Synthesis of 1,4-annulated cyclooctatetraenophanes based on a novel cubane building block approach

A general synthetic approach to strained 1,4-annulated cyclooctatetraene-based cyclophanes is described. A key feature in this approach is exploitation of the cubane core as a masked cyclooctatetraene synthon. Thus, 1,4-disubstituted cubanes 3 and 4 used as precursors to cyclooctatetraenophanes have been prepared in four steps from the readily available 1,4-cubanedicarboxaldehyde (5). The synthesis of 3 was effected by palladium/copper-mediated coupling of 1,4-bis[(Z,Z)-2-iodovinyl]cubane (6) and 1,4-bis[(Z,Z)-but-1-en-3-ynyl]cubane (8). For the synthesis of 4, on the other hand, modified Eglington-Glaser coupling was applied for the macrocyclization step. The general characteristic of Rh(I) to induce [2 + 2] cycloreversion of the cubane core to syn-tricyclo[4.2.0.0(2,5)]octa-3,7-diene followed by thermal rearrangement to cyclooctatetraene was applied as a key structural transformation toward targeted cyclooctatetraenophanes 1 and 2.     

Linear dichroism and fluorescence polarization of diphenyl polyenes in stretched polyethylene films

A study of the linear diehroism and fluorescence polarization of diphenylpolyenes (C₆H₅—(CH=CH)_n—C₆H₅) with n = 1,2,3,4,6,8 in stretched polyethylene films shows that the polyenes orient in the anisotropic matrix with their transition dipole (emission and absorption, π → π^*) aligned with the direction of stretch. The maximum dichroic ratio is observed for 1,6-diphenyl-1,3,5-hexatriene (DPH), with n = 3, whereas the values are substantially lower for n < 3 or n > 3. The high orientation of DPH and poor alignment of the higher polyenes may be accounted for in terms of the growing flexibility of the polyene chains with increasing chain length. The results justify the use of DPH as a convenient fluorescence probe for biological and synthetic membranes.     

FLUORESCENCE QUANTUM YIELDS AND LIFETIMES FOR BACTERIOCHLOROPHYLL c

Abstract— Absorption and emission spectra of bacteriochlorophyll c dissolved in a variety of solvents were measured and fluorescence quantum yields determined from the integrated emission spectra. Values for the emission maxima calculated from the positions and bandwidths of the red absorption band using the Stepanov relationship agreed closely with the experimental values. Fluorescence quantum yields varied between 0.10 in methanol and 0.36 in tetrahydrofuran and in dibutylamine. Fluorescence lifetimes were also determined for bacteriochlorophyll c in four of the solvents, and ranged from 2.7 ns in methanol to 7.6 ns in dimethylsulfoxide.     

PHOTOCHEMICAL PROPERTIES OF PORPHYRIN c: AN AGENT FOR USE IN TUMOR PHOTOTHERAPY

Abstract— The absorption and fluorescence properties of porphyrin c (P c ), the porphyrin chromophore present in cytochrome c , have been determined in several solvents and micellar environments. In aqueous buffer solutions at pH 7.5 Pc may exist in both a fluorescent monomeric form with quantum yield of fluorescence, (Φ_f,) ∼ 0.03, and fluorescence lifetime, (τ_f) ∼ 8 ns, and as a non-fluorescent aggregate. The proportion of monomeric form is higher in organic solvents and micelles but is reduced with increasing porphyrin concentrations in aqueous solutions. Porphyrin c readily complexes with Zn²⁺ to produce a fluorescent chelate (Zn-P c ) with Φ_f, ∼ 0.02 and τ_f, ∼ 2 ns at pH 7.5. The yields of singlet excited oxygen formation from Pc and the Zn-P c complex are higher than observed for hematoporphyrin derivative (HpD). Both P c and Zn-P c are effective agents in tumor phototherapy and do not induce the prolonged cutaneous photosensitivity observed with the use of HpD.     

A Remarkable Two-Step Synthesis of Diverse 1,4-Benzodiazepine-2,5-diones Using the Ugi Four-Component Condensation

A two-step, general synthesis of 1,4-benzodiazepine-2,5-diones (BZDs) is presented. This synthesis employs an Ugi four-component condensation using a convertible isocyanide (1-isocyanocyclohexene), followed by an acid-activated cyclization reaction. This synthesis represents a dramatically improved route to BZDs over those currently in the literature. In addition, since amino acids are not used as inputs, the potential for molecular diversity is much greater than that with existing syntheses. It was also found that BZDs substituted with methylenes at the C-3 and N-4 positions display conformational isomerism in the NMR spectra at room temperature. Variable-temperature NMR experiments support this observation and offer the interesting conclusion that the BZD core structure, in certain examples, might not be as rigid as previously supposed.     

Valence bond studies of AH2 molecules

Minimal basis set (STO) molecular orbital and valence-bond calculations are reported for the³ B ₁ and¹ A ₁ states of CH₂. The open-shell molecular orbital calculations used the Roothaan formulation. The valence-bond calculations used the Prosser-Hagstrom biorthogonalisation technique to evaluate the cofactors required in using Löwdin's formulae. Optimisation of geometry and orbital exponents in the molecular orbital calculation on the³ B ₁ state gave a geometry of R_C-H=2.11 a.u. and H-C-H=123.2 °. The energy obtained was ?38.8355 a.u. The molecular orbital and valencebond calculations are compared. In the valence-bond calculations the variation with bond-length and bond-angle of the configuration energies was studied. Valence bond “build-up” studies are also reported. Valence-bond calculations using hybrid orbitals instead of natural atomic orbitals showed that the perfect-pairing approximation is not as good for CH₂ as BeH₂. The nature of the lone-pair and bonding orbitals is found to be significantly different between the³ B ₁ and¹ A ₁ states. In the³ B ₁ state the 2s and 2p orbitals are fairly equally mixed between both types of orbital. However in the¹ A ₁ state the bonding orbitals have mainly 2p character and the lone pair orbitals have mainly 2s character. As was found for H₂O, the bonding hybrid orbitals do not follow the hydrogen nuclei as the bond angle varies but continue to point approximately in their equilibrium directions.     

