A thermostated coupled apparatus for the simultaneous determination of adsorption isotherms and differential enthalpies of adsorption at high pressure and high temperature

In order to assess and improve the quality of high pressure and temperature adsorption isotherms and differential enthalpies of adsorption on microporous and mesoporous materials, a specific thermostated device comprising a differential heat flow calorimeter coupled with a home-built manometric system has been built. The differential heat flow calorimeter is a Tian Calvet Setaram C80 model which can be operated isothermally, the manometric system is a stainless steel homemade apparatus. The thermostated coupled apparatus allows measurements for pressure up to 2.5?MPa and temperature from 303 to 423?K. Reliability and reproducibility were established by measuring adsorption isotherms on a benchmark sorbent (Filtrasorb F400). A detailed experimental study of the adsorption of pure carbon dioxide and methane has been made on activated carbons (Filtrasorb F400 and EcoSorb); a new procedure for determining the differential enthalpies of adsorption based on the stepwise method is also proposed. The error in the determination of the amount adsorbed is about 3.6%, and the error in the determination of the differential enthalpies of adsorption is 4%.     

New eco-friendly animal bone meal catalysts for preparation of chalcones and aza-michael adducts

ABSTRACT: Two efficient reactions were successfully carried out using Animal Bone Meal (ABM) and potassium fluoride or sodium nitrate doped ABMs as new heterogeneous catalysts under very mild conditions. After preparation and characterization of the catalysts, we first report their use in a simple and convenient synthesis of various chalcones by Claisen-Schmidt condensation and then in an aza-Michael addition involving several synthesized chalcones with aromatic amines. All the reactions were carried out at room temperature in methanol; the chalcone synthesis was also achieved in water environment under microwave irradiation. Doping ABM enhances the rate and yield at each reaction. Catalytic activities are discussed and the ability to re-use the ABM is demonstrated. RESULTS: For Claisen-Schmidt the use of ABM alone, yields never exceeded 17%. In each entry, KF/ABM and NaNO3/ABM (79-97%) gave higher yields than using ABM alone under thermic condition. Also the reaction proceeded under microwave irradiation in good yields (72-94% for KF/ABM and 81-97% for NaNO3/ABM) and high purity. For aza-Michael addition the use of ABM doped with KF or NaNO3 increased the catalytic activity remarkably. The very high yields could be noted (84-95% for KF/ABM and 81-94% for NaNO3/ABM). CONCLUSION: The present method is an efficient and selective procedure for the synthesis of chalcones anaaza-Michael adducts. The ABM and doped ABMs are a new, inexpensive and attractive solid supports which can contribute to the development of catalytic processes and reduced environmental problems.     

Kinetics of Free Radical Copolymerization. V. Copolymerization of Ethyl Acrylate with Styrene. Composition of Copolymers

The composition of copolymers formed at 50°C in ethyl acrylate/ styrene/azo-bis-isobutyronitrile/benzene systems of different composition was investigated. The experimental composition data (based on the elementary analysis of copolymers) were evaluated by the η-ζ transformation method. Finite monomer conversions were taken into account. The classical composition equation was found to describe the system under investigation. The reactivity ratios are p ₁ = 0.152 ± 0.006; p ₂ = 0.787 ± 0.023. The free radical copolymerization of ethyl acrylate and styrene has been investigated in benzene solution at 50°C. Our results on the initiation kinetics were disclosed in our recent publication [1]. Now we are reporting on our studies concerning the composition of ethyl acrylate/styrene copolymers.     

TG and DSC analyses of eucalyptus black liquor as alternative methods to estimate solids content

As a consequence of the continuous increase in the production rate of pulp and paper mills around the world, a great quantity of black liquor, a by-product of the wood digestion process, is produced. This by-product has a great potential as biomass, but needs to be concentrated to higher solids content to be burned as fuel in a recovery boiler. This is necessary to make the pulping process economically feasible, incinerating black liquor to produce high pressure steam, recycling inorganic chemicals to the process. The greater the solids content in black liquor, the better the combustion process in the boiler. Nevertheless, concentration of solids in black liquor above 75 mass/%, causes scaling formation on the heat transfer surfaces of evaporators and concentrators, due to the precipitation of sodium salts, reducing the overall efficiency of this equipment. The aim of this work is to evaluate the use of thermal analyses techniques, TG and DSC, as alternative methods to estimate solids content in eucalyptus black liquor samples since this information is essential to understand scaling formation process, allowing actions to reduce this industrial problem. Traditional techniques applied to determine solids content use gravimetric methods, which are simple, fine, but take a lot of time to be executed. Thermal analyses have proved to be very accurate and have the advantage to be faster than the traditional techniques. On the other hand, the cost-benefit relationship of the traditional technique is much greater and the final decision which one should be used depends on the conditions available.     

