Density of lithium fluoride—lithium carbonate-based molten salts

The density of the LiF-Li₂CO₃ melts system was measured using the Archimedean method. Using the quadratic regression orthogonal design with two factors, a regression equation for the density of LiF-Li₂CO₃ melts was obtained in which the concentration of LiF and temperature were considered. The results indicated that the density of the LiF-Li₂CO₃ melts decreased with either increasing the concentration of LiF or increasing temperature; a linear relation was observed between density and temperature. In addition, the influences of NaF, KF, NaCl, and KCl additives on the densities of the given systems were studied. The addition of NaF and KF increased the density of the melts, whereas NaCl and KCl resulted in an initial increase and subsequent decrease with an increasing additive concentration. The density attained a maximum at NaCl and KCl mass fraction of approximately 15%.     

Efficient method for the synthesis of polysubstituted 2,6-dicyanoanilines by one-pot three-component tandem reaction of malononitrile with <Emphasis Type="Italic">α</Emphasis>,<Emphasis Type="Italic">β</Emphasis>-unsaturated imines

A facile and efficient one-pot synthesis of polysubstituted benzenes was achieved via the Michael addition of malononitrile with α,β-unsaturated imines and a sequential tandem reaction. This reaction generates polysubstituted 2,6-dicyanoanilines in high yields (15 examples, isolated yields of 57–91 %), and proceeds under mild reaction conditions (60°C, 10 min). In addition, a possible mechanism accounting for the reaction is proposed.     

Synthesis and characterization of nano Ag end capped L-cysteine bridged diblock copolymer

The target of the present investigation is synthesis and characterization of an amphiphilic diblock copolymer with antibacterial property. Ring opening polymerization (ROP) of ε-caprolactone (CL) and tetrahydrofuran (THF) was carried out under inert atmosphere by using L-cysteine as a bridging agent in the presence of stannous octoate (SO) as a catalyst. The nano silver end capped diblock copolymer was synthesized by in situ method. Thus obtained nano silver end capped L-cysteine bridged diblock copolymer was characterized by various analytical methods like Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, circular dichroism (CD), fluorescence spectroscopy, gel permeation chromatography (GPC), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM) and zeta potential. The antimicrobial property of the nano silver end capped diblock copolymer against e-coli was tested.     

Flammability characterization and effects of magnesium oxide in halogen-free flame-retardant EVA blends

The effects of magnesium oxide(Mg O) on the flame retardant performance of intumescent systems based on ammonium polyphosphate(APP) and pentaerythritol(PER) in ethylene vinyl acetate copolymer(EVA) were studied. The results showed that Mg O affects both the quality and quantity of residual char. There is an optimal value for the loading amount of Mg O. More or less Mg O loading may cause the formation of defective char layers and worsen the flame retardancy of EVA. According to the results of limiting oxygen index(LOI), vertical flammability test(UL94 rating) and cone calorimetry(CONE), the best flame retardancy with a strong and well intumescent char is obtained from the sample with 1 wt% of Mg O, which has the highest LOI value of 27.9, UL94 rating of V-0 and the lowest peak heat release rate of 242 k W·m?2.     

Thermo- and pH-responsive fluorescence behaviors of sulfur-functionalized detonation nanodiamond-poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide)

Detonation nanodiamonds (DNDs) are emerging as bioimaging platforms due to their biocompability, small primary particle size, reactive surface, and stable fluorescence after modification. In this paper, a heteroatom engineering method is provided to fabricate the fluorescent DNDs through pyrolysis of dibenzyl disulfide. The quantum yield of these sulfur (S)-functionalized DNDs (SDNDs) increases with sulfur percentage. The solubility and stability of SDNDs in aqueous solution are also significantly increased due to the formation of hydrophilic sulfur groups on DND. Furthermore, these SDNDs are used to conjugate the stimuli-responsive poly(N-isopropylacrylamide) (PNIPAM) through the ‘graft from’ method. The conjugation demonstrated both pH- and thermo-responsive fluorescence behaviors, which shows promise to be used in ratiometric fluorescence sensing for the detection of intracellular pH and temperature values.     

Surface Treatment of Polyimide Substrates Using Dielectric Barrier Discharge Reactors Based on L-Shaped Electrodes

Plasma Chemistry and Plasma Processing - Two dielectric barrier discharge reactors, based on L-shaped electrodes, were designed and fabricated for in-line surface treatment of polyimide (PI)...     

A simple,fast and convenient new method for predicting the stability of nitro compounds

Journal of Computer-Aided Molecular Design - A new method has been proposed to understand and predict the stability of nitro compounds. This method uses the maximum electron densities at the...     

The significance of a second adsorption phase with weakly adsorbed species for the calculation of the surface concentrations of a mixture: methanol–DME and methanol–ethene adsorption in SAPO-34

With the calorimetric (adsorption heat versus coverage) curve also measured together with the adsorption isotherm, the simultaneous use of both curves showed that there were two phases of adsorption in the adsorption of methanol, dimethyl ether, ethene and propane in SAPO-34. The dual-site Langmuir equation gave good fits to the adsorption data to support the interpretation that a second (type 2) adsorption phase occurred in the high-pressure region in addition to a first (type 1) adsorption phase on the acid sites at lower pressures. Adsorption experiments and calculations using binary gas mixtures showed that due to the existence of two types of adsorption, the multicomponent Langmuir isotherm equation (Langmuir competitive adsorption model) calculated incorrect surface concentrations when the concentrations were high. In contrast, the ideal adsorbed solution theory (IAST) calculated correct surface concentrations in the adsorption of mixtures.     

Review of the preparation,characterization, and luminescence properties of Pr3+-doped CaTiO3 phosphors

Research on Chemical Intermediates - In this paper we review the luminescence properties of Pr3+-doped CaTiO3 phosphors, the different methods of sample preparation, and characterization of the...