Process-Structure-Formulation Interactions for Enhanced Sodium Ion Battery Development: A Review

Before the viability of a cell formulation can be assessed for implementation in commercial sodium ion batteries, processes applied in cell production should be validated and optimized. This review summarizes the steps performed in constructing sodium ion (Na-ion) cells at research scale, highlighting parameters and techniques that are likely to impact measured cycling performance. Consistent process-structure-performance links have been established for typical lithium-ion (Li-ion) cells, which can guide hypotheses to test in Na-ion cells. Liquid electrolyte viscosity, sequence of mixing electrode slurries, rate of drying electrodes and cycling characteristics of formation were found critical to the reported capacity of laboratory cells. Based on the observed importance of processing to battery performance outcomes, the current focus on novel materials in Na-ion research should be balanced with deeper investigation into mechanistic changes of cell components during and after production, to better inform future designs of these promising batteries.     

Charge Transfer Induces Formation of Stimuli‐Responsive,Chiral, Cohesive Vesicles‐on‐a‐String that Eventually Turn into a Hydrogel

A charge transfer (CT) mediated two‐component, multistimuli responsive supergelation involving a L ‐histidine‐appended pyrenyl derivative (PyHisOMe) as a donor and an asymmetric bolaamphiphilic naphthalene‐diimide (Asym‐NDI) derivative as an acceptor in a 2:1 mixture of H₂O/MeOH was investigated. Asym‐NDI alone self‐assembled into pH‐responsive vesicular nanostructures in water. Excellent selectivity in CT gel formation was achieved in terms of choosing amino acid appended pyrenyl donor scaffolds. Circular dichroism and morphological studies suggested formation of chiral, interconnected vesicular assemblies resembling “pearls‐on‐a‐string” from these CT mixed stacks. XRD studies revealed the formation of monolayer lipid membranes from these CT mixed stacks that eventually led to the formation of individual vesicles. Strong cohesive forces among the interconnected vesicles originate from the protrusion of the oxyethylene chains from the surfaces of the chiral vesicles.     

Propagation of SH‐wave in an initially stressed orthotropic medium sandwiched by a homogeneous and an inhomogeneous semi‐infinite media

The paper presents a study of propagation of shear wave (SH‐wave) in an orthotropic elastic medium under initial stress sandwiched by a homogeneous semi‐infinite medium and an inhomogeneous half‐space. The technique of separation of variables has been adopted to get the analytical solutions for the dispersion relation in a closed form. The propagation of SH‐waves is influenced by inhomogeneity parameters and initial stress parameter. Velocities of SH‐waves are calculated numerically for different cases. As a special case when the intermediate layer and half‐space are homogeneous, computed frequency equation coincides with general equation of Love wave. To study the effect of inhomogeneity parameters and initial stress parameter, we have plotted the velocity of SH‐wave in several figures and observed that the velocity of wave decreases with the increases of non‐dimensional wave number. It can be found that the phase velocity decreases with the increase of inhomogeneity parameters. We observed that the velocity of SH‐wave decreases with the increases of initial stress parameter in both homogeneous and inhomogeneous media. GUI has been developed by using MATLAB to generalize the effect of the parameters discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and biological evaluation of <Superscript>99m</Superscript>Tc-DHPM complex: a potential new radiopharmaceutical for lung imaging studies

