Reaction of singlet oxygen with some benzylic sulfides

Product distribution, total quenching rate (k_T), and rate of chemical reaction (k_r) with singlet oxygen have been determined for some alkyl, benzyl, α-methylbenzyl, and cumyl sulfides. Their contributions depend on the steric hindering around the sulfur atom. In protic solvents, the sulfoxide is the main product via a hydrogen-bonded persulfoxide. In apolar solvents, intramolecular α-H abstraction leads to oxidative C-S bond cleavage, with varying efficiency. The behavior of sulfides is compared to that of alkenes and amines.     

Stereoselective syntheses of 1,4-dideoxy-1,4-imino-octitols and novel tetrahydroxyindolizidines

A new route for the preparation of four new indolizidines, (1R,2S,6S,7S,8aS)- and (1R,2S,6R,7R,8aS)-1,2,6,7-tetrahydroxyindolizidine (30 and 32) and (1S,2R,7S,8S,8aR)- and (1S,2R,7R,8R,8aR)-1,2,7,8-tetrahydroxyindolizidine (44 and 46), is reported. The synthesis is based on Knoevenagel homologation of the readily available enantiomerically pure pyrrolidin-carbaldehydes 13 and 37followed by asymmetric dihydroxylation of the subsequent alkenyl pyrrolidines and cyclization of the corresponding imino-octitols. The new indolizidines and their precursors (imino-octitols 20, 25, 26) and indolizidinones 28a and 28b have been tested for inhibitory activities toward 26 glycosidases. The enzymatic inhibition of trans-7-hydroxy-d-(-)-swainsonine (44) toward alpha-mannosidases is similar to that described for trans-7-hydroxy-l-(+)-swainsonine (11b) toward naringinase (alpha-l-rhamnosidase from Penicillium decumbens).     

UVB irradiation of normal human skin favors the development of type-2 T-cells in vivo and in primary dermal cell cultures

To determine the effect of UVB exposure on the balance of type-1 or type-2 T-cells in skin, we examined the expression of key markers interferon (IFN)-gamma and interleukin (IL)-4 in cryostat sections. IFN-gamma mRNA was clearly detectable in nonirradiated control skin, and IFN-gamma protein was found in 2% of the dermal CD3pos T-cells, whereas IL-4 mRNA was hardly detectable, and no IL-4 protein was found. In contrast, IL-4 mRNA expression increased upon irradiation, and IL-4 was found in 2% of the T-cells at day 2 after UVB-exposure. Concomitantly, IFN-gamma mRNA expression decreased, and IFN-gamma protein became absent. We also analyzed T-cells present in primary dermal cell cultures, which were used as an in vitro equivalent of the in vivo situation. As compared with T-cells from control skin, T-cells in dermal cell cultures from UVB-exposed skin displayed an increased IL-4 and decreased IFN-gamma expression. No such skewing occurred when the T-cells from irradiated skin were cloned in the absence of a dermal microenvironment. Except for an occasional positive T-cell, type-1-associated cell-surface markers (CCR5, CXCR3) or type-2 markers (CCR3, CD30, CRTH2) were undetectable in situ. But these markers were expressed on cultured dermal T-cells from UVB-exposed and control skin at a comparable level, but did not correlate with the IFN-gamma and IL-4 production. Altogether, UVB-induced changes of the dermal microenvironment favor the development of type-2 T-cells.     

Fractionation and redox speciation of antimony in agricultural soils by hydride generation--atomic fluorescence spectrometry and stability of Sb(III) and Sb(V) during extraction with different extractant solutions

This stability of Sb(III) and Sb(V) species was studied during single extraction from soils by water. EDTA, diluted H2SO4 and H3PO4, and oxalic acid/oxalate solutions, with and without ascorbic acid, were used as stabilizing reagent of both Sb species. Antimony redox speciation in soil extracts was performed by selective hydride generation-atomic fluorescence spectrometry. Simulated extraction procedures (without soil) showed that, except in oxalate medium, Sb(III) was oxidized to Sb(V), and this reaction was avoided with ascorbic acid. Recovery studies from a spiked agricultural soil showed that no oxidation but sorption of Sb(III) occurred during the extraction process in water and H2SO4 medium, and quantitative oxidation in EDTA and oxalate medium. With ascorbic acid, this oxidation was totally avoided in EDTA and partially avoided in oxalate solution. A new sequential extraction procedure was proposed and applied to the fractionation and redox speciation of antimony in agricultural soils, using EDTA + ascorbic acid, pH 7 (available under complexing and moderately reducible conditions); oxalic acid/oxalate + ascorbic acid (extractable in reducible conditions) and HNO3 + HCl + HF (residual fraction). The proposed extraction scheme can provide information about the availability and mobility of antimony redox species in agricultural soils.     

A discussion on the energies involved in specific adsorption of ions

The change in specific adsorption of I^? ions on the series of metals Au, Hg, Bi, Pb, Cd, and Ga is analyzed using data of specifically adsorbed charge and shift in potential of zero charge. Factors determining the change in adsorbability are discussed in the light of previous formulations. It is shown that the work connected with water desorption as an ion becomes adsorbed, usually neglected or underestimated in previous discussions, is very likely to be the main factor determining the change in adsorbability along the series of metals. A rough estimation of energies involved in water desorption suggests that metal—water surface bonds are probably weak on sp-metals so that they are unable to affect the reactivity of metal surfaces with respect to the gas phase as strong covalent surface bonds are involved, for instance in the hydrogen evolution reaction. Conversely, the strong effect of water desorption on the specific adsorption of ions may be an indication of ion—metal interactions to be substantially independent of the nature of the metal. This suggests that covalent contributions to the surface bond are apparently minor for metals more electropositive than Au.     

