentation behavior of enaminones in electrospray ionization mass spectrometry

The dissociation pathways of protonated enaminones with different substituents were investigated by electrospray ionization tandem mass spectrometry (ESI‐MS/MS) in positive ion mode. In mass spectrometry of the enaminones, Ar? CO? CH?CH? N(CH₃)₂, the proton transfers from the thermodynamically favored site at the carbonyl oxygen to the dissociative protonation site at ipso‐position of the phenyl ring or the double bond carbon atom adjacent to the carbonyl leading to the loss of a benzene or elimination of C₄H₉N, respectively. And the hydrogen? deuterium (H/D) exchange between the added proton and the proton of the phenyl ring via a 1,4‐H shift followed by hydrogen ring‐walk was witnessed by the D‐labeling experiments. The elemental compositions of all the ions were confirmed by ultrahigh resolution Fourier transform ion cyclotron resonance tandem mass spectrometry (FTICR‐MS/MS). The enaminones studied here were para‐monosubstituted on the phenyl ring and the electron‐donating groups were in favor of losing the benzene, whereas the electron‐attracting groups strongly favored the competing proton transfer reaction leading to the loss of C₄H₉N to form a benzoyl cation, Ar‐CO⁺. The abundance ratios of the two competitive product ions were relatively well‐correlated with the σ_p⁺ substituent constants. The mechanisms of these reactions were further investigated by density functional theory (DFT) calculations. Copyright © 2010 John Wiley & Sons, Ltd.     

Novel soluble fluorinated poly(ether imide)s with different pendant groups: Synthesis,thermal, dielectric,and optical properties

Three types of new bis(ether dianhydride) monomers, [4,4′‐(2‐(3′‐methylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4a)], [4,4′‐(2‐(3′‐trifluoromethylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4b)], and [4,4′‐(2‐(3′,5′‐ditrifluoromethylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4c)] were prepared via a multistep reaction sequence. Three series of soluble poly(ether imide)s (PEIs) were prepared from the obtained dianhydrides by a two‐step chemical imidization method. Experimental results indicated that all the PEIs had glass transition temperature in the range of 200–230 °C and the temperature of 5% weight loss in the range of 520–590 °C under nitrogen. The PEIs showed excellent solubility in a variety of organic solvents due to introduction of the bulky pendant groups and were capable of forming tough films. The casting films of PEIs (80–91 μm in thickness) had tensile strengths in the range from 88 to 117 MPa, tensile modulus from 2.14 to 2.47 GPa, and elongation at break from 15 to 27%. The casting films showed UV‐Vis absorption edges at 357–377 nm, low dielectric constants of 2.73–2.82, and water uptakes lower than 0.66 wt %. The spin‐coated films of PEIs presented a minimum birefringence value as low as 0.0122 at 650 nm and low optical absorption at the optical communication wavelengths of 1310 and 1550 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3281–3289, 2010     

Multistimuli‐responsive hyperbranched poly(ether amine)s

Multistimuli‐responsive hyperbranched poly(ether amine)s (hPEAs) were successfully synthesized through nucleophilic addition/ring‐opening reaction of commercial diglycidyl ether and amine via one‐pot synthesis. In aqueous solution, these hPEAs exhibited very sharp response to temperature, pH, and ionic strength, with well‐tunable cloud point (CP). Through changing the poly(ethylene oxide) (PEO) chain content of hPEAs, pH, and ionic strength, the CP could be adjustable from 35 to 100 °C, and increased with the increasing of PEO content, the decreasing of pH and ionic strength. The CP of hPEAs aqueous solution presents a linear relationship to the PEO content in pH range from 6.6 to 8.0. Dynamic light scattering (DLS) investigation indicated that these hPEAs dispersed in aqueous solution to form the stable nanomicelles, whose aggregation can be controlled by temperature, pH, and ionic strength. Moreover, the obtained hPEAs contain reactive amino groups in periphery and hydroxyl groups inside, which can be further functionalized. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4252–4261, 2010     

Mimicking “nascent” Cu(0) mediated SET‐LRP of methyl acrylate in DMSO leads to complete conversion in several minutes

Cu(0) was prepared via disproportionation of Cu(I)Br in the presence of Me₆‐TREN in various solvents in a glove box. The resulting nanopowders were used as mimics of “nascent” Cu(0) catalyst in the single‐electron transfer living radical polymerization (SET‐LRP) of methyl acrylate (MA), providing faster polymerization than any commercial Cu(0) powder, Cu(0) wire, or Cu(I)Br and achieving 80% conversion in only 5 min reaction time. Despite the high rate, a living polymerization was observed with linear evolution of molecular weight, narrow polydispersity, no induction period, and high retention of chain‐end functionality. In addition to providing an unprecedentedly fast, yet controlled LRP of MA, these studies suggest that the very small “nascent” Cu(0) species formed via disproportionation in SET‐LRP are the most active catalysts. Thus, when bulk Cu(0) powder or wire may be the most abundant catalyst and dictates the overall kinetics, any Cu(0) produced via disproportionation will be rapidly consumed and contributes to the overall catalytic cycle. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 403–409, 2010     

