Photocrosslinked poly(vinylbenzophenone)‐core micelles via mild Friedel–Crafts benzoylation of polystyrene amphiphiles

Photocrosslinkable poly(vinylbenzophenone)‐containing polymers were synthesized via a one‐step, Friedel–Crafts benzoylation of polystyrene‐containing starting materials [including polystyrene, polystyrene‐block‐poly(tert‐butyl acrylate), polystyrene‐block‐poly(ethylene oxide), polystyrene‐block‐poly(methyl methacrylate), and polystyrene‐block‐poly(n‐butyl acrylate)] with benzoyl trifluoromethanesulfonate as a benzoylation reagent. The use of this mild reagent (which required no added Lewis acid) permitted polymers with well‐defined compositions and narrow molecular weight distributions to be synthesized. Micelles formed from one of these benzoylated polymers, [polystyrene_0.25‐co‐poly(vinylbenzophenone)_0.75]₁₁₅‐block‐poly(acrylic acid)₁₄, were then fixed by the irradiation of the micelle cores with UV light. As the irradiation time was increased, the pendent benzophenone groups crosslinked with other chains in the glassy micelle cores. Dynamic light scattering, spectrofluorimetry, and Fourier transform infrared spectroscopy were all used to verify the progress of the crosslinking reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2604–2614, 2006     

Synthetic modeling of the active site of native metalloenzymes by trimethylacetatozinc complexes

Synthetic approaches are discussed to a preparation of binuclear trimethylacetatozinc complexes containing an M₂(μ-OOCR)₂L₄ binuclear fragment, which is found in the active site of native metalloenzymes.     

Direct single-layered fabrication of 3D concavo–convex patterns in nano-stereolithography

A nano-surfacing process (NSP) is proposed to directly fabricate three-dimensional (3D) concavo–convex-shaped microstructures such as micro-lens arrays using two-photon polymerization (TPP), a promising technique for fabricating arbitrary 3D highly functional micro-devices. In TPP, commonly utilized methods for fabricating complex 3D microstructures to date are based on a layer-by-layer accumulating technique employing two-dimensional sliced data derived from 3D computer-aided design data. As such, this approach requires much time and effort for precise fabrication. In this work, a novel single-layer exposure method is proposed in order to improve the fabricating efficiency for 3D concavo–convex-shaped microstructures. In the NSP, 3D microstructures are divided into 13 sub-regions horizontally with consideration of the heights. Those sub-regions are then expressed as 13 characteristic colors, after which a multi-voxel matrix (MVM) is composed with the characteristic colors. Voxels with various heights and diameters are generated to construct 3D structures using a MVM scanning method. Some 3D concavo–convex-shaped microstructures were fabricated to estimate the usefulness of the NSP, and the results show that it readily enables the fabrication of single-layered 3D microstructures. PACS 85.40.Hp; 81.16.Nd; 42.82.Cr     

One-dimensional stochastic Burgers equation driven by Lévy processes

In this paper, we proved the global existence and uniqueness of the strong, weak and mild solutions for one-dimensional Burgers equation perturbed by a Poisson form process, a Poisson form and Q-Wiener process with the Dirichlet bounded condition. We also proved the existence of the invariant measure of these models.     

Multivariable identification and controller design of an integrated flight control system

This paper investigates the multivariable identification and controller design for the longitudinal channel of a Boeing 747 transport. The transfer function matrix of the system is identified using the prediction error (PE) identification method with multivariable ARX model. An ellipsoidal parametric uncertainty set is constructed from the covariance matrix of the identified parameters. It contains the parameters of actual system at a certain probability level. The identified models and the associated uncertainty sets are validated by measuring the worst-case ν-gap and then compared with the maximum value of the generalized stability margin. In automatic flight control system or autopilots, multiple specifications criteria are needed to be satisfied concurrently, such as good holding (small static altitude holding error), fast response, smooth transition (less oscillation, overshoot). The design of a Multiple Simultaneous Specifications (MSS) controller effectively and practically is a very significant and challenging job. Liu and Mills [H.H.T. Liu, J.K. Mills, Multiple specification design in flight control system, in: Proceedings of the American Control Conference, Chicago, Illinois, 2000, pp. 1365–1369] proposed a MSS controller design method using a convex combination approach. In this paper, we apply the method [H.H.T. Liu, J.K. Mills, Multiple specification design in flight control system, in: Proceedings of the American Control Conference, Chicago, Illinois, 2000, pp. 1365–1369; H.H.T. Liu, Design combination in integrated flight control, in: Proceedings of the American Control Conference, Arlington, Virginia, 2001, pp. 494–499; H.H.T. Liu, Multi-objective design for an integrated flight control system: a combination with model reduction approach, in: Proceedings of IEEE International Symposium on Computer Aided Control System Design, Glasgow, 2002, pp. 21–26] to design a MSS controller based on the identified models of the Boeing 747 transport aircraft longitudinal channel. The controllers are also validated by simulation using the true plant transfer functions.     

Local control of electric current driven shell etching of multiwalled carbon nanotubes

We report on a novel method for local control of shell engineering in multiwalled carbon nanotubes (MWNTs) using Joule-heating induced electric breakdown. By modulating the heat dissipation along a nanotube, we can confine its thinning and shell breakdown to occur within localized regions of peak temperatures, which are distributed over one-half of the NT length. The modulation is achieved by using suitably designed nanomachined heat sinks with different degrees of thermal coupling at different parts of a current-carrying nanotube. The location of electric breakdown occurs precisely at the regions of high temperatures predicted by the classical finite-element model of Joule heating in the MWNT. The experiments herein provide new insight into the electric breakdown mechanism and prove unambiguously that shell removal occurs due to thermal stress, underpinning the diffusive nature of MWNTs. The method demonstrated here has the potential to be a powerful tool in realizing MWNT bearings with complex architectures for use in integrated nanoelectromechanical systems (NEMS). In addition, the breakdown current and power in the nanotubes are significantly higher than those observed in nanotubes without heat removal via additional heat sinks. This indicates future avenues for enhancing the performance of MWNTs in electrical interconnect and nanoelectronic applications. PACS  73.63.Fg; 65.80.+n     

Numerical simulation of critical dependences for symmetric two-layered Josephson junctions

Partial critical dependences of the form current-magnetic field in a two-layered symmetric Josephson junction are modeled. A numerical experiment shows that, for the zero interaction coefficient between the layers of the junction, jumps of the critical currents corresponding to different distributions of the magnetic fluxes in the layers may appear on the critical curves. This fact allows a mathematical interpretation of the results of some recent experimental results for two-layered junctions as a consequence of discontinuities of partial critical curves.