丝网印刷柔性电子器件

有机电子器件的主要优势之一是溶液可处理性,这使得可以通过多种印刷方法制备有机电子器件。丝网印刷作为一种十分成熟的印刷方法,被广泛应用于微电子器件的制备。本文主要从丝网印刷的组成、影响丝网印刷精密度的因素以及丝网印刷在场效应晶体管、太阳能电池、有机发光二极管等柔性电子器件制备中的应用分别作以介绍,并对目前丝网印刷在印刷柔性电子器件中存在的困难和挑战作以总结。     

燃烧放热对准东煤成灰过程中钠盐释放的影响

选取典型的准东煤五彩湾煤为研究对象,在马弗炉内制备400-1200℃的燃烧灰和再热灰,采用K型热电偶测量燃烧过程中样品表面温度,通过XRF、XRD分析获得灰的成分和结晶形式,取部分灰样逐级萃取,通过微波消解及电感耦合等离子体质谱仪(ICP-MS),获得灰中钠的赋存特性。结果表明,燃烧和再热灰在成分和晶体形式上差异显著,再热灰钠含量明显高于燃烧灰且灰熔点偏低;随着温度升高灰中钠盐总量明显减少,其中,水溶钠、醋酸铵溶钠迅速减少,而盐酸溶钠含量先增加后减少,不可溶钠增加,释放的钠以可溶钠为主;加热温度和时间影响钠的释放,燃烧反应放热导致煤粉表面温度超过环境温度200℃以上,是钠盐过多释放的主要原因。     

Confined Ultrathin Pd‐Ce Nanowires with Outstanding Moisture and SO2 Tolerance in Methane Combustion

An efficient strategy (enhanced metal oxide interaction and core–shell confinement to inhibit the sintering of noble metal) is presented confined ultrathin Pd‐CeO_x nanowire (2.4 nm) catalysts for methane combustion, which enable CH₄ total oxidation at a low temperature of 350 °C, much lower than that of a commercial Pd/Al₂O₃ catalyst (425 °C). Importantly, unexpected stability was observed even under harsh conditions (800 °C, water vapor, and SO₂), owing to the confinement and shielding effect of the porous silica shell together with the promotion of CeO₂. Pd‐CeO_x solid solution nanowires (Pd‐Ce NW) as cores and porous silica as shells (Pd‐CeNW@SiO₂) were rationally prepared by a facile and direct self‐assembly strategy for the first time. This strategy is expected to inspire more active and stable catalysts for use under severe conditions (vehicle emissions control, reforming, and water–gas shift reaction).     

Elasticity‐Dependent Fast Underwater Adhesion Demonstrated by Macroscopic Supramolecular Assembly

Macroscopic supramolecular assembly (MSA) is a recent development in supramolecular chemistry to associate visible building blocks through non‐covalent interactions in a multivalent manner. Although various substrates (e.g. hydrogels, rigid materials) have been used, a general design rule of building blocks in MSA systems and interpretation of the assembly mechanism are lacking and are required. Herein we design three model systems with varied elastic modulus and correlated the MSA probability with the elasticity. Based on the effects of substrate deformability on multivalency, we have proposed an elastic‐modulus‐dependent rule that building blocks below a critical modulus of 2.5 MPa can achieve MSA for the used host/guest system. Moreover, this MSA rule applies well to the design of materials for fast underwater adhesion: Soft substrates (0.5 MPa) can achieve underwater adhesion within 10 s with one order of magnitude higher strength than that of rigid substrates (2.5 MPa).     

Hydrophobic‐Force‐Driven Removal of Organic Compounds from Water by Reduced Graphene Oxides Generated in Agarose Hydrogels

Hydrophobic reduced graphene oxides (rGOs) were generated in agarose hydrogel beads (AgarBs) by NaBH₄ reduction of graphene oxides (GOs) initially loaded in the AgarBs. The resulting rGO‐loaded AgarBs were able to effectively adsorb organic compounds in water as a result of the attractive hydrophobic force between the rGOs in the AgarBs and the organic compounds dissolved in aqueous media. The adsorption capacity of the rGOs was fairly high even toward reasonably water‐soluble organic compounds such as rhodamine B (321.7 mg g^?1) and aspirin (196.4 mg g^?1). Yet they exhibited salinity‐enhanced adsorption capacity and preferential adsorption of organic compounds with lower solubility in water. Such peculiar adsorption behavior highlights the exciting possibility for adopting an adsorption strategy, driven by hydrophobic forces, in practical wastewater treatment processes.     

