Cetyltrimethylammonium bromide-coated magnetite nanoparticles as highly efficient adsorbent for rapid removal of reactive dyes from the textile companies’ wastewaters

The utilization of modified magnetite nanoparticles (Fe₃O₄ NPs) with a cationic surfactant (cetyltrimethylammonium bromide (CTAB)) as an efficient adsorbent was successfully carried out to remove reactive black 5 (RBBA), reactive red 198 (RRR) and reactive blue 21 (RTB) dyes from aqueous solutions. First, a reactor was designed to be simple, repeatable and efficient in its synthesis of Fe₃O₄ NPs via co-precipitation method. Then, an orthogonal array design (OAD), four factor-four level (4⁴) matrix was applied to assign affecting factors on removing of the dyes from aqueous solutions. The obtained results from ANOVA showed that the amount of CTAB and NaCl% significantly affect the adsorption of RBBA, RRR and RTB dyes. The sorption kinetics of the dyes were best described by a second-order kinetic model, suggesting chemisorptions mechanism. Also, dye adsorption equilibrium state data were fitted well to the Langmuir isotherm rather than Freundlich isotherm. Also, the maximum monolayer capacity, q_max, obtained from the Langmuir was 312.5, 163.9 and 556.2 mg g^-1 for RBBA, RRR and RTB, respectively. The obtained results in the present study indicated that the CTAB-coated Fe₃O₄ NPs can be an efficient adsorbent material for removal of reactive dyes form aqueous solutions.     

A novel synthesis of 2-arylhydrazono-6-amino-4-arylbenzene-1,3-dicarbonitriles and their conversion into phthalazines

Compounds 1a-d react with benzylidenemalononitrile 2 to yield dihydroaminopyridazines 3a-d and, in contrast, compounds 1e,f react with 2 under the same conditions to yield aminobenzenedicarbonitriles 8e,f compound 8e underwent intramolecular cyclization to phthalazine 9e. Compound 10e reacted with 2a to yield 11e.     

Taguchi OA16 orthogonal array design for the optimization of cloud point extraction for selenium determination in environmental and biological samples by tungsten-modified tube electrothermal atomic absorption spectrometry

Orthogonal array design (OAD) was applied for the first time to optimize cloud point extraction (CPE) conditions for Se(IV) determination by electrothermal atomic absorption spectrometry (ETAAS) in environmental and biological samples. Selenium was reacted with o-phenylenediamine to form piazselenol in an acidic medium (pH 2). Using Triton X-114, as surfactant, piazselenol was quantitatively extracted into small volume (about 30 μL) of the surfactant-rich phase after centrifugation. Five relevant factors, i.e. surfactant concentration, pH, ionic strength, equilibrium time and temperature were selected and the effects of each factor were studied at four levels on the extraction efficiency of Se(IV) and optimized. The statistical analysis revealed that the most important factors contributing to the extraction efficiency are ionic strength, pH and percent of surfactant. Based on the results obtained from the analysis of variance (ANOVA), the optimum conditions for extraction were established as: pH 6; vial temperature = 50 °C; extraction time = 7 min and 0.3% (w/v) of Triton X-114. The method was permitted to obtain a detection limit of 0.09 ng mL⁻¹ and two linear calibration ranges from 0.6 to 1.0 and 1.0 to 80.0 ng mL⁻¹ Se. The precision (%RSD) of the extraction and determination for the six replicates of Se at 20 ng mL⁻¹ was better than 3.6% and the enrichment factor of 63.5 was achieved. The studied analyte was successfully extracted and determined with high efficiency using cloud point extraction method in water and biological matrices.     

Determination of quinocide as impurity in primaquine tablets by capillary zone electrophoresis

A capillary zone electrophoretic method has been developed and validated for the determination of the impurity quinocide (QC) in the antimalarial drug primaquine (PQ). Different buffer additives such as native cyclodextrins and crown ethers were evaluated. Promising results were obtained when either β‐cyclodextrin (β‐CD) or 18‐crown‐6 ether (18C6) were used. Their separation conditions such as type of buffer and its pH, buffer additive concentration, applied voltage capillary temperature and injection time were optimized. The use of 18C6 offers slight advantages over β‐CD such as faster elution times and improved resolution. Nevertheless, migration times of less than 5 min and resolution factors (R_s) in the range of 2–4 were obtained when both additives were used. The method was validated with respect to selectivity, linearity, limits of detection and quantitation, analytical precision (intra‐ and inter‐day variability) and repeatability. Concentrations of 2.12 and 2.71% (w/w) of QC were found in pharmaceutical preparations of PQ from two different manufacturers. A possible mechanism for the successful separation of the isomers is also discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Charge-transfer complexes of barbiturates and phenytoin

