Enaminones in heterocyclic synthesis: Synthesis and chemical reactivity of 3‐anilino‐1‐substituted‐2‐propene‐1‐ one

The 3‐anilinoenones 3a,b were prepared from the corresponding 3‐dimemyl‐aminopropenones. The reactivity of 3a,b towards a variety of carbon and nitrogen nucleophiles as well as naphthoquinones is reported.     

A Microwave Assisted Diazo Coupling Reaction: The Synthesis of Alkylazines and Thienopyridazines

Heating diazoaminobenzene with active methylene compounds 1–3 in microwave oven in acetic acid, in the presence of hydrochloric acid, afforded the corresponding arylhydrazones 5–7. These reaction products were condensed with ethyl cyanoacetate in a domestic microwave oven after 1–2 minutes heating to yield the pyridazinones 8–12. Compounds 8c and 12 reacted with sulfur in basic DMF solution, in microwave oven using MORE technology to yield the thienopyridazinone 14 and 16 respectively. While 17 was produced when 8b was treated like wise with sulfur and DMF in the presence of piperidine. Compounds 16 coupled with aromatic diazonium salts to yield arylazo derivatives 21a–c.     

Cetyltrimethylammonium bromide-coated magnetite nanoparticles as highly efficient adsorbent for rapid removal of reactive dyes from the textile companies’ wastewaters

The utilization of modified magnetite nanoparticles (Fe₃O₄ NPs) with a cationic surfactant (cetyltrimethylammonium bromide (CTAB)) as an efficient adsorbent was successfully carried out to remove reactive black 5 (RBBA), reactive red 198 (RRR) and reactive blue 21 (RTB) dyes from aqueous solutions. First, a reactor was designed to be simple, repeatable and efficient in its synthesis of Fe₃O₄ NPs via co-precipitation method. Then, an orthogonal array design (OAD), four factor-four level (4⁴) matrix was applied to assign affecting factors on removing of the dyes from aqueous solutions. The obtained results from ANOVA showed that the amount of CTAB and NaCl% significantly affect the adsorption of RBBA, RRR and RTB dyes. The sorption kinetics of the dyes were best described by a second-order kinetic model, suggesting chemisorptions mechanism. Also, dye adsorption equilibrium state data were fitted well to the Langmuir isotherm rather than Freundlich isotherm. Also, the maximum monolayer capacity, q_max, obtained from the Langmuir was 312.5, 163.9 and 556.2 mg g^-1 for RBBA, RRR and RTB, respectively. The obtained results in the present study indicated that the CTAB-coated Fe₃O₄ NPs can be an efficient adsorbent material for removal of reactive dyes form aqueous solutions.     

Photochromism of dihydroindolizines. Part XVI: first attempts toward molecular wires comprising photochromic dihydro 5-azaindolizines and π-extended ethynyl and butadiynyl oxadiazole derivatives

Eight new photochromic dihydro 5-azaindolizines (DHAIs) linked with 2,5-diaryl-1,3,4-oxadiazole (OXD) derivatives containing terminal ethynes and butadiyne substituents on the fluorene part of the DHAI skeleton are synthesized via palladium-mediated coupling reaction pathways. Irradiation of the DHAI-OXD derivatives with polychromatic light affords red- and green-colored betaines.     

Extraction of biogenic amines using sorbent materials containing immobilized crown ethers

Three sorbent materials (A18C6-MS, DA18C6-MS and AB18C6-MS) based on the crown ether ligands, 1-aza-18-crown-6, 1,4,10,13-tetraoxa-7,16-diazacyclo octadecane and 4′-aminobenzo-18-crown-6, respectively, were prepared by the chemical immobilization of the ligand onto mesoporous silica support. The sorbents were characterized by FT-IR, scanning electron microscopy-energy dispersive X-ray microanalysis, elemental analysis and nitrogen adsorption-desorption test. The applicability of the sorbents for the extraction of biogenic amines by the batch sorption method was extensively studied and evaluated as a function of pH, biogenic amines concentration, contact time and reusability. Under the optimized conditions, all the sorbents exhibited highest selectivity toward spermidine (SPD) compared to other biogenic amines (tryptamine, putrescine, histamine and tyramine). Among the sorbents, AB18C6-MS offer the highest capacity and best selectivity towards SPD in the presence of other biogenic amines. The AB18C6-MS sorbent can be repeatedly used three times as there was no significant degradation in the extraction of the biogenic amines (%E > 85). The optimized procedure was successfully applied for the separation of SPD in food samples prior to the reversed-phase high performance liquid chromatography separation.     