耐高盐碱蓬对湿地土壤中金属元素的富集特征研究

基于秦皇岛滨海湿地人工种植耐高盐碱蓬修复工程试验,通过分析湿地土壤沉积物及耐高盐碱蓬中不同金属元素的含量与变化,研究了耐高盐碱蓬对金属元素的富集特征。结果显示:湿地沉积物中Fe、Mn、Cr、Pb和Zn的浓度较高,分别为8 210. 94、110. 04、8. 78、8. 25、10. 95 mg/kg,Cd的浓度最低,平均值为0. 022 mg/kg,湿地试验区土壤中同一金属元素变异程度较小,分布较均匀。碱蓬体内重金属含量根据采集地点的不同有差异,但与各站位中土壤的重金属分布特征存在正相关性;其中碱蓬内Fe、Mn、Zn、Cu的平均含量相对较高,且Fe、Mn、Ni、Cu、As、Cd、Pb元素在碱蓬根中的平均含量高于茎叶,而Cr在茎中的平均含量最高,Zn和Mo在叶中的含量最高。碱蓬的根、茎、叶对Cd的富集效果最好,其次为Mo、Cu,对Fe、Mn、Zn、As和Pb的富集效果相对较差,说明碱蓬对沉积物中不同金属元素的富集移出率存在差异。金属元素在碱蓬中的转移系数研究表明,Mo、Zn、Cd和Mn等元素可由根部转移到叶中,而Fe、Ni、Pb、As和Cu等金属元素固定在根部,该研究可为利用碱蓬修复湿地重金属污染提供理论基础。     

Structural characterisation of a water-soluble polysaccharide from tissue-cultured Dendrobium huoshanense C.Z. Tang et S.J. Cheng

A water-soluble polysaccharide TC-DHPA4 with a molecular weight of 8.0 × 10⁵ Da was isolated from tissue-cultured Dendrobium huoshanense by anion exchange and gel permeation chromatography. Monosaccharide analysis revealed that the homogeneous polysaccharide was made up of rhamnose, arabinose, mannose, glucose, galactose and glucuronic acid with a molar ratio of 1.28:1:1.67:4.71:10.43:1.42. The sugar residue sequence analysis based on the GC-MS files and NMR spectra indicated that the backbone of TC-DHPA4 consisted of the repeated units:→6)-β-Galp-(1→6)-β-Galp-(1→4)-β-GlcpA-(1→6)-β-Glcp-(1→6)-β-Glcp-(→. The sugar residue sequences β-Glcp-(1→)-α-Rhap-(1→3)-β-Galp-(1→, β-Glcp-(1→4)-α-Rhap-(1→3)-β-Galp-(1→, β-Galp-(1→6)-β-Manp-(1→3)-β-Galp-(1→, and α-l-Araf-(1→2)-β-Manp-(1→3)-β-Galp-(1→ were identified as the branches attached to the C-3 position of (1→6)-linked galactose in the backbone.     

对苯二甲酸丁二酯-ε-己内酯多嵌段共聚物中硬链段的受限结晶

用差示扫描量热法（DSC）,广角X射线衍射（WAXD）,傅立叶变换红外光谱（FTIR）等技术研究了对苯二甲酸丁二酯-ε-己内酯（PBT—PCL）多嵌段共聚物中硬链段的受限结晶。结果表明,PBT—PCL共聚酯中软硬链段在非晶区的混容性比较好,不同组成的样品均显示出一个玻璃化转变温度;对硬段含量超过50%的共聚酯来说,硬链段可以结晶,而软链段不能结晶;由于硬链段的受限特点,BT硬链段的结晶受软链段的影响和制约,其结晶能力随硬段序列长度的增加而逐渐增大。