The Methoxycarbonylation of Vinyl Acetate Catalyzed by Palladium Complexes of [1,2‐Phenylenebis(methylene)]bis[di(tert‐butyl)phosphine]

Palladium complexes of [1,2‐phenylenebis(methylene)]bis[di(tert‐butyl)phosphine] ( 1 ) catalyze the methoxycarbonylation of vinyl acetate (= ethenyl acetate) in the presence of methanesulfonic acid (Scheme 1). High selectivities to ester products can be obtained if free phosphine ligand is in excess over the amount of added acid (Table 1). Selectivities to methyl 2‐acetoxypropanoate, a precursor to lactate esters, can be as high as 3.6 : 1 at low temperature and pressure (Table 2). Replacing ^tBu by ⁱPr groups leads to less‐active catalysts and lower selectivities to the branched product. Replacing the phenylene moiety by a naphthalenediyl moiety also gives lower activity, but with similar selectivity to the phenylene‐based analogues. Linear hydrocarbon‐chain linkers as the backbone instead of the phenylenebis(methylene) linker leads to poor catalysis, except for a propane‐1,3‐diyl linker, which gives good rates but poor branched selectivity (Table 5). The effect of different reaction conditions on the catalysis is discussed. The syntheses of the new xylene‐based diphosphines 2 – 5 with one to four ⁱPr groups replacing the ^tBu groups at the P‐atoms of 1 and of the ligands 6 and 7 based on 1,2‐ and 2,3‐dimethylnaphthalene are also described (Schemes 2 and 3).     

2-Mercaptomethyl-thiazolidines use conserved aromatic–S interactions to achieve broad-range inhibition of metallo-β-lactamases

Infections caused by multidrug resistant (MDR) bacteria are a major public health threat. Carbapenems are among the most potent antimicrobial agents that are commercially available to treat MDR bacteria. Bacterial production of carbapenem-hydrolysing metallo-β-lactamases (MBLs) challenges their safety and efficacy, with subclass B1 MBLs hydrolysing almost all β-lactam antibiotics. MBL inhibitors would fulfil an urgent clinical need by prolonging the lifetime of these life-saving drugs. Here we report the synthesis and activity of a series of 2-mercaptomethyl-thiazolidines (MMTZs), designed to replicate MBL interactions with reaction intermediates or hydrolysis products. MMTZs are potent competitive inhibitors of B1 MBLs in vitro (e.g., K_i = 0.44 μM vs. NDM-1). Crystal structures of MMTZ complexes reveal similar binding patterns to the most clinically important B1 MBLs (NDM-1, VIM-2 and IMP-1), contrasting with previously studied thiol-based MBL inhibitors, such as bisthiazolidines (BTZs) or captopril stereoisomers, which exhibit lower, more variable potencies and multiple binding modes. MMTZ binding involves thiol coordination to the Zn(ii) site and extensive hydrophobic interactions, burying the inhibitor more deeply within the active site than d/l-captopril. Unexpectedly, MMTZ binding features a thioether–π interaction with a conserved active-site aromatic residue, consistent with their equipotent inhibition and similar binding to multiple MBLs. MMTZs penetrate multiple Enterobacterales, inhibit NDM-1 in situ, and restore carbapenem potency against clinical isolates expressing B1 MBLs. Based on their inhibitory profile and lack of eukaryotic cell toxicity, MMTZs represent a promising scaffold for MBL inhibitor development. These results also suggest sulphur–π interactions can be exploited for general ligand design in medicinal chemistry.

Metallo-β-lactamases (MBLs) are major culprits of resistance to carbapenems in bacteria. A series of thiazolidines are potent MBL inhibitors, restoring the activity of carbapenems. Metal binding and sulphur–π interactions are key to inhibition.     

