Compare study between smoothing efficiencies of epicyclic motion and orbital motion

The smoothing efficiencies of epicyclic motion and orbital motion in CCOS (computer controlled optical surfacing) were compared. CCOS polishing can smooth out mid-to-high spatial frequency errors which are smaller than tool size on optical mirrors due to the rigidity of polishing tools. The smoothing efficiencies of epicyclic motion and orbital motion with pitch lap and RC lap were compared and the result proved pitch lap with epicyclic motion smoothed ∼1.6 times faster than pitch lap with orbital motion while RC lap with epicyclic motion smoothed ∼1.85 times faster than RC lap with orbital motion.     

Pyridine-thermal synthesis and high catalytic activity of CeO2/CuO/CNT nanocomposites

Carbon nanotubes (CNTs) were controllably coated with the uninterrupted CuO and CeO₂ composite nanoparticles by a facile pyridine-thermal method and the high catalytic performance for CO oxidation was also found. The obtained nanocomposites were characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction as well as X-ray photoelectron spectroscopy. It is found that the CuO/CeO₂ composite nanoparticles are distributed uniformly on the surface of CNTs and the shell of CeO₂/CuO/CNT nanocomposites is made of nanoparticles with a diameter of 30-60 nm. The possible formation mechanism is suggest as follows: the surface of CNTs is modified by the pyridine due to the π-π conjugate role so that the alkaline of pyridine attached on the CNT surface is more enhanced as compared to the one in the bulk solvent, and thus, these pyridines accept the proton from the water molecular preferentially, which result in the formation of the OH⁻ ions around the surface of CNTs. Subsequently, the metal ions such as Ce³⁺ and Cu²⁺ in situ react with the OH⁻ ions and the resultant nanoparticles deposit on the surface of CNTs, and finally the CeO₂/CuO/CNT nanocomposites are obtained. The T₅₀ depicting the catalytic activity for CO oxidation over CeO₂/CuO/CNT nanocomposites can reach ∼113 °C, which is much lower than that of CeO₂/CNT or CuO/CNT nanocomposites or CNTs.     

嵌段共聚物/均聚物共混体系的结晶行为 I. 非球状共聚物胶束的作用

将Leibler, Whitmore和Mayes等近期关于非晶嵌段共聚物“稀固体溶液”的理论应用于嵌段聚共聚物结晶型“稀固体溶液”结晶行为的研究。发现球状共聚物胶束既可起成核剂作用, 也可起抑制成核作用。报导了当共聚物胶束由球形变为非球形时, 共聚物胶束的上述作用都会发生较大的变化, 并根据Leibler和Mayes分别提出的球形和非球形胶束理论解释了这一实验现象。     

基于平面超材料的Fano谐振可调谐研究

基于两段相同金属分裂环谐振器构成的单层结构, 从理论及实验方面研究了平面超材料的可调谐Fano谐振. 实验测量了平面超材料对TE和TM入射波的电磁响应, 利用电磁波的入射角度控制Fano谐振的强度, 实现了谐振的开关特性, 谐振频率红移可达到21%. 基于有限元法给出了平面超材料的场分布, 强的正常色散表明平面超材料的电磁响应可类比经典电磁诱导透明现象, 仿真与实验结果相符合. 对称结构超材料Fano谐振的开/关特性为超材料性能的可调谐控制提供了有效途径.     

基于RBF神经网络的较低浓度下同步荧光光谱的溢油鉴别

针对海面溢油样品的含量难以确定,同时考虑到海水掺杂及风化等问题的影响,提出了在较低非线性浓度范围内采集溢油嫌疑样品的同步荧光光谱,获取其训练样本集,利用主成分分析法(Principal com-ponent analysis,PCA)提取其特征光谱,结合径向基函数(Radial basis function,RBF)神经网络对肇事样本和嫌疑样本进行模式识别的方法。通过对相近油源原油样品分类识别研究表明:该方法仅需单次对肇事样本同步光谱测量,再借助数据分析,就可以很好区分相近油源溢油样品,外扰对识别率影响也不大。RBF神经网络算法识别率在92%左右。该结论对海洋环境中溢油的实时检测及油指纹数据信息库的建立有重要意义。     

