一种求解透明薄膜椭偏方程的新方法

介绍用测量得到的椭偏参数ψ和Δ求解透明薄膜折射率和厚度的方法。该方法引入一个新的目标求解函数,减少了搜索参量的空间的维数,改善了函数的性态和收敛速度,缩短了计算时间。最后给出应用实例。     

First-principles investigation of pressure-induced changes in structural and electronic properties of Y 2C3 superconductor

The structural and electronic properties of Y ₂C₃ superconductor under different external pressures were calculated by employing the first-principles method. This shows that the lattice constants as well as the lengths of C-C dimers decrease with the pressure. Results of band structure calculations indicate that the Fermi level advances to the bonding zone with an increase in pressure; meantime, the valence and conduction bands intersect more deeply with the Fermi level. Moreover, the Fermi level is found to shift from the valley bottom of the density of states (DOS) curve to the shoulder, which means an increase in N(E_F), and therefore the critical temperature, T_c. The calculations verify that the critical temperature is directly related to the electronic structure.     

On electrochemistry of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-coated LiCoO<Subscript>2</Subscript> composite cathode with improved cycle stability

LiCoO₂-based cathode does still have a powerful competition in high-end mobile electronics due to its relatively high true density (about 5.2 g/cm³). When the operation potential range is extended, the improvement in its cycle stability has attracted more attention. The extension of its operation potential can be realized by partial replacement of Co by Ni and Mn or by surface modification. However, Ni and Mn replacing partial Co results in decreased true density; for example, the true density of LiNi_0.5Mn_0.3Co_0.2O₂ is about 4.6 g/cm³. In this case, the increase in its practical energy density is impossible. As a result, the surface modification technology becomes very important to extend its operation potential range. In this article, an Al₂O₃-coated LiCoO₂ cathode was synthesized. X-ray diffraction test did not show any impurity. Scanning electron spectroscopy measurements showed that the basic microstructure of pristine LiCoO₂ grain is sustained after coating Al₂O₃. The surface characteristic of pure and Al₂O₃-coated LiCoO₂ was also analyzed using an X-ray photoelectron spectroscopy (XPS) technique. Unusual XPS peaks of O 1s, Al 2p, and Co 2p binding energy were found and may be caused by the possible H existence in crystal structure. The electrochemical behavior was systematically investigated, and the cathode was cycled at different charge cutoff voltages (4.30～4.60 V). The charge-discharge and cyclic voltammetry measurements showed an obviously improved cyclic performance after coating Al₂O₃. The electrocatalytic activity is not clearly changed before and after coating Al₂O₃. From our systematical investigation, it could be concluded that the Al₂O₃-coated LiCoO₂ cathode is suitable for practical application in the potential range of 3.70～4.50 V vs. Li/Li⁺.     

Synergy of Cu/C3N4 Interface and Cu Nanoparticles Dual Catalytic Regions in Electrolysis of CO to Acetic Acid

Electrochemical reduction reaction of carbon monoxide (CORR) offers a promising way to manufacture acetic acid directly from gaseous CO and water at mild condition. Herein, we discovered that the graphitic carbon nitride (g-C₃N₄) supported Cu nanoparticles (Cu−CN) with the appropriate size showed a high acetate faradaic efficiency of 62.8 % with a partial current density of 188 mA cm⁻² in CORR. In situ experimental and density functional theory calculation studies revealed that the Cu/C₃N₄ interface and metallic Cu surface synergistically promoted CORR into acetic acid. The generation of pivotal intermediate −*CHO is advantage around the Cu/C₃N₄ interface and migrated *CHO facilitates acetic acid generation on metallic Cu surface with promoted *CHO coverage. Moreover, continuous production of acetic acid aqueous solution was achieved in a porous solid electrolyte reactor, indicating the great potential of Cu−CN catalyst in the industrial application.     

Cobalt and nitrogen codoped porous carbon as superior bifunctional electrocatalyst for oxygen reduction and hydrogen evolution reaction in alkaline medium

Metal (cobalt)/nitrogen codoped carbon was first fabricated by pyrolysis of coordinated “noncarbonizable” polymer as bifunctional catalyst for ORR and HER, which showed better electrocatalytic performances than most bifunctional doped carbon catalysts in alkaline electrolyte.     

