Surface Modification of Nitrile Rubber by Plasma Polymerization

Radio frequency plasma polymerization of vinylidene fluoride was used to modify the surface properties of nitrile rubber. The chemistry and frictional properties of the plasma films were characterized. FTIR transmission spectra and EDX analysis of plasma polymer films deposited on NaCl windows showed that the degree of fluorination of the plasma polymers increased as plasma power was increased from 25 to 50 W, and then decreased monotonically at higher powers. An estimation of the actual F/C ratio from EDX data indicated that the plasma polymer films contained approximately one fluorine atom for every 2–5 carbon atoms. Sliding friction tests on a Delrin countersurface showed that the coefficient of friction of the plasma treated rubbers was lower than untreated rubber, but slighly higher than rubber coated with silicone oil. Repetitive sliding friction testing showed that silicone oil treated samples had a longer lubricating lifetime than plasma treated samples. However, cyclic friction tests conducted with nitrile rubber o-rings yielded similar frictional behavior and lubricating lifetimes for silicone oil and plasma treatments. There was no correlation between chemical composition and the frictional and wear properties of the plasma films. Environmental scanning electron micrographs showed that the plasma films were brittle and tended to crack and flake off during wear testing.     

Microwave spectrum and rotational isomers of ethyl fluoroformate

The microwave spectrum of ethyl fluoroformate displays strong a-type R branch transitions from two rotameric forms. One species (extended form) has rotational constants A₀ = 9191.3(9) MHz, B₀ = 2112.61(1) MHz, C₀ = 1756.73(1) MHz which are consistent with a syn-anti (τ₁(OCOC) = 0°, r₂(cocc) = 180°) planar heavy atom structure. The second species (compact form) has rotational constants A₀ = 7760(3) MHz, B₀ = 2388.38(4) MHz, C₀ = 2102.47(3) MHz which are consistent with a syn-gauche (τ₁(ococ) = 0°, τ₂(cocc) ˜ 90°) structure. The two conformational forms have approximately equal energy (0 ± 40 cm⁻¹). Four vibrational satellites of the extended species have been analyzed yielding a torsional frequency around the O-ethyl bond of 70(10) cm⁻¹. Three vibrational satellites attributed to the O-ethyl torsion of the compact species have been analyzed yielding a vibrational frequency of 90(10) cm⁻¹. Approximate Fourier coefficients of a three term potential function for internal rotation about the O-ethyl bond have been determined. Vibrational satellites attributed to the first excited states of the O-ester torsion have been analyzed for both conformers. The torsional vibrational frequency around the O-ester bond is 110(15) cm⁻¹ for the extended conformers and 120(20) cm⁻¹ for the compact.     

Capillary electrophoresis of cationic random coil peptide standards: effect of anionic ion-pairing reagents and comparison with reversed-phase chromatography

The present study compares a charge/hydrophobicity capillary electrophoresis (CE) approach to reversed-phase high-performance liquid chromatography (RP-HPLC) for the separation of three series of four synthetic, random coil peptide standards. Each series has peptides of the same positive charge (+1, +2 and +3 series) and length but differing in hydrophobicity. Complete resolution of the 12 peptides was achieved via a novel CE approach: a capillary zone electrophoresis (CZE) mode effected a separation of identically charged peptides; within each charged group of peptides, the addition of perfluorinated acid anionic ion-pairing reagents allowed resolution of the peptides through a mechanism based on peptide hydrophobicity which we have termed ioninteraction (II)-CZE. The peak capacity and peptide resolution of this CE approach was superior to that of RP-HPLC and stresses an important role for CE for peptide/proteomic applications.     