Tetrakis(2-hydroxyphenyl)ethene and derivatives. A structurally preorganized tetradentate ligand system for polymetallic coordination chemistry and catalysis

A topologically unique, conformationally constrained tetradentate ligand system for polymetallic coordination chemistry has been developed: tetrakis(2-hydroxyphenyl)ethene (1a) and substituted derivatives. The design exploits the planarity of the tetraphenylethylene core to impart rigidity to the roughly square oxygen binding array, while maintaining a degree of conformational mobility associated with rotation about the aryl-ethylene carbon-carbon bonds. Tetrakis(2-hydroxyphenyl)ethene derivatives are designed to promote multiple metal bridging over chelating coordination modes. The ligand is synthesized from anisole or 4-tert-butylanisole in four steps via the 2,2'-dimethoxybenzophenone hydrazones 4a,b. The sterically hindered ortho-substituted tetraphenylethylene core is produced in high yield by acid-catalyzed decomposition of the corresponding diaryl diazomethane prepared in situ by oxidation of the hydrazone using nickel peroxide. Deprotection of the methyl ethers using boron tribromide gives tetrakis(2-hydroxyphenyl)ethene (1a), characterized by X-ray crystallography, and tetrakis(5-tert-butyl-2-hydroxyphenyl)ethene (1b). Sterically isolating substituents in the 3-position can be installed via Claisen rearrangement/hydrogenation, providing tetrakis(3-n-propyl-2-hydroxyphenyl)ethene (6) efficiently. To illustrate potential applications of this unprecedented ligand class, two coordination complexes are reported, including tetrakis(2-diethylaluminoxyphenyl)ethene (8), a structurally robust eight-membered-ring aluminum/oxygen crown complex characterized both in solution and in the solid state.     

Base-assisted intramolecular 6-acetoxypyranone-acetylene [5+2] cycloaddition. Synthesis and reactivity of novel oxa-tricyclo[5.3.1.0]undecenones

The synthesis of 3,11-dioxatricyclo[5.3.1.0^1,5]undeca-5,9-dien-8-ones is reported from suitable 5-substituted furfuryl alcohols bearing an acetylenic side-chain. Successive peracid-mediated oxidative rearrangement of furan carbinols and base-assisted intramolecular 1,3-dipolar cycloaddition afforded oxygen-bridged tricyclo-undecane derivatives. Stereoselective transformations of cycloadducts are also discussed.     

Efficient and fast Heck vinylation of 2-bromo-6-methyl pyridines with methylacrylate. Application to the synthesis of 6-methyl cyclopenta[b]pyridinone

Heck vinylation of 2-bromo-6-methyl-3-substituted pyridines using η³-allylpalladium chloride dimer/P(o-Tol)₃ complex/toluene and dimethylacetamide (DMA) as co-solvent with methyl acrylate is reported. Electronic and steric effects were investigated engaging diversely 2-bromo-3,6-disubstituted pyridines. As application, a new synthesis of the 6-methyl cyclopenta[b]pyridinone building-block connecting Heck vinylation, alkene reduction and Dieckmann condensation is described.     

Bis(fluoroalkyl)acrylic and methacrylic phosphate monomers, their polymers and some of their properties

Ten fluoromonomers of structure (R_FO)₂P(O)OCH₂CH₂OC(O)CRCH₂ were made in 30-64% yield by treating the chloridates (R_FO)₂P(O)Cl with HOCH₂CH₂OC(O)CRCH₂ in chloroform in the presence of triethylamine [R_F=CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂, C₄F₉CH₂, C₄F₉CH₂CH₂ or C₆F₁₃CH₂CH₂; R  H or Me]. The chloromonomer (CCl₃CH₂O)₂P(O)OCH₂CH₂OC(O)CHCH₂ was obtained analogously in 29% yield. Polymerisation of the acrylate monomers, but not the methacrylate monomers, could be effected using α-azoisobutyronitrile as a radical initiator. Acrylic polymers having CF₃CH₂O, CCl₃CH₂O and C₆F₁₃CH₂CH₂O side-chains were obtained as translucent rubbers. Specimens of cotton fabric were treated with solutions of the polymers, and average water and oil repellency ratings measured. Fabric coated with the polymer with the C₆F₁₃CH₂CH₂O side-chain afforded protection from penetration of the test liquids. Treated fabrics were subjected to the limiting oxygen index (LOI) test according to BS EN ISO 4589-2 (1999): this test determines the point at which a material just burns in a volumetric flow of oxygen and nitrogen. The treated fabrics were more fire-resistant (LOI 22-29%) than the untreated fabric (LOI 18%). Fabric coated with the CCl₃CH₂O-based polymer can be considered fire-retardant (LOI 29%). The fluoromonomers were tested for anti-acetylcholinesterase activity and were found to be poor enzyme inhibitors; they are predicted to possess low acute toxicity.