Biochemical Properties of α-Amylase from Peel of <Emphasis Type="Italic">Citrus sinensis</Emphasis> cv. Abosora

α-Amylase activity was screened in the peel, as waste fruit, of 13 species and cultivars of Egyptian citrus. The species Citrus sinensis cv. Abosora had the highest activity. α-Amylase AI from Abosora peel was purified to homogeneity using anion and cation-exchange, and gel filtration chromatographies. Molecular weight of α-amylase AI was found to be 42 kDa. The hydrolysis properties of α-amylase AI toward different substrates indicated that corn starch is the best substrate. The α-amylase had the highest activity toward glycogen compared with amylopectin and dextrin. Potato starch had low affinity toward α-amylase AI but it did not hydrolyze β-cyclodextrin and dextran. Apparent Km for α-amylase AI was 5 mg (0.5%) starch/ml. α-Amylase AI showed optimum activity at pH 5.6 and 40 °C. The enzyme was thermally stable up to 40 °C and inactivated at 70 °C. The effect of mono and divalent metal ions were tested for the α-amylase AI. Ba²⁺ was found to have activating effect, where as Li⁺ had negligible effect on activity. The other metals caused inhibition effect. Activity of the α-amylase AI was increased one and half in the presence of 4 mM Ca²⁺ and was found to be partially inactivated at 10 mM Ca²⁺. The reduction of starch viscosity indicated that the enzyme is endoamylase. The results suggested that, in addition to citrus peel is a rich source of pectins and flavanoids, α-amylase AI from orange peel could be involved in the development and ripening of citrus fruit and may be used for juice processing.     

Oxidation of phenol and chlorophenols on platinized titanium anodes in an acidic medium

A comparative study of oxidation of phenol, 3-chlorophenol, 4-chlorophenol, and 2,4-dichlorophenol on Pt/Ti and Ce,Pt/Ti electrocatalysts is performed via cyclic voltammetry. It is shown that the surface morphology and roughness of the anode do not change after modification with cerium. The formal kinetic orders of electrooxidation of all compounds are found to be less than one. It is shown that the β temperature coefficients of the rate of oxidation of chlorophenols grow by 10 to 50% when the Ce,Pt/Ti anode is used at a substrate concentration of 1 mM. A tenfold increase in concentration reduces the effect of cerium additive, except for 3-chlorophenol: the latter exhibits a 250% increase in the β value, compared to the Pt/Ti anode.     

Structural characterization of new Cd(2+) fluorescent sensor based on lumazine ligand: AM1 and ab initio studies

6-Thienyllumazine (TLM) is synthesized as a new fluorescent sensor that is capable of indicating selectively the presence of Cd(2+) ion via a fluorescence signal. Experiment has been performed in the presence of Ni(2+), Co(2+), Cu(2+), Ag(+), Mn(2+), Hg(2+), Zn(2+), Pb(2+), and Mg(2+) metal ions in aqueous solutions. The product was characterized by elemental analysis, mass, and NMR spectra. The spectral characteristics (maxima, quantum yields, Stokes shift, and lifetimes) of TLM in organic and aqueous solvents have been studied with the help of absorption and fluorescence spectroscopy, as well as, using time dependent spectrofluorimetry (single photon counting technique). The fluorescence dependence of TLM on the pH has also been investigated. The experimental results indicate that TLM exists in two ionic forms: neutral (acid) and anion (base). Electronic structure calculations of TLM were carried out using Semiempirical Austin Model 1 (AM1) and ab initio Hartree-Fock (HF) with 6-31G* basis set and using Gaussian 03 program. Absorption energies for TLM have been calculated using ZINDO method. The theoretical results confirm the presence of the thiophene and pteridine rings in two conformations: twisted at angle of about 35 degrees in the excited state and coplanar in the ground state.     

Regioselective synthesis of some novel pyrazoles,isoxazoles, pyrazolo[3,4‐d]pyridazines and isoxazolo[3,4‐d]pyridazines pendant to benzimidazole

2‐Acetyl‐1‐methyl‐1H‐benzimidazole reacts with dimethylformamide‐dimethyl‐acetal (DMF‐DMA) to afford the corresponding E‐1‐(1‐methyl‐1H‐benzimidazol‐2‐yl)‐3‐N,N‐dimethylaminoprop‐2‐enone. The latter compound reacts regioselectively with some nitrilimines and nitrile oxides to afford the corresponding pyrazole and isoxazole derivatives, respectively. These reaction products react with hydrazine hydrate to give the novel pyrazolo[3,4‐d]pyridazine and isoxazolo[3,4‐d]pyridazine derivatives, respectively.