Application of nanofluids to a heat pipe liquid-block and the thermoelectric cooling of electronic equipment

Microprocessor power dissipation is constantly increasing. An increase in microprocessor size has also resulted in higher heat fluxes. The growth of information technology has rapidly increased over the past few years, causing an increase in the demand for a microprocessor that has a very high computing ability. The previous generation of central processing units (CPU) had 1.17 billion transistors planted in it, which indicates that a significant amount of heat was generated. The total heat dissipation resulting from a high end CPU is approximately 110-140 W, which will increase if the CPU voltage and frequency increase. Conventional air-cooled cooling systems are no longer adequate to remove these heat fluxes. For a number of applications, direct air-cooling systems will have to be replaced or enhanced by other high performance compact cooling techniques. In this study, the application of nanofluids as the working fluid on a heat pipe liquid-block combined with thermoelectric cooling is investigated. The type and effect of volume concentrations of nanofluids, coolant temperature, and thermoelectricsystem as heat pumps of a PC on the CPU’s temperature are considered. The results obtained from this technique are compared to those from other conventional cooling techniques. The heat pipe liquid-block combined with the thermoelectric system has a significant effect on heat transfer from the CPU. The higher thermal performance heat pipe liquid-block and thermoelectric cooled system with nanofluids proved its potential as a working fluid.     

Dilution method study on the interfacial composition, thermodynamic properties and structural parameters of W/O microemulsions stabilized by 1-pentanol and surfactants in absence and presence of sodium chloride

The phase behaviors, interfacial composition, thermodynamic properties and structural characteristics of water-in-oil microemulsions under varied molar ratio of water to surfactant (omega) at 303 K and also by varying temperatures at a fixed omega(=40) by mixing with 1-pentanol and decane or dodecane in absence and presence of sodium chloride have been studied by the method of dilution. The surfactants used were cetyl pyridinium chloride (CPC), sodium dodecyl sulfate (SDS) and polyoxyethylene (23) lauryl ether (Brij-35). The compositions of 1-pentanol and the surfactant at the interfacial region, the distribution of 1-pentanol between the interfacial region and the continuous oil phase, and the effective packing parameter (P(eff)) at the threshold level of stability have been estimated. The thermodynamics of transfer of 1-pentanol from the continuous oil phase to the interface have been evaluated. The structural parameters viz. radii of the droplet (R(e)) and the waterpool (R(w)), effective thickness of the interfacial layer (d(I)), average aggregation numbers of surfactants (N (s)) and the cosurfactant (1-pentanol) (N (a)) and the number of droplets (N(d)) have also been estimated. The prospect of using these w/o microemulsions for the synthesis of nanoparticles with small size, have been discussed in the light of the radii of the droplet, and waterpool, the extent of variation of effective thickness of the droplet under varied molar ratio of water to surfactant and temperature. An attempt has been made to rationalize the results in a comprehensive manner.     

Working group report: Heavy-ion physics and quark-gluon plasma

This is the report of Heavy Ion Physics and Quark-Gluon Plasma at WHEPP-09 which was part of Working Group-4. Discussion and work on some aspects of quark-gluon plasma believed to have created in heavy-ion collisions and in early Universe are reported.     

Ultra smooth NiO thin films on flexible plastic (PET) substrate at room temperature by RF magnetron sputtering and effect of oxygen partial pressure on their properties

Transparent p-type nickel oxide thin films were grown on polyethylene terephthalate (PET) and glass substrates by RF magnetron sputtering technique in argon + oxygen atmosphere with different oxygen partial pressures at room temperature. The morphology of the NiO thin films grown on PET and glass substrates was studied by atomic force microscope. The rms surface roughnesses of the films were in the range 0.63-0.65 nm. These ultra smooth nanocrystalline NiO thin films are useful for many applications. High resolution transmission electron microscopic studies revealed that the grains of NiO films on the highly flexible PET substrate were purely crystalline and spherical in shape with diameters 8-10 nm. XRD analysis also supported these results. NiO films grown on the PET substrates were found to have better crystalline quality with fewer defects than those on the glass substrates. The sheet resistances of the NiO films deposited on PET and glass substrates were not much different; having values 5.1 and 5.3 kΩ/□ and decreased to 3.05, 3.1 kΩ/□ respectively with increasing oxygen partial pressure. The thicknesses of the films on both substrates were ∼700 nm. It was also noted that further increase in oxygen partial pressure caused increase in resistivity due to formation of defects in NiO.     

Beneficial role of carbon nanotubes on mustard plant growth: an agricultural prospect

Nowadays an increasing application of nanotechnology in different fields has arisen an extensive debate about the effect of the engineered nanoparticles on environment. Phytotoxicity of nanoparticles has come into limelight in the last few years. However, very few studies have been done so far on the beneficial aspects of nanoparticles on plants. In this article, we report the beneficial effect of multi-walled carbon nanotubes (MWCNTs) having diameter of ~30 nm on Brassica juncea (mustard) seeds. Measurements of germination rate, T ₅₀ (time taken for 50% germination), shoot and root growth have shown encouraging results using low concentration of oxidized MWCNT (OMWCNT) treated seeds as compared to non-oxidized as well as high concentration OMWCNT treated seeds. For toxicity study we measured the germination index and relative root elongation, while conductivity test and infra-red spectra were also performed to study the overall effect of oxidized and non-oxidized nanotubes on mustard seeds and seedlings.     

Exploring molecular fingerprints of selective PPARδ agonists through comparative and validated chemometric techniques

Peroxysome proliferator-activated receptors (PPARs) have grown greatly in importance due to their role in the metabolic profile. Among three subtypes (α, γ and δ), we here consider the least investigated δ subtype to explore the molecular fingerprints of selective PPARδ agonists. Validated QSAR models (regression based 2D-QSAR, HQSAR and KPLS) and molecular docking with dynamics analyses support the inference of classification-based Bayesian and recursive models. Chemometric studies indicate that the presence of ether linkages and heterocyclic rings has optimum influence in imparting selective bioactivity. Pharmacophore models and docking with molecular dynamics analyses postulate the occurrence of aromatic rings, HB acceptor and a hydrophobic region as crucial molecular fragments for development of PPARδ modulators. Multi-chemometric studies suggest the essential structural requirements of a molecule for imparting potent and selective PPARδ modulation.