Binding of β-lactam antibiotics to a bioinspired dizinc complex reminiscent of the active site of metallo-β-lactamases

Metallo-β-lactamases (mβls) cause bacterial resistance toward a broad spectrum of β-lactam antibiotics by catalyzing the hydrolytic cleavage of the four-membered β-lactam ring, thus inactivating the drug. Minutiae of the mechanism of these enzymes are still not well understood, and reports about binding studies of the substrates to the enzymes as well as to synthetic model systems are rare. Here we report a new pyrazolate-based bioinspired dizinc complex (1) reminiscent of the active site of binuclear mβls. Since 1 does not mediate hydrolytic degradation of β-lactams, the binding of a series of common β-lactam antibiotics (benzylpenicillin, cephalotin, 6-aminopenicillanic acid, ampicillin) as well as the inhibitor sulbactam and the simplest β-lactam, 2-azetidinone, to the dizinc core of 1 could now be studied in detail by NMR and IR spectroscopy as well as mass spectrometry. X-ray crystallographic information was obtained for 1 and its complexes with 2-azetidinone (2) and sulbactam (3); the latter represents the first structurally characterized dizinc complex with a bound β-lactam drug. While 2-azetidinone was found deprotonated and bridging in the clamp of the two zinc ions in 2, in 3 and all other cases the substrates preferentially bind via their carboxylate group within the bimetallic pocket. The relevance of this binding mode for mβls and consequences for the design of functional model systems are discussed.     

Reversible Solvatomagnetic Effect in Novel Tetranuclear Cubane-Type Ni(4) Complexes and Magnetostructural Correlations for the [Ni(4)(μ(3)-O)(4)] Core

A new family of tetranuclear nickel cube complexes [Ni(4)L(4)(solv)(4)] (1, solv = MeOH; 2, solv = H(2)O; H(2)L = pyrazole-based tridentate {ONO} ligand) has been studied in detail, in particular by X-ray diffraction and superconducting quantum interference device (SQUID) magnetometry. Different solvates 1·H(2)O, 2·4C(3)H(6)O, 2·CH(2)Cl(2), and 2·H(2)O were obtained in crystalline form. Only small structural variations were found for the Ni-O-Ni angles of the [Ni(4)O(4)] cores of those compounds, but these slight variations have dramatic consequences for the magnetic properties. [Ni(4)L(4)(MeOH)(4)]·H(2)O (1·H(2)O) and [Ni(4)L(4)(H(2)O)(4)]·H(2)O (2·H(2)O) can be reversibly interconverted in the solid state by exposure to the respective solvent, MeOH or H(2)O, and this goes along with a switching of the spin ground state from magnetic (S(T) = 4) to diamagnetic (S(T) = 0). Likewise the (irreversible) loss of lattice solvent in [Ni(4)L(4)(H(2)O)(4)]·4C(3)H(6)O (2·4C(3)H(6)O) to give 2·2C(3)H(6)O changes the ground state from S(T) = 4 to S(T) = 0. In view of these dramatic solvatomagnetic effects for the present [Ni(4)L(4)(solv)(4)] complexes, which occur upon extrusion of lattice solvent or facile exchange of coordinated solvent molecules while keeping the robust [Ni(4)O(4)] core intact, a note of care is issued: whenever magnetic data are obtained for powdered material or for crystals that easily loose lattice solvent molecules, the magnetic properties may not necessarily reflect the situation observed in the corresponding single crystal diffraction study. Finally, a thorough analysis of the present series of complexes as well as other {Ni(4)(μ(3)-OR)(4)} cubes reported in the literature confirms that a correlation between the (Ni-O-Ni)(av) bond angle and J in [Ni(4)O(4)] cubane complexes does indeed exist.     