A simple and fast micromethod for the analysis of polychlorinated biphenyls in air by sorbent enrichment and ultrasound-assisted solvent extraction

A combination of sorbent enrichment and ultrasound-assisted solvent extraction has been used to determine polychlorinated biphenyls in air. Analytes were sampled by pumping a known volume of air through a porous polymer (Tenax TA). The enriched adsorbent was transferred into a glass vial, and ultrasound-assisted extraction of the analytes was then performed in n-hexane. Quantification was carried out by using gas chromatography coupled to tandem mass spectrometry. Breakthrough volume of the sampling step was studied, indicating that 10 m³ of air could be processed without losses of the most volatile compounds. Good recoveries (75–96%) were obtained, and limits of detection at the sub ng m^–3 were achieved for all the analytes. The proposed method is very simple and fast, avoiding the use of large solvent volumes and time-consuming preconcentration steps.     

Field-amplified sample stacking and nonaqueous capillary electrophoresis determination of complex mixtures of polar aromatic sulfonates

Nonaqueous CE and field-amplified sample stacking have been used in the determination of complex mixtures of polar aromatic sulfonates (AS; mainly benzene- and naphthalenesulfonates) of environmental concern. The analytical procedure consists of an on-column aqueous sample enrichment, followed by the nonaqueous electrophoretic determination of stacked aromatic sulfonates. Various organic solvents were used as separation medium, acetonitrile and N-methylformamide gave the best results. Optimum capillary electrophoresis separation is obtained with ammonium acetate (25 mM) dissolved in N-methylformamide-methanol (90:10) as background electrolyte. This combined method was applied to the analysis of surface water samples spiked with selected aromatic sulfonates derivatives.     

Low oxidation state ruthenium chemistry : IV. The reactions of M(CO)2(PPh3)3 complexes (M = Fe,Ru) and the hydrogenation and isomerization of alkenes catalyzed by RuL(CO)2(PPh3)2 (L = H2, PPh3)

The complexes M(CO)₂(PPh₃)₃ (I, M = Fe; II, M = Ru) readily react with H₂ at room temperature and atmospheric pressure to give cis-M(H)₂(CO)₂(PPh₃)₂ (III, M = Fe;IV,M = Ru). I reacts with O₂ to give an unstable compound in solution, in a type of reaction known to occur with II which leads to cis-Ru(O₂)(CO)₂(PPh₃)₂(V). Even compound IV reacts with O₂ to give V with displacement of H₂; this reaction has been shown to be reversible and this is the first case where the displacement of H₂ by O₂ and that of O₂ by H₂ at a metal center has been observed. III and IV are reduced to M(CO)₃(PPh₃)₂ by CO with displacement of H₂; Ru(CO)₃- (PPh₃)₂ is also formed by treatment of IV with CO₂, but under higher pressure. Compounds II and IV react with CH₂CHCN to give Ru(CH₂CHCN)(CO)₂- (PPh₃)₂(VI) which reacts with H₂ to reform the hydride IV.cis-Ru(H)₂(CO)₂(PPh₃)₂(IV) has been studied as catalyst in the hydrogenation and isomerization of a series of monoenes and dienes. The catalysts are poisoned by the presence of free triphenylphosphine. On the other hand the ready exchange of H₂ and O₂ on the “Ru(CO)₂(PPh₃)₂” moiety makes IV a catalyst not irreversibly poisoned by the presence of air. It has been found that even Ru(CO)₂(PPh₃)₃(II) acts as a catalyst for the isomerization of hex-1-ene at room temperature under an inert atmosphere.     

A facile access to ureido sugars. Synthesis of urea-bridged β-cyclodextrins

The preparation of a urea-bridged β-cyclodextrin dimer and of a 6-monodeoxy-6-mono[3-(β-d-glucopyranos-2-yl)ureido]-β-cyclodextrin has been developed, using triphosgene as the isocyanation agent in an aqueous two-phase system. Per-O-acetylated β-d-gluco and mannopyranosylamines and 2-amino-2-deoxy-α- and β-d-glucose were also transformed into the corresponding isocyanates and converted in situ into ureas by coupling with aromatic and aliphatic amines.     

Determination of pirimicarb and endosulfan in commercial pesticide formulations by Fourier transform infrared spectrometry

A routine method based on Fourier transform infrared spectrometry was developed for the simultaneous determination of pirimicarb and endosulfan in commercially available pesticide formulations. The method is based on peak area absorbance measurements between 1362 and 1352 cm(-1), corrected with a baseline fixed at 1338 cm(-1), for pirimicarb and peak area absorbance measurements between 919 and 909 cm(-1) with a baseline fixed at 931 cm(-1) for endosulfan; chloroform solutions for analysis were obtained by direct dilution of emulsifiable concentrates or by solvent extraction from solid samples. Various extraction conditions and appropriate band selection were investigated, and interference studies were performed. Under the experimental conditions selected, limits of detection of 13 microg/g for pirimicarb and 150 microg/g for endosulfan were obtained that correspond to 0.13 and 1.6% (w/w), respectively, in commercial samples. Results from analyses of commercial samples by the developed method compared well with those obtained by a liquid chromatography reference method.