新型热反应大分子单体的合成与表征

溶液法合成了一些低分子量的羟端基低聚苯醚砜,并由相转移催化剂将之转为热反应大分子单体——α,ω-双甲基丙烯酸聚苯醚砜酯;用FTIR、~1H-NMR对其结构进行了表征,GPC、VPO对其分子量进行了分析和测定;用DSC、DTA对聚苯醚砜双烯大分子单体的转变温度、热反应过程进行了测定和分析。     

Cr/CeO2体系及其对乙烷脱氢反应催化性能的研究

The dehydrogenation reaction of ethane over Cr/CeO₂ catalysts in presence of CO₂ was studied with fixed-bed micro-reactor. The Cr/CeO₂ catalysts of different Cr loading have been synthesized using impregnation techniques. The Cr/CeO₂ system has already been found to be active and selective in the reaction at around 740 ℃. The function of carbon dioxide is to remove coke and hydrogen to accelerate dehydrogenation of ethane. The results of catalysts characterizations indicated that Cr³⁺ and Cr⁶⁺ occurred on the surface of the catalysts. The 1.2 mmol Cr/100m₂ CeO₂ catalyst sample with a monolayer dispersion of Cr on CeO₂ support showed a stronger surface acidity and a maximum yield of ethylene of about 35.5% at 36.6% conversion of ethane.     

测定水性聚氨酯树脂平均相对分子质量及其分布的高效凝胶渗透色谱法

选用HP PL gel MIXED-B柱双柱串联，四氢呋喃作流动相，紫外吸收检测器测定了水性聚氨酯树脂的平均相对分子质量及其分布；通过一系列的条件试验，确定了最佳的凝胶色谱（GPC）条件，结果令人满意；该研究有助于了解水性聚氨酯树脂性能，有效地指导工艺生产和基础研究。     

萃取有机相中微乳液的稳定性研究

赊P507钾盐外，PSO7理、钠、按盐和P204的理、钠、钾、按以及有机接盐等与醇一油一水在一定条件下都能形成微乳液．因此，进一步搞清这些体系形成微乳液的结构、性质和稳定性，对革取化学研究是十分重要的．我们曾对PSO7（K）一醇一正庚烷一水四组分体系的结构参数［’j和物理化学性质［’］进行过研究，观察到辅助表面活性剂性质和含水量对微乳液结构有重要的影响·本文采用测定微乳液电导的变化，研究含有不同醇和不同量水时，P507（K）在革取有机相中形成微乳液颗粒的活化能（凸E），并用凸E的大小来描述和比较微乳液的界面膜强度…     

草酸电还原制取乙醛酸的研究

研究了由草酸电解还原制备乙醛酸时，温度、草酸纯度、电解时间、电极状态和电解产物对电流效率和产率的影响。实验发现，除温度和原料纯度是重要的影响因素外，电极表面的有机物吸附和电解产物－乙醛酸的浓度具有更大的影响。     

Studies on Artificial Imitation of Glutathione Peroxidase by Chemical Mutation

ＳｔｕｄｉｅｓｏｎＡｒｔｉｆｉｃｉａｌＩｍｉｔａｔｉｏｎｏｆＧｌｕｔａｔｈｉｏｎｅＰｅｒｏｘｉｄａｓｅｂｙＣｈｅｍｉｃａｌＭｕｔａｔｉｏｎＤＩＮＧＬａｎ；ＺＨＵＺｈｅｎ－ｑｉ；ＬＵＯＧｕｉ－ｍｉｎ；ＳＵＮＱｉ－ａｎ；ＹＡＮＧＴｏｎｇ－ｓｈｕａｎｄＳＨ...     

具有稳定可见光催化活性TiO2薄膜的常温制备

采用溶胶-凝胶法，通过钛酸丁酯水解制备了具有锐钛矿-金红石-板钛矿混晶晶粒的TiO₂溶胶。以四磺酸酞菁铜(CuTsPc)为敏化剂，经水浴加热后获得具有可见光响应活性的TiO₂溶胶。使用该溶胶浸渍-提拉涂膜，在室温下晾干即可得到酞菁敏化的TiO₂薄膜(CuTsPc-TiO₂)。对敏化溶胶的制备条件及薄膜的性能进行了考察，并探讨了CuTsPc的负载机理。结果表明:延长水浴时间或提高TiO₂溶胶中的CuTsPc浓度有利于增大薄膜中CuTsPc的负载量。随着薄膜中CuTsPc量的增加，薄膜的可见光催化活性增强，但CuTsPc负载过多又会导致薄膜光催化活性降低。CuTsPc通过静电作用在TiO₂胶粒表面发生吸附，从而实现在薄膜中均匀、牢固的负载，保证了CuTsPc-TiO₂薄膜在循环使用过程中的稳定性。     

Determining PPARγ-ligand binding affinity using fluorescent assay with cis-parinaric acid as a probe

Upon the study of small-molecules binding to proteins, the traditional methods for calculating dissociation constants (Kd and Ki) have shortcomings in dealing with the single binding site models. In this paper, two equations have been derived to solve this problem. These two equations are independent of the total concentration or initial degree of saturation of receptor and the activity of the competitive molecule. Through nonlinear fitting against these two equations, Kd value of a probe can be obtained by binding assay, and Ki value of a ligand can be obtained by competitive assay. Moreover, only the total concentrations of receptor([R]t), ligand([L]t) and probe([P]t) are required for the data fitting. In this work, Ki values of some typical ligands of PPARγ were successfully determined by use of our equations, among which the Ki value of PPARγ-LY171883 was reported for the first time.     

Ring-opening Polymerization of e-Caprolactone Using Lanthanide Tris(4-tert-butylphenolate)s as a Single-component Initiator

The ring-opening polymerization of e-caprolactone (CL) initiated by novel single lanthanide tris(4-tert-butylphenolate)s [Ln(OTBP)3] is reported. Single-component La(OTBP)3 can effectively prepare polycaprolactone (PCL) with over 90% yield and viscosity average molecular weight about 60 x 10 under quite mild conditions: molar ratio of CL to initiator is 1000, 60 C, 2 h in toluene. Mechanism study indicates that the monomer inserts into the growing chain via the break of acyl-oxygen bond of CL.     

A New Application of Carbon Nanotubes Constructing Biosensor

Carbon nanotubes used for constructing biosensor was described for the first time. Single-wall carbon nanotubes (SWNTs) functionalized with carboxylic acid groups were used to immobilize glucose oxidase forming a glucose biosensor. The biosensor response can be determined by amperometric method at a low applied potential (0.40V).