In the recent years interests on dihydropyrimidinone and their analogues have increased potentially due to their wide range of pharmacological/biological activities. Synthesis, radiolabeling with technetium-99 m (^99mTc) and biological evaluation of 5-etoxycarbonyl-4-phenyl-6-methyl-3,4-dihydro-(1H)-pyrimidine-2-one (DHPM) were studied in this present work. After synthesis complexation of DHPM with ^99mTc was carried out using stannous chloride as the reducing agent. The complex (^99mTc-DHPM) was characterized by thin layer chromatography, radio-HPLC technique and determination of partition co-efficient. Radiochemical stability and particle size distribution of the complex were also measured. Biodistribution/scintigraphy studies were performed in rats and rabbits to evaluate the pharmacological characteristics of this complex. The radiochemical purity of the complex was over 95% as studied by thin layer chromatography and radio-HPLC. It was stable over 24 h at room temperature. Its partition coefficient indicated that it was a lipophilic complex. According to the European Pharmacopeia, >80% of ^99mTc labeled radiopharmaceutical (^99mTc-MAA) in the size range 10–50 μm, must be accumulated in the lungs 15 min after intravenous administration. In this study >85% of the ^99mTc-DHPM complex in the average size of 40 μm. Biodistribution studies of ^99mTc-DHPM in rat revealed that the complex accumulated in the lung with high uptake and good retention after intravenous administration. Scintigraphic studies in rabbit also revealed that most of the administered radiolabeled complex was accumulated in the lungs and after 1 h slowly excreted through the renal system. The lung uptake (ID%/g) was 10.12, 9.67, 8.60 and 5.01 and the lung/liver ratio was 7.49, 2.88, 2.62 and 1.87 at 2, 15, 30 and 60 min post-injection, respectively. These results suggested that ^99mTc-DHPM could be suitable as a potential lung perfusion imaging agent. Further studies with ^99mTc-DHPM and its derivatives are warranted to develop new ^99mTc-labeled imaging agents for clinical applications.     

Electrophoretic mapping of highly homologous keratins: A novel marker peptide approach

Identification of the intermediate filament proteins (IFPs) in the wool proteome has formerly been hampered by limited sequence information, the high degree of IFP homology and their close proximity on 2‐DE maps. This has been partially rectified by the recent acquisition of four new Type I and two Type II wool IFP sequences. Among closely migrating proteins, such as IFP clusters in a 2‐DE map, proteins with higher sequence coverage will be assigned higher scores, but the identification of unique peptides in such tight clusters may distinguish these closely migrating proteins. Two approaches were adopted for the study of wool IFPs. In the first, searches were conducted for peptides known to be unique to each member of the family in each spot. In the second, MALDI imaging was employed to examine peptides bound to a PVDF membrane from a poorly resolved part of the Type I IFP region of the 2‐DE map. As a result, a distinct picture has emerged of the distribution of the six Type I and four Type II IFPs across the 2‐DE wool protein map.     

Palladium-mediated reductive Mizoroki-Heck cyclization strategy for the regioselective formation of dibenzoazocinone framework

The synthesis of dibenzoazocine framework through palladium-mediated reductive Mizoroki-Heck cyclization has been described. The procedure is simple, straightforward, and regioselective.     

Enantioselective Formal C(sp2)−H Vinylation

An enantioselective formal C(sp²)?H vinylation of prochiral 2,2‐disubstituted cyclopentene‐1,3‐dione is presented. This vinylative desymmetrization is realized by using a two‐step procedure that consists of a catalytic enantioselective vinylogous Michael addition of deconjugated butenolides to cyclopentene‐1,3‐dione and a base‐mediated decarboxylation. The overall process utilizes deconjugated butenolides as the source of the highly substituted vinyl unit. Five‐membered carbocycles containing a remote all‐carbon quaternary stereogenic center are obtained in good yields and with good to high enantioselectivities.     

Reactions that generate aromatic molecules: is aromatic stabilization less or more advanced than bond changes at the transition state? Kinetic and thermodynamic acidities of rhenium carbene complexes

A kinetic study of the reversible deprotonation of the rhenium carbene complexes 1H(+)(O), 1H(+)(S) and 2H(+)(O) by carboxylate ions, primary aliphatic and secondary alicyclic amines, water and OH(-) in 50% MeCN-50% water (v/v) at 25 degrees C is reported. These carbene complexes are of special interest because in their deprotonated form they represent derivatives of the aromatic heterocycles furan, thiophene and benzofuran. Intrinsic rate constants (k(o) for Delta G degrees = 0) determined from appropriate Br?nsted plots for these rhenium carbene complexes and for the corresponding selenophene (1H(+)(Se)) and benzothiophene (2H(+)(S)) derivatives investigated earlier follow the orders furan < selenophene < thiophene and benzofuran less, similar benzothiophene. These orders indicate that an increase in aromaticity leads to an increase in the intrinsic rate constant or a decrease in the intrinsic barrier. This is an unexpected result; it implies that, in contrast to common resonance effects, the development of aromaticity at the transition state is ahead of proton transfer, i.e., the percentage development of the aromatic stabilization energy at the transition state is higher than the percentage of proton transfer.