Formation of organolithium hetero-aggregates [Li4Ar2(nBu)2] (Ar=C6H4CH(Me)NMe2-2) during the directed ortho-lithiation of [1-(dimethylamino)ethyl]benzene

(R)-[1-(Dimethylamino)ethyl]benzene reacts with nBuLi in a 1:1 molar ratio in pentane to quantitatively yield a unique hetero-aggregate (2 a) containing the lithiated arene, unreacted nBuLi, and the complexed parent arene in a 1:1:1 ratio. As a model compound, [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)] (2 b) was prepared from the quantitative redistribution reaction of the parent lithiated arene Li(C(6)H(4)CH(Me)NMe(2)-2) with nBuLi in a 1:1 molar ratio. The mono-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))] (2 c) and the bis-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))(2)] (2 d) were obtained by re-crystallization of 2 b from pentane/Et(2)O and pure Et(2)O, respectively. The single-crystal X-ray structure determinations of 2 b-d show that the overall structural motifs of all three derivatives are closely related. They are all tetranuclear Li aggregates in which the four Li atoms are arranged in an almost regular tetrahedron. These structures can be described as consisting of two linked dimeric units: one Li(2)Ar(2) dimer and a hypothetical Li(2)nBu(2) dimer. The stereochemical aspects of the chiral Li(2)Ar(2) fragment are discussed. The structures as observed in the solid state are apparently retained in solution as revealed by a combination of cryoscopy and (1)H, (13)C, and (6)Li NMR spectroscopy.     

N-Allyl-1,3-oxazines via a facile keto-ene/cyclization tandem reaction

The intramolecular keto-ene/cyclization tandem reaction of γ-N-allylamino ketones is an effective means of producing 1,3-oxazines. The reaction usually requires high temperatures and/or pressures. We discovered that N,N-diallyl amines undergo the reaction at lower temperatures than their monoallyl analogs. An extreme example, 1-N,N-diallylamino-9,10-anthraquinone, undergoes the keto-ene reaction near ambient temperature. In the case of 1-N,N′-dialkylaminoanthraquinones, electron deficient ene components can even be used, allowing the preparation of a broad spectrum of oxazines. Furthermore, the N-allyl-1,3-oxazine can be easily deallylated to produce a 1,3-oxazine that contains a secondary amine.     

4-Aminobicyclo[2.2.2]octanone Derivatives with Antiplasmodial and Antitrypanosomal Activities

4-Aminobicyclo[2.2.2]octanones were converted to their N-oxides and to 4-aminobicyclo[2.2.2]octanes. Furthermore, the 6,7-bis-(4-methoxyphenyl) analogues were synthesized. All products were screened for their activities against Trypanosoma b. rhodesiense and Plasmodium falciparum. The pharmacological results were compared with those of formerly tested bicyclo[2.2.2]octanones and bicyclo[2.2.2]octanols. Structure-activity relationships are discussed.     

A fluorescence-based method for direct measurement of submicrosecond intramolecular contact formation in biopolymers: an exploratory study with polypeptides.

A fluorescent amino acid derivative (Fmoc-DBO) has been synthesized, which contains 2,3-diazabicyclo[2.2.2]oct-2-ene (DBO) as a small, hydrophilic fluorophore with an extremely long fluorescence lifetime (325 ns in H2O and 505 ns in D2O under air). Polypeptides containing both the DBO residue and an efficient fluorescence quencher allow the measurement of rate constants for intramolecular end-to-end contact formation. Bimolecular quenching experiments indicated that Trp, Cys, Met, and Tyr are efficient quenchers of DBO (k(q) = 20, 5.1, 4.5, and 3.6 x 10(8) M(-1) x s(-1) in D2O), while the other amino acids are inefficient. The quenching by Trp, which was selected as an intrinsic quencher, is presumed to involve exciplex-induced deactivation. Flexible, structureless polypeptides, Trp-(Gly-Ser)n-DBO-NH2, were prepared by standard solid-phase synthesis, and the rates of contact formation were measured through the intramolecular fluorescence quenching of DBO by Trp with time-correlated single-photon counting, laser flash photolysis, and steady-state fluorometry. Rate constants of 4.1, 6.8, 4.9, 3.1, 2.0, and 1.1 x 10(7) s(-1) for n = 0, 1, 2, 4, 6, and 10 were obtained. Noteworthy was the relatively slow quenching for the shortest peptide (n = 0). The kinetic data are in agreement with recent transient absorption studies of triplet probes for related peptides, but the rate constants are significantly larger. In contrast to the flexible structureless Gly-Ser polypeptides, the polyproline Trp-Pro4-DBO-NH2 showed insignificant fluorescence quenching, suggesting that a high polypeptide flexibility and the possibility of probe-quencher contact is essential to induce quenching. Advantages of the new fluorescence-based method for measuring contact formation rates in biopolymers include high accuracy, fast time range (100 ps-1 micros), and the possibility to perform measurements in water under air.     