Organocatalytic Asymmetric Formation of Steroids

A novel and simple one‐step approach for the construction of optically active steroids in a highly stereoselective manner by using organocatalysis is presented. The reaction of (di)enals with cyclic dienophiles in the presence of a TMS‐protected prolinol catalyst leads to the construction of important 14 β‐steroids. This new reaction allows an easy access to optically active steroids with a variety of substituents in the A ring in high yields and up to greater than 99 % ee. The reaction has been extended to include the construction of B‐ and D ‐homosteroids as well as steroids containing heteroatoms in the B ring. The angular substituent at C13 can be varied and alkyl, ester, and sulfone functionalities are introduced with excellent stereoselectivities. Simple synthetic procedures provide access to a range of naturally occurring steroids such as estrone and related analogues.     

Complex Macrophase‐Separated Nanostructure Induced by Microphase Separation in Binary Blends of Lamellar Diblock Copolymer Thin Films

The nanostructures of thin films spin‐coated from binary blends of compositionally symmetric polystyrene‐b‐polybutadiene (PS‐b‐PB) diblock copolymer having different molar masses are investigated by means of atomic force microscopy (AFM) and grazing‐incidence small‐angle X‐ray scattering (GISAXS) after spin‐coating and after subsequent solvent vapor annealing (SVA). In thin films of the pure diblock copolymers having high or low molar mass, the lamellae are perpendicular or parallel to the substrate, respectively. The as‐prepared binary blend thin films feature mainly perpendicular lamellae in a one‐phase state, indicating that the higher molar mass diblock copolymer dominates the lamellar orientation. The lamellar thickness decreases linearly with increasing volume fraction of the low molar mass diblock copolymer. After SVA, well‐defined macrophase‐separated nanostructures appear, which feature parallel lamellae near the film surface and perpendicular ones in the bulk.

     

Substitution pattern elucidation of hydroxypropyl Pinus pinaster (Ait.) bark polyflavonoid derivatives by ESI(−)‐MS/MS

The structure of condensed tannins (CTs) from Pinus pinaster bark extract and their hydroxypropylated derivatives with four degrees of substitution (DS 1, 2, 3 and 4) has been characterized for the first time using negative‐ion mode electrospray ionization tandem mass spectrometry (ESI(?)‐MS/MS). The results showed that P. pinaster bark CTs possess structural homogeneity in terms of monomeric units (C₁₅, catechin). The oligomer sizes were detected to be dimers to heptamers. The derivatives showed typical phenyl‐propyl ether mass fragmentation by substituent elimination (58 amu) and inherent C₁₅ flavonoid fissions. The relative abundance of the product ions revealed a preferential triple, tetra‐/penta‐ and octa‐ hydroxypropylation substitution pattern in the monomer, dimer and trimer derivatives, respectively. A defined order of –OH reactivity towards propylene oxide was established by means of multistage experiments (A‐ring ≥ B‐ring > C‐ring). A high structural heterogeneity of the modified oligomers was detected. Copyright © 2014 John Wiley & Sons, Ltd.     

Ethanol/water solutions as certified reference materials for breath alcohol analyzer calibration

The Federal Institute for Materials Research and Testing (BAM), Germany, has issued a series of large volume ethanol in water certified reference materials (CRMs), primarily developed for the calibration of evidential breath alcohol analyzers in Germany. The certified parameter is the ethanol mass concentration at 20 °C. When used in a wet bath simulator, the solutions deliver gas samples that meet the requirements set by the Organization of Legal Metrology for calibration of breathalyzers. The materials were prepared gravimetrically by spiking of ethanol into water in single 5 L units. A complete uncertainty budget for the preparation process has been established. The purity of the commercial ethanol stock solution was identified to be the main source of uncertainty. For stability and homogeneity measurements and for the verification of the gravimetric mass concentration of the CRMs, a robust high-precision gas chromatography, with flame-ionization detection method for ethanol determination in aqueous samples was developed and validated. The good performance of this method has been demonstrated in several international comparisons organized by the Consultative Committee for Amount of Substance—Metrology in Chemistry at the International Bureau of Weights and Measures.     