Detrimental effect of the 6 His C-terminal tag on YedY enzymatic activity and influence of the TAT signal sequence on YedY synthesis

Background

YedY, a molybdoenzyme belonging to the sulfite oxidase family, is found in most Gram-negative bacteria. It contains a twin-arginine signal sequence that is cleaved after its translocation into the periplasm. Despite a weak reductase activity with substrates such as dimethyl sulfoxide or trimethylamine N-oxide, its natural substrate and its role in the cell remain unknown. Although sequence conservation of the YedY family displays a strictly conserved hydrophobic C-terminal residue, all known studies on Escherichia coli YedY have been performed with an enzyme containing a 6 histidine-tag at the C-terminus which could hamper enzyme activity.

Results

In this study, we demonstrate that the tag fused to the C-terminus of Rhodobacter sphaeroides YedY is detrimental to the enzyme’s reductase activity and results in an eight-fold decrease in catalytic efficiency. Nonetheless this C-terminal tag does not influence the properties of the molybdenum active site, as assayed by EPR spectroscopy. When a cleavable His-tag was fused to the N-terminus of the mature enzyme in the absence of the signal sequence, YedY was expressed and folded with its cofactor. However, when the signal sequence was added upstream of the N-ter tag, the amount of enzyme produced was approximately ten-fold higher.

Conclusion

Our study thus underscores the risk of using a C-terminus tagged enzyme while studying YedY, and presents an alternative strategy to express signal sequence-containing enzymes with an N-terminal tag. It brings new insights into molybdoenzyme maturation in R. sphaeroides showing that for some enzymes, maturation can occur in the absence of the signal sequence but that its presence is required for high expression of active enzyme.

     

Ecotoxicological characterisation of exhaust particulates from diesel-powered light-duty vehicles

Diesel exhaust is one of the major sources of fine and ultrafine particulate matter in urban air. Toxicity of diesel-powered engine emissions has been quite widely assessed, however, much less information is available on their ecotoxicity. In our study the kinetic version of the Vibrio fischeri bioluminescence inhibition bioassay, based on the ISO 21338:2010 standard, was used to characterise the ecotoxicity of diesel-powered cars. The method is sensitive enough to test the ecotoxic effect of the emission of individual vehicles. In general, significant positive correlation was found between ecotoxicity (expressed as Toxic Unit /TU/values) and total carbon (TC) as well as between TU and polycyclic aromatic hydrocarbon (PAH) concentrations.      

Atypical Oxidation Reaction by Thionyl Chloride: Easy Two‐Step Synthesis of N‐Alkyl‐1,4‐dithiines

Easy two‐step synthesis of a series of dithiines was performed from succinic anhydride via cyclization of the corresponding 4‐(alkylamino)‐4‐oxobutanoic acids (succinamic acids). The reaction, carried out in polar aprotic solvents, gave 4,8‐dithiine‐indacene‐1,3,5,7‐tetraones (diimides 3) via 3,7‐bis‐4,8‐dithia‐indacene‐1,5‐diones (diisoimides 2), which could be isolated. Surprisingly, in this reaction, thionyl chloride appeared as an oxidant, and this process seemed to be useful for the syntheses of S‐containing heterocyclic compounds such as 1,4‐dithiins. A mechanistic pathway was considered.     

Unexpected Ritter Reaction During Acid‐Promoted 1,3‐Dithiol‐2‐one Formation

A series of aryl‐substituted 1,3‐dithiol‐2‐ones was prepared by the Bhattacharya? Hortmann cyclization method. Unexpectedly, a Ritter reaction occurred during the acid‐catalyzed cyclization at the cyano group of the aryl substituents and 1,3‐dithiol‐2‐ones bearing a carboxy or a carboxamide group could be selectively obtained (see 1 and 2a in Scheme 1). The formation of the acid or the amide functionality was temperature‐dependent so that the one or the other group could be introduced selectively by modifying the reaction temperature.     

The Synthesis of 17-Ester of Corticosteroids Protection of 11β-Hydroxyl by the Trimethylsilyl Group

17–Esters of corticosteroids have received considerable attention due to their high topical anti-inflammatory activity. one of the best known is betamethasone 17-valerate which is widely used against a variety of skin diseases². The relatively simple compound, hydrocortisone 17–butyrate (3a)³ proved to be as active topically as the more sophisticated corticosteroids such as triamcinolone acetonide, while its systemic activity is of the same order as that of hydrocortisone⁴.     

Electric migration of α‐hemolysin in supported n‐bilayers: A model for transmembrane protein microelectrophoresis

Proteome analysis involves separating proteins as a preliminary step toward their characterization. This paper reports on the translational migration of a model transmembrane protein (α‐hemolysin) in supported n‐bilayers (n, the number of bilayers, varies from 1 to around 500 bilayers) when an electric field parallel to the membrane plane is applied. The migration changes in direction as the charge on the protein changes its sign. Its electrophoretic mobility is shown to depend on size and charge. The electrophoretic mobility varies as 1/R², with R the equivalent geometric radius of the embedded part of the protein. Measuring mobilities at differing pH in our system enables us to determine the pI and the charge of the protein. Establishing all these variations points to the feasibility of electrophoretic transport of a charged object in this medium and is a first step toward electrophoretic separation of membrane proteins in n‐bilayer systems.