Political and economic rationality leads to velcro bifurcation

In this paper political and economic rationality is modelled regarding an economic problem with a four-dimensional dynamical system taking into consideration the information about the problem spread among the people who support the political alternatives. Under special parameter conditions velcro bifurcation occurs, which destabilizes the equilibrium points when information is going to spread. The last stable equilibrium point is related to the economically rational equilibrium point.     

The evolution of a truncated gaussian probability density through time—modelling animal liveweights after selection

The form of the probability density derived from the evolution in time of a previously truncated frequency distribution of animal Liveweights is of interest in animal husbandry. Truncated frequency distributions arise when the heavier animals are sold for slaughter and the lighter animals retained. The demands of modern quality assurance schemes require that, given information on animal growth, the farmer is able to estimate the number of animals that would meet the specifications at some time in the future after truncation. Assuming that animal growth can be described by a linear stochastic differential equation, we derive an explicit expression for the probability density of animal Liveweights at any time after the truncation of an initial Gaussian density. It is shown that this probability density converges rapidly to a Gaussian density, so that after about 20 days of typical growth rates for lambs, the resulting density is practically indistinguishable from Gaussian.     

Fold‐2‐covering triangular embeddings

For a graph G and a positive integer m, G_(m) is the graph obtained from G by replacing every vertex by an independent set of size m and every edge by m² edges joining all possible new pairs of ends. If G triangulates a surface, then it is easy to see from Euler's formula that G_(m) can, in principle, triangulate a surface. For m prime and at least 7, it has previously been shown that in fact G_(m) does triangulate a surface, and in fact does so as a “covering with folds” of the original triangulation. For m = 5, this would be a consequence of Tutte's 5‐Flow Conjecture. In this work, we investigate the case m = 2 and describe simple classes of triangulations G for which G₍₂₎ does have a triangulation that covers G “with folds,” as well as providing a simple infinite class of triangulations G of the sphere for which G₍₂₎ does not triangulate any surface. © 2003 Wiley Periodicals, Inc. J Graph Theory 43: 79–92, 2003     

Three-dimensional structure of Saccharomyces cerevisiae inorganic pyrophosphatase complexed with cobalt and phosphate ions

Crystals of Saccharomyces cerevisiae inorganic pyrophosphatase suitable for X-ray diffraction study were grown by cocrystallization of the enzyme with cobalt chloride and imidodiphosphate. Saccharomyces cerevisiae is a metal-dependent enzyme which catalyzes hydrolysis of inorganic pyrophosphate to orthophosphate. The three-dimensional structure of this enzyme was solved by the molecular-replacement method and refined at 1.8 Å resolution to an R factor of 19.5%. Cobalt and phosphate ions were revealed in the active centers of both identical subunits (A and B) of the pyrophosphatase molecule. In subunit B, a water molecule was found between two cobalt ions. It is believed that this water molecule acts as an attacking nucleophile in the enzymatic cleavage of the pyrophosphate bond. It was demonstrated that cobalt ions and a phosphate group occupy only part of the potential binding sites (two chemically identical and crystallographically independent subunits have different binding sites). The arrangement of ligands and the structure of the nucleophile-binding site are discussed in relation to the mechanism of action of the enzyme and the nature of the metal activator.     

Retardation characteristics and birefringence of a multiple-order crystalline quartz plate

A crystalline quartz plate of thickness 1.070 mm is calibrated between 370 and 794 nm. Throughout this spectral interval, the retardance varied by 32π and the plate introduced quarterwave retardance 16 times at different wavelengths. The birefringence (n_e−n_o) of crystalline quartz was calculated as a single quantity and varied from 0.00971 at 370 nm to 0.00891 at 794 nm. All measurements were carried out at 23°C.     

Performance of a CW pumped Nd:YVO4 amplifier with kHz pulses

Until recently, simple and reliable high repetition-rate laser sources with nanosecond pulses much shorter than from conventional A-O Q-switch lasers were not available. However over the past 2 years we have developed such lasers based on proprietary fast E-O switching technology, which allows designs delivering 1 ns pulses and subnanosecond jitter for good synchronisation. The technology provides pulses with multi-kW peak power and repetition-rates to >100 kHz.Most recently, the performance of these short pulse lasers has been developed further by implementing oscillator/amplifier (master oscillator and power amplifier, MOPA) technology which increases the output to >1 W average power. Here we report on a simple model that has been used to predict the performance of the CW pumped Nd:YVO₄ amplifier used in the MOPA laser. The model is based on the well-known expressions for the saturated gain applying to laser pulses, but more usually applied to pulse-excited amplifiers. The model is shown to allow a good interpretation of the amplifier behaviour for kHz pulses and to be a useful tool for predicting the performance of the MOPA laser.     

Composite polymeric electrolytes based on PMMA-LiCF3SO3-SiO2

Preliminary results on the mechanical, optical and electrical properties of composite gel electrolytes (CGEs) with fumed silica (SiO₂) as a filler added to gel polymeric electrolyte (GPE) based on PMMA, LiCF₃SO₃ and PC are presented in this paper. Added fumed silica is seen to enhance the mechanical properties of the GPE without changing the conductivity significantly. The high ionic conductivity (×10⁻³ S/cm), high transmission in the visible region and nominal variance of conductivity and viscosity over a wide temperature window show that these CGEs are potential electrolytes for electrochromic windows (ECWs).     

Hutchinson's shear coefficient for anisotropic beams

Timoshenko's theory of vibrating beams requires a shear correction factor to correctly take into account the effects of shear deformation for different beam cross-sections. This correction is crucial for a precise determination of the shear modulus from the resonant frequencies. Hutchinson's beam theory is used to derive a new shear correction coefficient for anisotropic materials. A comparison is made with other shear coefficients for anisotropic materials published in the literature. Computer-simulated spectra are used to validate the new anisotropic shear correction coefficient.     

Calculation of the vibrational spectra of copper crystals with vacancies

The local vibrational spectra of copper crystals containing vacancies are calculated using the pair atomic potential derived in the framework of the resonance pseudopotential theory. The calculations are performed by a recursive method with due regard for the symmetry of the defect region. The frequencies of the vacancy-induced resonance vibrations of different symmetries are determined.     

The action of an electron beam on dust structures in a plasma

The action of an electron beam on ordered dust structures in glow and low-pressure RF discharges was studied experimentally. The electron beam produces destruction and dynamic displacement of the dust structure. In the center of a dust structure, an electron beam with a low electron energy (tens of eV) at currents up to 1 mA caused structural disordering and “melting” in the region of its action but did not excite external crystal regions. Local action of an electron beam with a high electron energy (25 keV) and a beam current above 10 mA caused deformation of the whole dust structure and shifted it in the horizontal direction so that it was carried away from the RF discharge zone. The effect of dust structure displacements can be used to locally remove particles from a plasma.