Synthesis of the branched-chain sugar aceric acid: a unique component of the pectic polysaccharide rhamnogalacturonan-II

Described herein is the synthesis of 3-C-carboxy-5-deoxy-L-xylose (aceric acid), a rare branched-chain sugar found in the complex pectic polysaccharide rhamnogalacturonan-II. The key synthetic step in the construction of aceric acid was the stereoselective addition of 2-trimethylsilyl thiazole to 5-deoxy-1,2-O-isopropylidene-alpha-L-erythro-pentofuran-3-ulose (2), which was prepared from L-xylose. The thiazole group was efficiently converted into the required carboxyl group via conventional transformations. Aceric acid was also synthesized by dihydroxylation of a 3-C-methylene derivative of 2 followed by oxidation of the resulting hydroxylmethyl group. The C-2 epimer of aceric acid was also synthesized using thiazole addition chemistry, starting from L-arabinose.     

Unified model to predict self-assembly of nonionic surfactants in solution and adsorption on solid or fluid hydrophobic surfaces: effect of molecular structure

We have developed a pseudo-phase model to predict the self-assembly of nonionic surfactants on hydrophobic solid or fluid interfaces and in bulk solution. The uniqueness of this model is that it provides the relationship between molecular structure and self-assembly in solution and on interfaces. This model requires the input of minimal new experimental data. The remaining model parameters may be calculated on the basis of the surfactant molecular structure. The validity of the model has been established by comparing predictions with a wide array of experimental data for nonionic surfactant adsorption at the hydrophobic solid-water interface and at the air-water interface. The same model is then used to predict the self-assembly in bulk solution. The model predictions for critical aggregation concentration, aggregate shapes, and adsorption isotherms of various surfactants are in good agreement with the experimental data available in the literature.     

Axial Site Occupancy by the Least Electronegative Ligands in Trigonal Bipyramidal Tetraoxyphosphoranes(1)

Analogous to the formation of CH(2)[(t-Bu)(2)C(6)H(2)O](2)P(Ph)(O(2)C(6)Cl(4)) (1), the new bicyclic tetraoxyphosphoranes CH(2)[(t-Bu)(2)C(6)H(2)O](2)P(Et)(O(2)C(6)Cl(4)) (3) and CH(2)[ClC(6)H(3)O](2)P(Ph)(O(2)C(6)Cl(4)) (4) were synthesized by the oxidative addition of the appropriate cyclic phosphines with o-tetrachlorobenzoquinone. For the formation of CH(2)[(t-Bu)(2)C(6)H(2)O](2)P(Ph)(O(2)C(2)Ph(2)) (2), a similar reaction was followed with the use of benzil (PhCOCOPh) in place of o-tetrachlorobenzoquinone. X-ray analysis of 1-3 revealed trigonal bipyramidal geometries and provided evidence for the first series of complexes in the absence of ring strain in which the least electronegative group, ethyl or phenyl, is located in an axial position, in violation of the electronegativity rule. Thus, the two oxygen-containing ring systems occupied two different sets of positions in the trigonal bipyramid (TBP) with the eight-membered rings at diequatorial sites. X-ray analysis of 4 revealed a trigonal bipyramidal geometry with electron-withdrawing chlorine substituents on each ring assumed the more conventional geometry with the rings occupying axial-equatorial positions and the phenyl group located in the remaining equatorial site. The fact that molecular mechanics calculations favorably reproduced the observed geometries suggests that a steric contribution associated with the ring tert-butyl groups for 1-3 is partly responsible in favoring diequatorial ring occupancy for the eight-membered ring. NMR data supported rigid pentacoordinated structures in solution at 23 degrees C. Phosphorane 1 crystallizes in the orthorhombic space group Fdd2 with a = 44.787(5) ?, b = 34.648(8) ?, c = 10.3709(9) ?, and Z = 16. Phosphorane 2 crystallizes in the orthorhombic space group Pna2(1) with a = 20.658(8) ?, b = 10.342(2) ?, c = 19.879(6) ?, and Z = 4. Phosphorane 3 crystallizes in the orthorhombic space group Pcmn with a = 9.807(2) ?, b = 16.632(4) ?, c = 23.355(3) ?, and Z = 4. Phosphorane 4 crystallizes in the monoclinic space group C2/c with a = 35.699(5) ?, b = 12.187(2) ?, c = 14.284(3) ?, beta = 107.08(1) degrees, and Z = 8. The final conventional unweighted residuals are 0.0395 (1), 0.0518 (2), 0.0540 (3), and 0.0868 (4).     