The He-LiH potential energy surface revisited. II. Rovibrational energy transfer on a three-dimensional surface

We use our rigid rotor He-LiH potential energy surface [B. K. Taylor and R. J. Hinde, J. Phys. Chem. 111, 973 (1999)] as a starting point to develop a three-dimensional potential surface that describes the interaction between He and a rotating and vibrating LiH molecule. We use a fully quantum treatment of the collision dynamics on the current potential surface to compute rovibrational state-to-state cross sections. We compute excitation and relaxation vibrational rate constants as a function of temperature by integrating these cross sections over a Maxwell-Boltzmann translational energy distribution and summing over Boltzmann-weighted initial rotational levels. The rate constants for vibrational excitation of LiH are very small for temperatures below 300 K. Rate constants for vibrational relaxation of excited LiH molecules, however, are several orders of magnitude larger and show very little temperature dependence, suggesting that the collisions that result in vibrational relaxation are governed by long-range attractive interactions.     

Use of a native affinity ligand for the detection of G proteins by capillary isoelectric focusing with laser-induced fluorescence detection

Affinity probe capillary isoelectric focusing (CIEF) with laser-induced fluorescence was explored for detection of Ras-like G proteins. In the assay, a fluorescent BODIPY FL GTP analogue (BGTPgammaS) and G protein were incubated resulting in formation of BGTPgammaS-G protein complex. Excess BGTPgammaS was separated from BGTPgammaS-G protein complex by CIEF using a 3-10 pH gradient and detected in whole-column imaging mode. In other cases, a single point detector was used to detect zones during the focusing step of CIEF using a 2.5-5 pH gradient. In this case, analyte peaks passed the detector in approximately 5 min at an electric field of 350 V/cm. Detection during focusing allowed for more reproducible assays at shorter times but with a sacrifice in sensitivity compared to detection during mobilization. Resolution was adequate to separate BGTPgammaS-Ras and BGTPgammaS-Rab3A complexes. Formation of specific complexes was confirmed by adding GTPgammaS to samples containing BGTPgammaS-G protein. GTPgammaS competed with BGTPgammaS for G protein binding sites resulting in decreased BGTPgammaS-G protein peak heights. The concentrating effect of CIEF enabled detection limits of 30 pM.     

Positron binding energies for alkali hydrides

Ab initio multireference single- and double-excitation configuration interaction (MRD-CI) calculations are carried out to study the interactions of positrons with the members of the alkali hydride class of molecules. A new computer program has been constructed for this purpose that makes use of the Table-Direct-CI method for construction of the required Hamiltonian matrixes and electronic/positronic wave functions. The calculations indicate that the binding energy (positron affinity PA) of a single positron to these systems increases by an increment of 0.2-0.3 eV as the atomic number of the alkali atom is increased. It is found that the positron prefers a location in the more electronegative regions of such molecules, similarly as has been found in earlier calculations for the urea and acetone molecules. The positron orbital itself possesses a diffuse charge distribution with relatively small expectation values of the kinetic energy in all four systems considered. Each of the four positronic molecules is stable with respect to formation of either positronium (Ps) or HPs according to the present calculations. Relatively large changes in the equilibrium bond distance of the hydrides occur as a result of the positron interaction. The importance of bond dipole moments in producing the binding of positrons to molecules is discussed, as well as the role that the electronegativity of the constituent atoms plays in determining the magnitude of the PA for a given system.