环境扫描电镜及其应用

叙述了环境扫描电镜（ＥＳＥＭ）的成像原理———电子信号气体放大原理及其与常规扫描电镜（ＳＥＭ）的区别，介绍了我国第一台带高温台的ＥＳＥＭ．综述了近年来国外学者应用ＥＳＥＭ开展的一些研究工作．介绍了中国科学院化工冶金研究所应用ＫＹＫＹ１５００型ＥＳＥＭ对金属表面氧化反应中晶须／晶粒生长过程的研究     

求解定常不可压Stokes方程的两层罚函数方法

借助于两套有限元网格空间提出了一种求解定常不可压Stokes方程的两层罚函数方法.该方法只需要求解粗网格空间上的Stokes方程和细网格空间上的两个易于求解的罚参数方程（离散后的线性方程组具有相同的对称正定系数矩阵）.收敛性分析表明粗网格空间相对于细网格空间可以选择很小，并且罚参数的选取只与粗网格步长和问题的正则性有关.因此罚参数不必选择很小仍能够得到最优解.最后通过数值算例验证了上述理论结果，并且数值对比可知两层罚函数方法对于求解定常不可压Stokes方程具有很好的效果.     

Highly sensitive bend sensor with hybrid long-period and tilted fiber Bragg grating

We demonstrate a new type of fiber optic bend sensor with a hybrid structure made up of a long period grating (LPG) and a tilted fiber Bragg grating (TFBG). The sensing mechanism is based on the spectrum of power transfers between the core and cladding modes from a TFBG located downstream from a LPG. We show that the curvature of a beam can be determined by the reflected power difference between the core mode and the recoupled cladding modes. We further provide design rules for the LPG and TFBG to optimize and linearize the sensor response. In addition, the temperature cross-sensitivities of this configuration are also investigated for two different types of fiber.     

Highly improved crystallization behavior of poly(L‐lactide) induced by a novel nucleating agent: substituted‐aryl phosphate salts

In this work, a novel nucleating agent (NA) based on substituted‐aryl phosphate salts was introduced into poly(L‐Lactide) (PLLA). The nonisothermal and isothermal crystallization behaviors of nucleated PLLA samples were investigated through differential scanning calorimetry (DSC), wide angle X‐ray diffraction, and polarized optical microscope (POM). Furthermore, the effect of annealing treatment on the cold crystallization behaviors of nucleated samples was also investigated. The results show that the crystallization of PLLA, whether for the melt crystallization (including nonisothermal and isothermal crystallization process) or for the cold crystallization (including the cold crystallization occurring during the DSC heating process and during the annealing process), is greatly dependent upon the content of NA. At relatively lower NA content (≤0.1 wt%), the nucleation effect of NA is inconspicuous, however, at higher NA content (≥0.2 wt%), it exhibits great nucleation effect for the crystallization of PLLA. Further results show that the double endothermic peak of PLLA depends on the temperature applied for the crystallization. Copyright © 2012 John Wiley & Sons, Ltd.     

Design, synthesis and insecticidal activity of novel anthranilic diamides with benzyl sulfide scaffold

A series of novel anthranilic diamides with benzyl sulfide scaffold were synthesized,in which N-pyridylpyrazole moiety generally regarded as key pharmacophore was abandoned.The target compounds were characterized by ¹H NMR,¹³C NMR,¹⁹F NMR and HRMS.The preliminary bioassays indicated that half of the title compounds were endowed with good insecticidal activities against armyworm（Mythimna sepatara） at the concentration of 500 mg/L,Exhilaratingly,the synthesized compound 3a was also active against Tetranychus cinnabarinus at 100 mg/L.The difference in activities between the target compounds was influenced by the substituents,which provided some hints for further investigation on structure modifications.     

Fast Determination of Phenanthrene in Soil by Gas Chromatography-Mass Spectrometry Using Chemometric Resolution and Standard Addition Method

A method for fast determination of the component in complex samples by using gas chromatography‐mass spectrometry (GC‐MS) was developed and used for quantitative analysis of phenanthrene in soils. In the method, window independent component analysis (WICA) was used for resolving the mass spectrum and non‐negative immune algorithm (NNIA) was employed for obtaining the chromatographic profile. Therefore, spectral and chromatographic information of a specific component can be obtained from the measured GC‐MS data of overlapping and high background. Six soil samples collected from different places were analyzed. The tedious pretreatments in preparing the samples and the elution in the separation were simplified for speeding up the analysis. Due to the complexity of the matrix, standard addition method was adopted for the final quantification. The applicability of the method was validated with a spiked sample and the results of the six samples are reasonable.     

超声波辅助萃取同位素稀释质谱法测定聚氯乙烯中6种邻苯二甲酸酯

采用超声波辅助萃取同位素稀释质谱法测定聚氯乙烯中6种邻苯二甲酸酯的含量。以四氢呋喃为溶剂对样品进行超声波辅助提取后,加入甲醇对聚合物进行沉淀,取上清液,经冷冻离心后进行气相色谱一质谱分析,并采用氘代邻苯二甲酸酯为内标,单点校正法定量。该方法应用于中、日、韩计量比对的样品测定中,两天进行的6次测定结果相对标准偏差为0．7％～3．0％。最终比对结果显示3个国家的数据取得很好的一致性,除DEP相对标准偏差为2．4％以外,其它5种邻苯二甲酸酯相对标准偏差为0．7％～1．2％,测定结果的相对扩展不确定度为1．8％～4．9％,证明该方法准确、可靠。     

Modeling and Simulation of Bonding and Optical Characters of Ternary Nanocrystals

In this paper, conformations of the ternary structures ZnSe(Te), ZnS(Te), ZnS(Se), CdSe(Te), CdS(Te) and CdS(Se) were optimized, and their orbital, spectra have been investigated at the B3LYP/LANL2DZ level. First, we have found some rules which agreed with experimental results. HOMO–LUMO gaps, WBI values and the wavelengths of the absorption peaks of ternary structures changed gradually with the ratio of Te, Se and S atoms in ternary structures. Second, analysis of Raman spectra revealed that doped structures had the spectra of two relevant binary clusters. Namely, Raman spectra of ternary ZnSe(Te) clusters had the Raman peaks of ZnSe and ZnTe. In this way, with the help of the Raman spectra, the formations of the ternary structures can be determined in experiment. This was important to estimate during synthesis progress. Finally, calculated results have proved that ZnS and CdS structures had the shorter wavelengths of the absorption peaks, the higher excited energies of singlets, and good stability.