一类二阶方程的极限边值问题

In this paper both the necessary and sufficient conditions for the existence of the solution of the boundary value problem x=X(t,x,x),px(0)+qx(0)=r,x(∞)=const.and the continuous dependence of the solution on the boundary value are investigated.     

Rationally Modulating the Functions of Ni3Sn2-NiSnOx Nanocomposite Electrocatalysts towards Enhanced Hydrogen Evolution Reaction

Identifying electrocatalysts with functions of easy dissociation of water, rapid transformation of hydroxyl and facile hydrogen-hydrogen bond formation are indispensable while challenge for realizing efficient alkaline hydrogen evolution reaction (HER). Herein, we presented the design of Ni₃Sn₂-NiSnO_x nanocomposites towards addressing this challenge. We showed that Ni₃Sn₂ possessed ideal hydrogen adsorption and low hydroxyl adsorption abilities and NiSnO_x facilitated water dissociation and hydroxyl transfer process, respectively. Consequently, the fine-tuned interplay of the two functional parts realized the mutual coordination among the multiple functions and led to significantly boosted HER kinetics. Current densities of 10 and 1000 mA cm⁻² were obtained at overpotentials of 14 and 165 mV on the optimized catalyst. This work highlights the significance of considering intrinsic interactions between active sites and all pertinent intermediates on obtaining promising electrocatalysts.     

Monolithic Phosphate Interphase for Highly Reversible and Stable Zn Metal Anode

Zinc metal battery (ZMB) is promising as the next generation of energy storage system, but challenges relating to dendrites and corrosion of the zinc anode are restricting its practical application. Here, to stabilize Zn anode, we report a controlled electrolytic method for a monolithic solid-electrolyte interphase (SEI) via a high dipole moment solvent dimethyl methylphosphonate (DMMP). The DMMP-based electrolytes can generate a homogeneous and robust phosphate SEI (Zn₃(PO₄)₂ and ZnP₂O₆). Benefiting from the protecting impact of this in situ monolithic SEI, the zinc electrode exhibits long-term cycling of 4700 h and a high Coulombic efficiency 99.89 % in Zn|Zn and Zn|Cu cell, respectively. The full V₂O₅|Zn battery with DMMP-H₂O hybrid electrolyte exhibits a high capacity retention of 82.2 % following 4000 cycles under 5 A g⁻¹. The first success in constructing the monolithic phosphate SEI will open a new avenue in electrolyte design for highly reversible and stable Zn metal anodes.     

Studies on ZnBr2-mediated synthesis of axially chiral aryl-substituted allenes from terminal alkynes,aromatic aldehydes and (S)-α,α-diphenylprolinol

The studies on the ZnBr₂-mediated synthesis of axially chiral aryl-substituted allenes from terminal alkynes, aromatic aldehydes, and commercially available chiral amine (S)-α,α-diphenylprolinol were conducted. Axially chiral aryl-substituted allenes can be obtained in moderate yields with up to 96% ee.     

气相色谱-负化学电离源-飞行时间质谱测定烟草中有机氯农药残留

采用QuEChERS前处理方法,建立了气相色谱-负化学电离源-飞行时间质谱(GC-NCI-TOF-MS)检测烟草中10种有机氯农药残留的分析方法。样品采用乙酸乙酯-正己烷(1 : 1, v/v)溶液提取,提取液经N-丙基乙二胺(PSA)、无水硫酸镁分散固相萃取净化,用GC-NCI-TOF-MS检测分析。根据有机氯化合物特征离子的精确质量数、同位素离子峰簇、碎片离子丰度比和保留时间对目标物定性鉴定,外标法定量。10种有机氯农药的线性关系良好,相关系数 (r²)均大于0.997;相对标准偏差小于6.5%;检出限为0.04~0.80 μ g/kg;加标回收率为77.2%~93.0%。该方法简单快速、灵敏度高、准确性好,适用于烟草中有机氯农药残留的定性分析和定量检测。