Simple and sensitive spectrophotometric methods are described, for the first time, for the determination of sodium salts of phenobarbital (1), thiopental (2), methohexital (3) and phenytoin (4). The methods are based on the reaction of these drugs as n-electron donors with the sigma-acceptor iodine and various pi-acceptors: 7,7,8,8-tetracyanoquinodimethane; 2,3-dichloro-5,6-dicyano-1,4-benzoquinone; 2,3,5,6-tetrachloro-1,4-benzoquinone; 2,3,5,6-tetrafluoro-1,4-benzoquinone; 2,5-dichloro-3,6-dihydroxy-1,4-benzoquinone; tetracyanoethylene and 2,4,7-trinitro-9-fluorenon. Depending on the solvent polarity, different coloured charge-transfer complexes and radicals were developed. Different variables and parameters affecting the reactions were studied and optimized. The formed complexes were examined by UV/VIS, infrared and (1)H-NMR. Due to the rapid development of colours at ambient temperature, the obtained results were used on thin layer chromatograms for the detection of the investigated compounds. Beer's plots were obeyed in a general concentration range of 1-400 mug ml(-1) for the investigated compounds with different acceptors. Interference from some co-formulated drugs was also studied. No interference was observed due to additives commonly present in the pharmaceutical preparations. The proposed methods could be applied successfully to the determination of the investigated compounds in pure and pharmaceutical dosage forms with good accuracy and precision, the recoveries ranged from 98.7+/-0.5 to 101.1+/-0.5%. The results were compared favourably with the official methods.     

3-Chloropropyl and 4-chlorobutyl phenyl ethers as sources of 1, 3-dilithiopropane and 1,4-dilithiobutane: sequential reaction with carbonyl compounds

The reaction of 3-chloropropyl and 4-chlorobutyl phenyl ethers (1) with lithium powder and a catalytic amount of DTBB (5% molar) in THF at -78 degrees C followed by successive treatment with a carbonyl compound [R(1)R(2)CO = Bu(t)CHO, Me(2)CO, (CH(2))(5)CO, (-)-menthone] at -78 to 20 degrees C and, after 1.5 h at this temperature, with a second one [R(3)R(4)CO = Bu(t)CHO, PhCHO, Me(2)CO, MeCOPr(n), (CH(2))(5)CO, (-)-menthone] at -78 degrees C leads, after hydrolysis with water, to the corresponding 1,5- and 1, 6-diols (2). Because of the competition of two different reductive cleavages, 1,4- and 1,5-diols 3 were also obtained as side-reaction products.     

Solvent effects on the electronic absorption spectra and acid strength of some substituted pyridinols.

The electronic absorption spectra of some substituted pyridinols in organic solvents of different polarities are studied. Also, the solvent effects on the intramolecular charge transfer bands are discussed using various solvent parameters. The acid-base equilibria of the compounds used are studied spectrophotometrically in various mixed aqueous solvents at 25 degrees C and 0.1 M ionic strength (NaClO4). Furthermore, the influence of the solvents on the dissociation constants and tautomeric equilibria of a pyridinol derivatives are discussed. The effect of molecular structure of the pyridinols on the pK's is also examined.     

Tetronamides as latent acyclic vinylogous amides in formal aza-[3 + 3] cycloaddition reactions with alpha,beta-unsaturated iminium salts. An unexpected rearrangement and an approach to synthesis of substituted piperidines

A detailed account regarding formal aza-[3 + 3] cycloaddition reactions of tetronamides with alpha,beta-unsaturated iminium salts is described here. This investigation uncovers regioisomeric cycloadducts that were not found in previous studies involving this formal cycloaddition and an unexpected rearrangement that led to pyridines and dihydropyridines. Both stereochemical and regiochemical issues raised in this study provide further mechanistic insights into this cycloaddition. With careful control of reaction temperatures, the desired formal cycloadducts are obtained. Ensuing transformation of these cycloadducts into functionalized piperidines establishes the concept of employing tetronamides as latent acyclic vinylogous amides for the formal aza-[3 + 3] cycloaddition.