Fabrication of Bienzymatic Glucose Biosensor Based on Novel Gold Nanoparticles‐Bacteria Cellulose Nanofibers Nanocomposite

An exploration of gold nanoparticles–bacterial cellulose nanofibers (Au‐BC) nanocomposite as a platform for amperometric determination of glucose is presented. Two enzymes, glucose oxidase (GOx) and horseradish peroxidase (HRP) were immobilized in Au‐BC nanocomposite modified glassy carbon electrode at the same time. A sensitive and fast amperometric response to glucose was observed in the presence of electron mediator (HQ). Both of GOx and HRP kept their biocatalytic activities very well in Au‐BC nanocomposite. The detection limit for glucose in optimized conditions was as low as 2.3 µM with a linear range from 10 µM to 400 µM. The biosensor was successfully applied to the determination of glucose in human blood samples.     

Synthesis and computational oxidation mechanism study of novel organosoluble aramids with high modulus by low‐temperature solution polycondensation

A series of highly organosoluble polyamides with high modulus having propeller‐shaped triarylamine were synthesized using aromatic diacid chlorides by low‐temperature solution polycondensation. The polyamide films had strong, tough, flexible, and amorphous properties. These polymers revealed electrochromic characteristics both in the visible range and near‐infrared (NIR) region, with a color change from pale yellowish at its neutral state to green and blue at its oxidized state at applied potentials ranging from 0.00 to 1.35 V. Cyclic voltammetry (CV) of the polymer films cast onto an indium tin oxide (ITO)‐coated glass substrate exhibited two reversible redox couples at potentials of 0.80–0.87 V and 1.19–1.25 V, respectively, vs. Ag/Ag⁺ in acetonitrile solution. From the combination of the experimental and computational study, we proposed an oxidation mechanism based on molecular orbital (MO) theory, which well explains the CV experimental result. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Two Coordination Polymers Constructed from Pillared M–O (M = Na+ or Ba2+) Subunits with 3‐Formyl‐4‐hydroxybenzenesulfonic Acid as Ligand

Two new coordination polymers, [Na(H₂L)(H₂O)₂]_n ( 1 ) and [Ba(H₂L)₂(H₂O)]_n ( 2 ) (H₃L = 3‐formyl‐4‐hydroxybenzenesulfonic acid) were synthesized and structurally characterized. The H₂L^– ligand shows three different bridging modes, μ₃ in 1 , μ₃ and μ₄ in 2 . Compound 1 presents a 2D pillared structure, whereas 2 forms a 3D framework. Both 1 and 2 show blue luminescence at 380 nm in aqueous solution, however, their solid state emissions are at 406 and 446 nm, respectively.     

Nature of the near‐IR band in the electronic absorption spectra of neutral bis(tetrapyrrole) rare earth(III) complexes: Time‐dependent density functional theory calculations

The nature of the near‐IR band in the electronic absorption spectra of bis(tetrapyrrole) rare earth(III) complexes Y(Pc)₂ (1), La(Pc)₂ (2), Y(Pc)(Por) (3), Y(Pc)[Pc(α‐OCH₃)₄] (4), Y(Pc)[Pc(α‐OCH₃)₈] (5), and Y(Pc)[Pc(β‐OCH₃)₈] (6) was studied on the basis of time‐dependent density functional theory (TD‐DFT) calculations. The electronic dipole moment along the z‐axis in the electronic transition of the near‐IR band in all the studied neutral bis(tetrapyrrole) yttrium(III) and lanthanum(III) double‐deckers is well explained on the basis of the composition analysis of the orbitals involved. The electronic transition in the near‐IR band causes the reversion of the orbital orientation of one tetrapyrrole ring in both homoleptic and heteroleptic bis(tetrapyrrole) rare earth complexes and induces electron transfer from the tetrapyrrole ring with lower orbital energy to the other ring in the heteroleptic bis(tetrapyrrole) rare earth(III) complexes. The near‐IR band can work as an ideal characteristic absorption band to reflect the π–π interaction between the two tetrapyrrole rings in bis(tetrapyrrole) rare earth(III) double‐decker complexes because of its peculiar electronic transition nature. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010