嫦娥一号干涉成像光谱仪(IIM)2C级数据信息提取

通过分析Chang’E-1卫星所获取的高光谱数据的太阳高度角因素,选取了太阳高度角较高的IIM2C数据进行光谱定标。采用邻域平均法及邻域加权均值法对原始数据进行了杂点、条带修复。由于干涉成像光谱仪CCD阵列增益畸变以及它的自身问题使得干涉影像存在横向响应不均一性,提出采用基于子空间最大特征值法进行校正,结果影像亮度统计其强度表现均一,符合自然图像特征,并采用自编程序进行几何校正。运用国际上较为成熟的经验线性法对Chang’E-1IIM 2C数据进行绝对定标;与此同时,为了修正线性定标的偏置系数及降低数据噪声,首次采用自适应小波变换法对辐射定标后数据进行后处理,确定了IIM2C数据可用波段。通过对比国际标准定标点数据,制订了嫦娥IIM2C数据分析方案,完成了第一幅完整的Chang’E-1IIM 2C月球正面反射率影像。     

10－5000 伏下电子被多原子分子CF4, CF3H, C2F4, C2F6, 及 C2H3F3散射总结面的计算

利用可加性规则和光学势方法计算了能量在10-5000 eV范围内电子被多原子分子CF4, CF3H, C2F4, C2F6, 及 C2H3F3的总结面，并与已有的实验结果和理论计算进行了比较，与这些结果符合得很好。对于CF4, CF3H, C2F4, C2F6, 及 C2H3F3在1000eV以上没有实验数据，本文对实验研究提供了对比和预测的数据。     

Total cross sections for electrons scattering from simple molecules containing the larger atom sulfur at 30-5000eV

A complex optical model potential modified by the concept of bonded atom, which takes into consideration the overlapping effect of electron clouds, is employed to calculate the total cross sections for electrons scattering from simple molecules （SO2, H2S, OCS, CS2 and SO3） containing the larger atom, sulfur, at 30-5000eV by using the additivity rule model at Hartree-Fock level. The quantitative molecular total cross section results are compared with those obtained in experiments and other calculations wherever available, and good agreement is obtained. It is shown that the additivity rule model together with the complex optical model potential modified by the concept of bonded atom can give the results closer to the experiments than the one unmodified by it. So, the introduction of bonded-atom concept in complex optical model potential betters the accuracy of the total cross section calculations of electrons from the molecules containing the larger atom, sulfur.     

Four-channel coarse WDM for inter- and intra-satellite optical communications

A polymer volume grating-based four-channel coarse wavelength division multiplexer (WDM) for inter- and intra-satellite optical communication application is reported for the first time. This compact four-channel WDM device working at 0.83, 1.06, 1.34 and 1.55 μm is designed to build a complete optical link between two satellites, where wavelengths of 0.83 and 1.55 μm are used for data stream channels, 1.06 and 1.34 μm are used for inter- and intra-satellite connection. It is for the first time reported that a WDM device can cover such a large wavelength range in a single substrate. For transverse electric (TE) wave, the channel efficiencies at 0.83, 1.06, 1.34 and 1.55 μm are 55%, 40%, 35% and 45%, respectively. Channel efficiencies for transverse magnetic (TM) waves are 20% lower than those of TE waves on average. Wavelength shifts due to Doppler effect, temperature variations and radiation effects in space can be adequately accommodated.     

Effects of hydroxyls on the structural and room temperature ferromagnetic properties of Co doped SnO2 nanoparticles

Co doped SnO₂ nanoparticles have been prepared via a wet chemical method with different precipitation processes. The structure and morphology of Co doped SnO₂ nanoparticles demonstrate that the nanoparticles are in a rutile single phase and uniform, respectively. X-ray photoelectron spectroscopy shows that the Co dopants are in 2+ oxidation valence state and doped ∼2 atm% in SnO₂ nanoparticles. Moreover, Raman spectroscopy further confirms that Co doped SnO₂ nanoparticles have single phase crystallinity without forming any extra modes related to secondary phases. The magnetic measurements reveal that all nanoparticles exhibit room temperature ferromagnetism (RTFM) due to the presence of disorders and defects introduced by hydroxyls in the crystal structure. In addition, it has been clearly observed that the saturated magnetic moments are strongly affected by the precipitation processes which control the incorporation of hydroxyls into the lattice.