Microscopic modeling of intersubband resonances in InAs/AlSb quantum wells

Linear absorption spectra from intersubband resonance in InAs/AlSb quantum wells are analyzed theoretically using the intersubband semiconductor Bloch equation approach. Our model goes beyond the Hartree–Fock approximation and treats particle–particle correlations under the second Born approximation. Electron–electron and longitudinal optical phonon scatterings from such a treatment describe intrinsic line broadening to the intersubband resonance. Electron subbands are determined self-consistently with a spurious-state-free 8-band k·p Hamiltonian under the envelope function approximation. To compare with experimental measurements, we also included line broadening due to electron-interface roughness scattering. Excellent agreement was achieved for temperature-dependent absorption spectra in the mid-infrared frequency range, after taking into careful account the interplay of material parameters, nonparabolicity in bandstructure, and many-body effects.     

滇桂艾纳香水溶性多糖BRP-B的分离纯化及止血活性

用蒸馏水溶解滇桂艾纳香浸膏,从中提取多糖,通过膜分离、三氯乙酸法脱蛋白、二乙氨基乙基(DEAE)脱色、SephadexG10、SephadexG50凝胶柱色谱纯化,获得滇桂艾纳香水溶性多糖(BRP-B)。 由凝胶渗透色谱（HPGPC）确定BRP-B为相对分子质量分布均一的多糖,其数均分子量和质均分子量分别为2654和2716 Da。 以血浆复钙时间（PRT）为指标,研究BRP-B的凝血活性,结果显示BRP-B质量浓度为6.25×10-2 g/L时,凝血时间为248.52 s,凝血时间抑制率达22.42%。 小白鼠离体子宫实验结果显示,BRP-B质量浓度为1.67×10-2、1.97×10-2及2.85×10-2 g/L时能明显增加子宫平滑肌的收缩频率。     

Mo:Y multilayer mirror technology utilized to image the near-field output of a Ni-like Sn laser at 11.9 nm

Although bright x-ray sources exist at shorter wavelengths, the development of sophisticated diagnostics with x-ray laser sources has been restricted to wavelengths longer than 12.5 nm because of the limitations of the widely used Mo:Si multilayer mirrors. With the novel Mo:Y multilayer mirrors that we present, many x-ray laser applications can be extended to the 7-12-nm range. We demonstrate this new capability by imaging the near-field output of the Ni-like Sn laser at 11.9 nm.     

Application of terahertz quantum-cascade lasers to semiconductor cyclotron resonance

Quantum-cascade lasers operating at 4.7, 3.5, and 2.3 THz have been used to achieve cyclotron resonance in InAs and InSb quantum wells from liquid-helium temperatures to room temperature. This represents one of the first spectroscopic applications of terahertz quantum-cascade lasers. Results show that these compact lasers are convenient and reliable sources with adequate power and stability for this type of far-infrared magneto-optical study of solids. Their compactness promises interesting future applications in solid-state spectroscopy.     

Levels of tritium concentration in the environmental samples around JAERI TOKAI

By the operation of research reactors, tritium-handling facilities, nuclear power plants, and a reprocessing facility around JAERI TOKAI, tritium is released into the environment in compliance with the regulatory standards.To investigate the levels of tritium concentration in environmental samples around JAERI, rain, air (vapor and hydrogen gas), and tissue-free water of pine needles were measured and analyzed from 1984 to 1993. Sampling locations were determined by taking into consideration wind direction, distance from nuclear facilities, and population distribution. The NAKA site (about 6 km west-northwest from the TOKAI site) was also selected as a reference point.Rain and tissue-free water of pine needles were sampled monthly. For air samples, sampling was carried out for two weeks by using the continuous tritium sampler. After the pretreatment of samples, tritium concentrations were measured by a low background liquid scintillation counter (detection limit is 0.8 Bq/l).Annual mean tritium concentrations in rain observed at six points for 10 years was 0.8 to 8.9 Bq/l, which decreased with distance from the nuclear facilities. Tritium concentrations in rain obtained at Chiba City were around 0.8 Bq/l (1987–1988) and those at the NAKA site were 0.8 to 3.8 Bq/l.Annual mean HTO concentrations in air at three points for 10 years were 9.2×10^–2 to 1.1 Bq/m³, although HT concentrations in air, ranging from 1.7×10^–2 to 5.8×10^–2 Bq/m³, were not influenced by the operation of the nuclear facilities.Annual mean tritium concentrations in tissue-free water of pine needles at four points for 10 years were 1.4 to 31 Bq/l. Those at the NAKA site ranging from 1.4 to 6.2 Bq/l were in good agreement with the reported value by Takashima of 0.78 to 3.0 Bq/l at twenty-one locations in Japan.Monthly mean HTO concentrations in air for 10 years showed a good correlation with absolute humidity, while other samples showed no seasonal variation.Higher level tritium concentrations in rain, in air (vapor), and in tissue-free water of pine needles at the TOKAI site were caused by the tritium released from the nuclear facilities.The committed effective dose equivalent to the member of general public, estimated using the maximum tritium concentration in air (1.1 Bq/m³), was 0.23 Sv, which was about 1/4000 of dose limit for general public.     

Use of functional microgels with vinyl groups to accelerate photopolymerization reaction

Three types of functional microgels with vinyl groups on their surface were prepared. For the first type, the counter anion from clorin was exchanged with β-methacryloylethyl sulfonic acid, styrene sulfonic acid or allyl sulfonic acid in a microgel with ammonium anions. For the second and third types, a quaternization with N,N-dimethylaminoethyl methacrylate of 3-chloro-2-hydroxypropyl methacrylate in the presence of microgel particles was prepared by emulsion copolymerization of styrene, chloromethylstyrene or N,N-dimethylamino-methylbenzene, and divinylbenzene. The resulting samples show good dispersibility in organic solvents without an emulsifier. A functional microgel-based photopolymer combined with an acrylate monomer and ultraviolet (UV) or visible (VIS) light-absorbing photoinitiators provides oleophilic images when exposed to UV or VIS light and developed in tap water. This photopolymer has a higher sensitivity than those of photopolymers based on microgels with an analogous composition but without vinyl groups. Photopolymers pepared by using functional microgels with a methacryloyl group exhibited a higher rate of polymerization (R_p) than that of photopolymers based on microgels without a vinyl group. The R_p of photopolymers prepared by using a functional microgel with either an allyl group or vinylphenyl group was nearly equal to that of photopolymers based on microgels with ammonium ions. Their high sensitivities are attributed to the rapid photopolymerization in the methacryloyl group. To determine how the photoreaction mechanism enhances sensitivity, the photoreaction products were investigated using a model photopolymerization system. It was found that the gelation reactions enhancing sensitivity are predominantly the polymerization and crosslinking ones when a microgel with the methacryloyl group is used, and the graft copolymerization with acrylate monomers when a microgel with either the allyl group or vinylphenyl group is used.