The Simplest Amino‐borane H2B=NH2 Trapped on a Rhodium Dimer: Pre‐Catalysts for Amine–Borane Dehydropolymerization

The μ‐amino–borane complexes [Rh₂(L^R)₂(μ‐H)(μ‐H₂B=NHR′)][BAr^F₄] (L^R=R₂P(CH₂)₃PR₂; R=Ph, ⁱPr; R′=H, Me) form by addition of H₃B?NMeR′H₂ to [Rh(L^R)(η⁶‐C₆H₅F)][BAr^F₄]. DFT calculations demonstrate that the amino–borane interacts with the Rh centers through strong Rh‐H and Rh‐B interactions. Mechanistic investigations show that these dimers can form by a boronium‐mediated route, and are pre‐catalysts for amine‐borane dehydropolymerization, suggesting a possible role for bimetallic motifs in catalysis.     

Synthesis of a Ferrolite: A Zeolitic All‐Iron Framework

Crystals of the first sodalite‐type zeolite containing an all‐iron framework, a ferrolite, Ba₈(Fe₁₂O₂₄)Na_y(OH)₆?x H₂O, were synthesized using the hydroflux method in nearly quantitative yield. Ba₈(Fe₁₂O₂₄)Na_y(OH)₆?x H₂O crystallizes in the cubic space group with a=10.0476(1) Å. Slightly distorted FeO₄ tetrahedra are linked to form Fe₄O₄ and Fe₆O₆ rings, which in turn yield channels and internal cavities that are characteristic of the sodalite structure. Barium, sodium, and hydroxide ions and water molecules are found in the channels and provide charge balance. Magnetic measurements indicate that the ferrolite exhibits magnetic order up to at least 700 K, with the field‐cooled and zero‐field‐cooled curves diverging. Analysis of the ⁵⁷Fe Mössbauer spectra revealed two spectral components that have equal spectral areas, indicating the presence of two subsets of iron centers in the structure. Dehydrated versions of the ferrolite were also prepared by heating the sample.     

Improvement of the Water Resistance of a Narrow‐Band Red‐Emitting SrLiAl3N4:Eu2+ Phosphor Synthesized under High Isostatic Pressure through Coating with an Organosilica Layer

A SrLiAl₃N₄:Eu²⁺ (SLA) red phosphor prepared through a high‐pressure solid‐state reaction was coated with an organosilica layer with a thickness of 400–600 nm to improve its water resistance. The observed 4f⁶5d→4f⁷ transition bands are thought to result from the existence of Eu²⁺ at two different Sr²⁺ sites. Luminescence spectra at 10 K revealed two zero‐phonon lines at 15377 (for Eu(Sr1)) and 15780 cm^?1 (for Eu(Sr2)). The phosphor exhibited stable red emission under high pressure up to 312 kbar. The configurational coordinate diagram gave a theoretical explanation for the Eu^2+/3+ result. The coated samples showed excellent moisture resistance while retaining an external quantum efficiency (EQE) of 70 % of their initial EQE after aging for 5 days under harsh conditions. White‐light‐emitting diodes of the SLA red phosphor and a commercial Y₃Al₅O₁₂:Ce³⁺ yellow phosphor on a blue InGaN chip showed high color rendition (CRI=89, R9=69) and a low correlated color temperature of 2406 K.     

<!?tlsb=‐0.06pt>Zigzag polymer chains in catena‐poly[[[triaqua(isobutyrato‐κO)magnesium(II)]‐μ‐isobutyrato‐κ2O:O′] monohydrate]

The structure of the title compound, {[Mg(C₄H₇O₂)₂(H₂O)₃]·H₂O}_n, features one‐dimensional ...(μ₂‐ib)Mg(μ₂‐ib)Mg... zigzag chains (ib is isobutyrate) parallel to the c axis. The octahedral Mg environment is completed by three fac‐oriented terminal water ligands, as well as one further monodentate end‐on coordinated ib ligand. In the crystal structure, the hydrophobic ib groups are all oriented within one half of the coordination perimeter of each chain, whereas the water ligands, together with hydrogen‐bonded noncoordinated solvent water molecules, define the other half. Along the a axis, neighbouring strands are oriented so that both the hydrophilic and hydrophobic sides are adjacent to each other. This results in an extensive hydrogen‐bonding network within the hydrophilic areas, also involving an additional solvent water molecule per formula unit. There are van der Waals contacts between the aliphatic isopropyl groups of the hydrophobic areas.