Berry Phase of Composite System Induced by Time-Dependent Interaction

The Berry phase in a composite system induced by the time-dependent interaction is discussed. We choose two coupled spin-1/2 systems as the composite system： one of the subsystems is subjected to a static magnetic field, and the coupling parameters between two spins are controllable in time. We show that the time-dependent interaction can induce the Berry phase in a similar way as that a spin-1/2 system （qubit） is driven by an effective time-dependent magnetic field. Furthermore, using two consecutive cycles with opposite directions of both the static magnetic field as well as opposite signs of the coupling parameters, a nontrivial two-qubit unitary transformation purely based on Berry phases can be constructed.     

热退火对SiO_2∶Er薄膜发光特性的影响

利用离子注入法制备SiO2∶Er样品,并在不同温度下进行退火处理。通过微区拉曼光谱、吸收光谱、X射线光电子能谱等手段对其进行结构表征,并进行了室温和变温的光致发光特性研究,得到了可见区和红外区的光致发光。其中,4S3/2→4I15/2的发光强度随温度的升高,先增强后减弱,呈现出反常的温度淬灭效应,此现象是由Er3 与SiO2的缺陷之间的能量传递造成的。     

非视线散射大气光通信的光学天线

由于大气衰减的影响,非视线散射大气光通信需要使用光学天线以提高对光信号的采集能力,进而增加通信距离。针对非视线大气光通信的需求,利用ZEMAX软件对半球透镜、复合抛物面聚光器（CPC）和卡塞格伦望远镜等光学天线进行了性能分析。分析表明：半球透镜和CPC视场较大,增益值高。利用蒙特卡罗法模拟计算了一定条件下,非视线散射光通信在有无半球透镜或CPC作光学天线时到达探测元件的能量随通信距离的变化。结果表明：CPC聚光能力更强,适合作为非视线散射光通信的光学天线。     

Eye-Safe Raman Laser at μm Based on BaWO4 Crystal

Using an external couple cavity and a pump beam compression system, efficient 1.5 μm eye-safe Raman laser is obtained based on BaWO4 crystal. The largest output energy is 8.5mJ, corresponding to an electric-optical conversion efficiency of 47%.     

Continuous-Variable Entanglement Transfer from Cavity Field to Two Mesoscopic Josephson Junctions

We consider a composite system of two remote mesoscopic dosephson junctions interacting locally with a two-mode non-classical cavity field and investigate entanglement transfer from a bipartite continuous-variable （CV） system to a pair of localized mesoscopic dosephson junctions. We obtain analytically the time-dependent characteristic functions in the Wigner representation for the two CV subsystems, where two cases are considered for the zero and finite temperatures. Furthermore, we analyse the influences of the temperature on the period recovery of the entanglement.     

Quantum Logic Network for Cloning a State Near a Given One Based on Cavity QED

A quantum logic network is constructed to simulate a cloning machine which copies states near a given one. Meanwhile, a scheme for implementing this cloning network based on the technique of cavity quantum electrodynamics （QED） is presented. It is easy to implement this network of cloning machine in the framework of cavity QED and feasible in the experiment.     

环氧树脂/石墨双极板复合材料的性能分析

以固态环氧树脂(EP)粉与石墨(G)粉混合物为原料,通过低温热压烧结制得一种双极板材料.研究了EP/G复合材料的弯曲强度和电导率随环氧树脂含量、模压温度和保温时间的影响变化.结果表明:随着环氧树脂含量的增加,EP/G复合材料的弯曲强度呈先上升后下降趋势,在EP含量为10;(质量分数)时达到最大,而电导率呈下降趋势;随模压温度的升高,EP/G复合材料的弯曲强度逐渐变大,电导率则先增长后降低;随着保温时间的延长,EP/G复合材料的弯曲强度和电导率都呈现先增长后降低的变化趋势;环氧树脂含量为10;质量分数,模压温度为275 ℃,保温时间为100 min时,所得复合材料弯曲强度为53.11 Mpa,电导率达到209.25 S/cm.     

全固态锂金属电池表界面化学的研究进展

传统的锂金属电池存在电解液易泄漏、 易燃等安全隐患, 因此开发不燃性全固态电解质对于解决锂金属电池安全问题至关重要, 而如何有效降低固体电解质与电极之间的界面电阻是发展高性能全固态锂金属电池的关键. 针对如何优化全固态锂金属电池表界面的问题, 本文综述了全固态锂金属电池电极和电解质表面修饰的最新研究进展, 对提高界面接触和降低界面电阻的传统方法进行了探讨, 分析并点评了新型的表面修饰技术, 为进一步提高全固态锂金属电池的综合性能提供新思路. 最后, 对全固态锂金属电池的研究前景进行了展望.     

南海红树林内生真菌No．ZZF71代谢产物研究

由于海洋环境的特殊性和微生物在生态系统的功能,海洋微生物已经发展出独特的代谢方式,提供了在陆地微生物中未遇到过的代谢产物。研究海洋微生物的活性物质,不但能发现结构新颖的化合物,丰富和发展有机化学理论,而且为寻找新的强效活性药物及其它有用物质提供了一个重要途径[1     

羟基磷灰石/丝素蛋白复合纤维的制备及其矿化研究

在以静电纺丝法制备羟基磷灰石(HAP)/丝素蛋白(SF)复合纤维的前提下, 采用同轴共纺法获得了以HAP为“芯”、SF为“皮”的双组分电纺纤维(电纺膜), 并通过扫描和透射电镜、红外光谱以及X射线衍射等手段对电纺纤维进行了表征. 结果表明, HAP均存在于上述两种方法制备的纳米纤维中, 但同轴共纺法不仅可以避免HAP/SF共混电纺时pH值对丝素蛋白结构的影响, 并且能大大提高电纺膜中HAP的含量. 同时, 我们还分别以SF纤维、HAP/SF复合纤维和HAP/SF“皮-芯”纤维作为有机基质, 对羟基磷灰石在其上的矿化过程进行了探索, 结果表明含较多羟基磷灰石的HAP/SF“皮-芯”纤维更有利于矿化的进行.