The multichannel reaction NH2 + NH2 at ambient temperature and low pressures

NH₂ profiles were measured in a discharge flow reactor at ambient temperature by monitoring reactants and products with an electron impact mass spectrometer. At the low pressures used (0.7 and 1.0 mbar) the gas-phase self-reaction is dominated by a ‘bimolecular’ H₂-eliminating exit channel with a rate coefficient of k_3b(300 K) = (1.3 ± 0.5) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ and leading to N₂H₂ + H₂ or NNH₂ + H₂. Although the wall loss for NH₂ radicals is relatively small (k_w ≈ 6–14 s⁻¹), the contribution to the overall NH₂ decay is important due to the relatively slow gas-phase reaction. The heterogeneous reaction yields N₂H₄ molecules.     

GC–MS analysis of phenolic compounds in fuels after conversion to trifluoroacetate esters

The GC–MS characteristics of trifluoroacetate esters of phenolic compounds are discussed. Linear temperature programmed retention indices and total ion current MS response factors of over 120 phenolic esters are reported. The main GC advantages from analysis of trifluoroacetate esters as compared to plain phenols are enhanced volatility and improved resolution. For example, the elution temperature of a given phenol is typically 50 °C greater than that of the corresponding trifluoroacetate ester. Also, while retention of compounds with two trifluoroacetate groups is only moderately greater than mono esters, underivatized dihydroxy compounds are very difficult to elute from any GC column. Complete resolution of isomeric C₀-, C₁- and C₂-alkylphenol esters is readily achieved on conventional fused silica GC columns; resolution of the corresponding underivatized compounds requires specialized GC columns with low temperature limits. In general, mass spectra of trifluoroacetate esters are more characteristic of a given structure than those of the corresponding phenols and may be more rigorously interpreted towards structural elucidation. A table in the report summarizes some of the more important spectral features used in compound identification. Example applications in analysis of coal-, shale- and petroleum-derived materials are presented. Selected ion monitoring is used to determine individual phenolic components in whole distillates; reconstructed ion chromatograms are used to illustrate distributions of selected species as a function of fuel storage and thermal stress.     

Influence of size,ellipticity and charge separation on the free energy of some aqueous bolaform electrolyte models

The free energy of some models of aqueous bolaform electrolytes have been calculated at the Debye-Hückel limiting law plus B ₂ level of approximation. The repulsive forces are modeled by hard spheres or hard ellipsoids. The charges are placed either at the center of the sphere or at the foci of the ellipsoid. Parameters were chosen to approximate the size and shape of sodium and calcium p-benzenedisufonate and sodium 4,4-biphenyldisulfonate. The results show that contrary to the standard explanations for the unusual properties of bolaform electrolytes, separating the charges has little effect on the excess free energy. It is also shown that changing from a sphere to an ellipse has little effect on the excess free energy. The most important determinates of the properties of these salts are the sizes of the ions. Agreement of the model calculations with experimental results is reasonable considering the simplicity of the models.     

Bench Scale Studies of the Soil Aeration Process for Bioremediation of Petroleum Hydrocarbons

An alternative to traditional hydrocarbon bioremediation is to pump air through unsaturated soils to create aerobic conditions and induce biodegradation. This study examines the effects of moisture and nutrient augmentation on biodegradation of petroleum hydrocarbons in aerated soils. Findings indicate that forced aeration, coupled with additions of nutrients and moisture, stimulate hydrocarbon-degrading microorganisms and present a feasible approach to bioremediation management.     

A novel process for anaerobic composting of municipal solid waste

A novel process has been developed and evaluated in a pilotscale program for conversion of the biodegradable fraction of municipal solid waste (MSW) to methane via anaerobic composting. The sequential batch anaerobic composting (SEBAC) process employs leachate management to provide organisms, moisture, and nutrients required for rapid conversion of MSW and removal of inhibitory fermentation products during start-up. The biodegradable organic materials are converted to methane and carbon dioxide in 21–42 d, rather than the years required in landfills.